On Tue, Oct 04, 2016 at 05:29:21PM +0200, Peter Rosin wrote:
> From: Gustaf Lindström <gl@xxxxxxxxxx>
>
> The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel.
>
> The simple-panel driver is used to get support for essential
> functionality of the panel.
>
> Signed-off-by: Gustaf Lindström <gl@xxxxxxxxxx>
> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 85143d1b9b31..58cfe0a7a9d6 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1386,6 +1386,30 @@ static const struct panel_desc sharp_lq123p1jx31 = {
> },
> };
>
> +static const struct drm_display_mode sharp_lq150x1lg11_mode = {
> + .clock = 71100,
> + .hdisplay = 1024,
> + .hsync_start = 1024 + 168,
> + .hsync_end = 1024 + 168 + 64,
> + .htotal = 1024 + 168 + 64 + 88,
> + .vdisplay = 768,
> + .vsync_start = 768 + 37,
> + .vsync_end = 768 + 37 + 2,
> + .vtotal = 768 + 37 + 2 + 8,
> + .vrefresh = 60,
> +};
> +
> +static const struct panel_desc sharp_lq150x1lg11 = {
> + .modes = &sharp_lq150x1lg11_mode,
> + .num_modes = 1,
> + .bpc = 8,
> + .size = {
> + .width = 304,
> + .height = 228,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB565_1X16,
This doesn't match the .bpc = 8 above. You'd usually use a .bpc = 6 for
RGB565 panels.
Thierry
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
