On Fri, Oct 21, 2016 at 10:22:45PM +0300, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Now that all drivers have been converted over to the per-plane rotation
> property, we can just nuke the global rotation property.
>
> v2: Rebase due to BIT(),__builtin_ffs() & co.
> Deal with superfluous code shuffling
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
Merged up to this patch. I think it's better to land the follow-up i915
patches through drm-intel. I'll do backmerges next week anyway, you won't
need to wait long.
Thanks, Daniel
> ---
> drivers/gpu/drm/drm_atomic.c | 6 ++----
> drivers/gpu/drm/drm_blend.c | 32 ++++----------------------------
> drivers/gpu/drm/drm_fb_helper.c | 7 +------
> include/drm/drm_blend.h | 2 --
> include/drm/drm_crtc.h | 5 -----
> 5 files changed, 7 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index f81706387889..1b5a32df9a9a 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -705,8 +705,7 @@ int drm_atomic_plane_set_property(struct drm_plane *plane,
> state->src_w = val;
> } else if (property == config->prop_src_h) {
> state->src_h = val;
> - } else if (property == config->rotation_property ||
> - property == plane->rotation_property) {
> + } else if (property == plane->rotation_property) {
> if (!is_power_of_2(val & DRM_ROTATE_MASK))
> return -EINVAL;
> state->rotation = val;
> @@ -766,8 +765,7 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
> *val = state->src_w;
> } else if (property == config->prop_src_h) {
> *val = state->src_h;
> - } else if (property == config->rotation_property ||
> - property == plane->rotation_property) {
> + } else if (property == plane->rotation_property) {
> *val = state->rotation;
> } else if (property == plane->zpos_property) {
> *val = state->zpos;
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index e52aece30900..1f2412c7ccfd 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -89,7 +89,7 @@
> * On top of this basic transformation additional properties can be exposed by
> * the driver:
> *
> - * - Rotation is set up with drm_mode_create_rotation_property(). It adds a
> + * - Rotation is set up with drm_plane_create_rotation_property(). It adds a
> * rotation and reflection step between the source and destination rectangles.
> * Without this property the rectangle is only scaled, but not rotated or
> * reflected.
> @@ -105,18 +105,12 @@
> */
>
> /**
> - * drm_mode_create_rotation_property - create a new rotation property
> - * @dev: DRM device
> + * drm_plane_create_rotation_property - create a new rotation property
> + * @plane: drm plane
> + * @rotation: initial value of the rotation property
> * @supported_rotations: bitmask of supported rotations and reflections
> *
> * This creates a new property with the selected support for transformations.
> - * The resulting property should be stored in @rotation_property in
> - * &drm_mode_config. It then must be attached to each plane which supports
> - * rotations using drm_object_attach_property().
> - *
> - * FIXME: Probably better if the rotation property is created on each plane,
> - * like the zpos property. Otherwise it's not possible to allow different
> - * rotation modes on different planes.
> *
> * Since a rotation by 180° degress is the same as reflecting both along the x
> * and the y axis the rotation property is somewhat redundant. Drivers can use
> @@ -144,24 +138,6 @@
> * rotation. After reflection, the rotation is applied to the image sampled from
> * the source rectangle, before scaling it to fit the destination rectangle.
> */
> -struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
> - unsigned int supported_rotations)
> -{
> - static const struct drm_prop_enum_list props[] = {
> - { __builtin_ffs(DRM_ROTATE_0) - 1, "rotate-0" },
> - { __builtin_ffs(DRM_ROTATE_90) - 1, "rotate-90" },
> - { __builtin_ffs(DRM_ROTATE_180) - 1, "rotate-180" },
> - { __builtin_ffs(DRM_ROTATE_270) - 1, "rotate-270" },
> - { __builtin_ffs(DRM_REFLECT_X) - 1, "reflect-x" },
> - { __builtin_ffs(DRM_REFLECT_Y) - 1, "reflect-y" },
> - };
> -
> - return drm_property_create_bitmask(dev, 0, "rotation",
> - props, ARRAY_SIZE(props),
> - supported_rotations);
> -}
> -EXPORT_SYMBOL(drm_mode_create_rotation_property);
> -
> int drm_plane_create_rotation_property(struct drm_plane *plane,
> unsigned int rotation,
> unsigned int supported_rotations)
> diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
> index e0d428f9d1cb..83dbae0fabcf 100644
> --- a/drivers/gpu/drm/drm_fb_helper.c
> +++ b/drivers/gpu/drm/drm_fb_helper.c
> @@ -392,15 +392,10 @@ static int restore_fbdev_mode(struct drm_fb_helper *fb_helper)
> if (plane->type != DRM_PLANE_TYPE_PRIMARY)
> drm_plane_force_disable(plane);
>
> - if (plane->rotation_property) {
> + if (plane->rotation_property)
> drm_mode_plane_set_obj_prop(plane,
> plane->rotation_property,
> DRM_ROTATE_0);
> - } else if (dev->mode_config.rotation_property) {
> - drm_mode_plane_set_obj_prop(plane,
> - dev->mode_config.rotation_property,
> - DRM_ROTATE_0);
> - }
> }
>
> for (i = 0; i < fb_helper->crtc_count; i++) {
> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
> index fd351924e1c5..13221cf9b3eb 100644
> --- a/include/drm/drm_blend.h
> +++ b/include/drm/drm_blend.h
> @@ -52,8 +52,6 @@ static inline bool drm_rotation_90_or_270(unsigned int rotation)
> return rotation & (DRM_ROTATE_90 | DRM_ROTATE_270);
> }
>
> -struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
> - unsigned int supported_rotations);
> int drm_plane_create_rotation_property(struct drm_plane *plane,
> unsigned int rotation,
> unsigned int supported_rotations);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 284c1b3aec10..bc860cfc67ca 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1156,11 +1156,6 @@ struct drm_mode_config {
> */
> struct drm_property *plane_type_property;
> /**
> - * @rotation_property: Optional property for planes or CRTCs to specifiy
> - * rotation.
> - */
> - struct drm_property *rotation_property;
> - /**
> * @prop_src_x: Default atomic plane property for the plane source
> * position in the connected &drm_framebuffer.
> */
> --
> 2.7.4
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
