From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> This series would appear to be enough to avoid kernel oopses when trying to restore the fbdev setup after a MST device has been yanked. Apparently we still have some problems left in actually reacting properly to the changed situation, but at least the kernel no longer explodes. Entire series available here: git://github.com/vsyrjala/linux.git dp_mst_fixes_3 Cc: Carlos Santa <carlos.santa@xxxxxxxxx> Cc: Kirill A. Shutemov <kirill@xxxxxxxxxxxxx> Ville Syrjälä (4): drm/fb-helper: Fix connector ref leak on error drm/fb-helper: Keep references for the current set of used connectors drm/dp/mst: Clear port->pdt when tearing down the i2c adapter drm/dp/mst: Check peer device type before attempting EDID read drivers/gpu/drm/drm_dp_mst_topology.c | 7 ++++++- drivers/gpu/drm/drm_fb_helper.c | 32 ++++++++++++++++++++++++-------- 2 files changed, 30 insertions(+), 9 deletions(-) -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel