Hello ,
All is fine except i can't change resolution on my second monitor vga
(reported as DVI-I-2 )
(tv in fact) anymore
with my 9400gt.
Now , i'm on :
linux-2.6.39-gentoo-r1
xorg-server-1.10.2
xf86-video-nouveau-0.0.16_pre20110323
libdrm-2.4.25
whatever i valid with xrandr is not really do on my tv
although xrandr say it's good , my tv always report 1202x670 50hz
I tried with and without xorg.conf
My last kernel working is linux-2.6.36-gentoo-r6.
see you.
[ 17.528]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 17.528] X Protocol Version 11, Revision 0
[ 17.528] Build Operating System: Linux 2.6.36-test x86_64 Gentoo
[ 17.528] Current Operating System: Linux funky64 2.6.39-gentoo-r1 #1 SMP PREEMPT Fri Jun 10 17:18:16 CEST 2011 x86_64
[ 17.528] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-gentoo-r1 root=/dev/sda1 ro rootfstype=ext4 log_buf_len=1M
[ 17.528] Build Date: 10 June 2011 01:16:32PM
[ 17.528]
[ 17.528] Current version of pixman: 0.22.0
[ 17.528] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.528] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.528] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 10 18:16:30 2011
[ 17.599] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.599] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17.689] (==) No Layout section. Using the first Screen section.
[ 17.689] (==) No screen section available. Using defaults.
[ 17.689] (**) |-->Screen "Default Screen Section" (0)
[ 17.689] (**) | |-->Monitor "<default monitor>"
[ 17.689] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.689] (==) Automatically adding devices
[ 17.690] (==) Automatically enabling devices
[ 17.714] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 17.714] Entry deleted from font path.
[ 17.714] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17.714] Entry deleted from font path.
[ 17.758] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 17.758] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 17.758] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.758] (II) Loader magic: 0x7d60a0
[ 17.758] (II) Module ABI versions:
[ 17.758] X.Org ANSI C Emulation: 0.4
[ 17.758] X.Org Video Driver: 10.0
[ 17.758] X.Org XInput driver : 12.2
[ 17.758] X.Org Server Extension : 5.0
[ 17.759] (--) PCI:*(0:2:0:0) 10de:0641:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288
[ 17.759] (II) Open ACPI successful (/var/run/acpid.socket)
[ 17.759] (II) LoadModule: "extmod"
[ 17.834] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 17.851] (II) Module extmod: vendor="X.Org Foundation"
[ 17.851] compiled for 1.10.2, module version = 1.0.0
[ 17.851] Module class: X.Org Server Extension
[ 17.851] ABI class: X.Org Server Extension, version 5.0
[ 17.851] (II) Loading extension MIT-SCREEN-SAVER
[ 17.851] (II) Loading extension XFree86-VidModeExtension
[ 17.851] (II) Loading extension XFree86-DGA
[ 17.851] (II) Loading extension DPMS
[ 17.851] (II) Loading extension XVideo
[ 17.851] (II) Loading extension XVideo-MotionCompensation
[ 17.851] (II) Loading extension X-Resource
[ 17.851] (II) LoadModule: "dbe"
[ 17.852] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 17.852] (II) Module dbe: vendor="X.Org Foundation"
[ 17.853] compiled for 1.10.2, module version = 1.0.0
[ 17.853] Module class: X.Org Server Extension
[ 17.853] ABI class: X.Org Server Extension, version 5.0
[ 17.853] (II) Loading extension DOUBLE-BUFFER
[ 17.853] (II) LoadModule: "glx"
[ 17.853] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 17.864] (II) Module glx: vendor="X.Org Foundation"
[ 17.864] compiled for 1.10.2, module version = 1.0.0
[ 17.864] ABI class: X.Org Server Extension, version 5.0
[ 17.864] (==) AIGLX enabled
[ 17.864] (II) Loading extension GLX
[ 17.864] (II) LoadModule: "record"
[ 17.864] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 17.873] (II) Module record: vendor="X.Org Foundation"
