On Thu, Oct 27, 2016 at 10:35 PM, Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote: > Hi, > > On Tue, Oct 25, 2016 at 08:42:26AM +0800, Chen-Yu Tsai wrote: >> On Mon, Oct 24, 2016 at 10:40 PM, Maxime Ripard >> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote: >> > Hi, >> > >> > On Fri, Oct 21, 2016 at 11:15:32AM +0800, Chen-Yu Tsai wrote: >> >> On Tue, Oct 18, 2016 at 4:46 PM, Maxime Ripard >> >> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote: >> >> > The planes can do more than what was previously exposed. Add support for >> >> > them. >> >> > >> >> > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> >> >> > --- >> >> > drivers/gpu/drm/sun4i/sun4i_backend.c | 20 ++++++++++++++++++++ >> >> > drivers/gpu/drm/sun4i/sun4i_layer.c | 6 ++++++ >> >> > 2 files changed, 26 insertions(+) >> >> > >> >> > diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c >> >> > index afb7ddf660ef..b184a476a480 100644 >> >> > --- a/drivers/gpu/drm/sun4i/sun4i_backend.c >> >> > +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c >> >> > @@ -96,6 +96,22 @@ static int sun4i_backend_drm_format_to_layer(struct drm_plane *plane, >> >> > *mode = SUN4I_BACKEND_LAY_FBFMT_ARGB8888; >> >> > break; >> >> > >> >> > + case DRM_FORMAT_ARGB4444: >> >> > + *mode = SUN4I_BACKEND_LAY_FBFMT_ARGB4444; >> >> > + break; >> >> > + >> >> > + case DRM_FORMAT_ARGB1555: >> >> > + *mode = SUN4I_BACKEND_LAY_FBFMT_ARGB1555; >> >> > + break; >> >> > + >> >> > + case DRM_FORMAT_RGBA5551: >> >> > + *mode = SUN4I_BACKEND_LAY_FBFMT_RGBA5551; >> >> > + break; >> >> > + >> >> > + case DRM_FORMAT_RGBA4444: >> >> > + *mode = SUN4I_BACKEND_LAY_FBFMT_RGBA4444; >> >> >> >> The A20 manual only lists ARGB4444, not RGBA4444. There might be >> >> some discrepancy here. We can deal with them >> > >> > Hmm, yes, that's weird. But I guess this would be part of porting it >> > to the A20. >> > >> >> Also there are some more formats missing from the list, could you >> >> add them as well? >> > >> > Which one do you refer to? >> >> RGB556 and RGB655. > > These formats are not supported by Linux yet though. I see. Sorry for the noise. Acked-by: Chen-Yu Tsai <wens@xxxxxxxx> > > Thanks, > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