[ 17.873] compiled for 1.10.2, module version = 1.13.0
[ 17.873] Module class: X.Org Server Extension
[ 17.873] ABI class: X.Org Server Extension, version 5.0
[ 17.873] (II) Loading extension RECORD
[ 17.873] (II) LoadModule: "dri"
[ 17.873] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 17.896] (II) Module dri: vendor="X.Org Foundation"
[ 17.896] compiled for 1.10.2, module version = 1.0.0
[ 17.896] ABI class: X.Org Server Extension, version 5.0
[ 17.896] (II) Loading extension XFree86-DRI
[ 17.896] (II) LoadModule: "dri2"
[ 17.896] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 17.897] (II) Module dri2: vendor="X.Org Foundation"
[ 17.897] compiled for 1.10.2, module version = 1.2.0
[ 17.897] ABI class: X.Org Server Extension, version 5.0
[ 17.897] (II) Loading extension DRI2
[ 17.897] (==) Matched nouveau as autoconfigured driver 0
[ 17.897] (==) Matched vesa as autoconfigured driver 1
[ 17.897] (==) Matched fbdev as autoconfigured driver 2
[ 17.897] (==) Assigned the driver to the xf86ConfigLayout
[ 17.897] (II) LoadModule: "nouveau"
[ 17.897] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 17.985] (II) Module nouveau: vendor="X.Org Foundation"
[ 17.985] compiled for 1.10.2, module version = 0.0.16
[ 17.985] Module class: X.Org Video Driver
[ 17.985] ABI class: X.Org Video Driver, version 10.0
[ 17.985] (II) LoadModule: "vesa"
[ 18.002] (WW) Warning, couldn't open module vesa
[ 18.002] (II) UnloadModule: "vesa"
[ 18.002] (II) Unloading vesa
[ 18.002] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 18.002] (II) LoadModule: "fbdev"
[ 18.002] (WW) Warning, couldn't open module fbdev
[ 18.002] (II) UnloadModule: "fbdev"
[ 18.002] (II) Unloading fbdev
[ 18.002] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.002] (II) NOUVEAU driver
[ 18.002] (II) NOUVEAU driver for NVIDIA chipset families :
[ 18.002] RIVA TNT (NV04)
[ 18.002] RIVA TNT2 (NV05)
[ 18.002] GeForce 256 (NV10)
[ 18.002] GeForce 2 (NV11, NV15)
[ 18.002] GeForce 4MX (NV17, NV18)
[ 18.002] GeForce 3 (NV20)
[ 18.002] GeForce 4Ti (NV25, NV28)
[ 18.003] GeForce FX (NV3x)
[ 18.003] GeForce 6 (NV4x)
[ 18.003] GeForce 7 (G7x)
[ 18.003] GeForce 8 (G8x)
[ 18.003] GeForce GTX 200 (NVA0)
[ 18.003] GeForce GTX 400 (NVC0)
[ 18.003] (++) using VT number 7
[ 18.005] drmOpenDevice: node name is /dev/dri/card0
[ 18.005] drmOpenDevice: open result is 8, (OK)
[ 18.005] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 18.005] drmOpenDevice: node name is /dev/dri/card0
[ 18.005] drmOpenDevice: open result is 8, (OK)
[ 18.005] drmOpenByBusid: drmOpenMinor returns 8
[ 18.005] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 18.005] (II) [drm] nouveau interface version: 0.0.16
[ 18.005] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 18.005] (II) Loading sub module "dri"
[ 18.005] (II) LoadModule: "dri"
[ 18.005] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 18.005] (II) Module dri: vendor="X.Org Foundation"
[ 18.005] compiled for 1.10.2, module version = 1.0.0
[ 18.005] ABI class: X.Org Server Extension, version 5.0
[ 18.005] (II) NOUVEAU(0): Loaded DRI module
[ 18.005] drmOpenDevice: node name is /dev/dri/card0
[ 18.005] drmOpenDevice: open result is 9, (OK)
[ 18.005] drmOpenDevice: node name is /dev/dri/card0
[ 18.005] drmOpenDevice: open result is 9, (OK)
[ 18.005] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 18.005] drmOpenDevice: node name is /dev/dri/card0
[ 18.005] drmOpenDevice: open result is 9, (OK)
[ 18.005] drmOpenByBusid: drmOpenMinor returns 9
[ 18.005] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 18.005] (II) [drm] DRM interface version 1.4
[ 18.006] (II) [drm] DRM open master succeeded.
[ 18.006] (--) NOUVEAU(0): Chipset: "NVIDIA NV96"
[ 18.006] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.006] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 18.006] (==) NOUVEAU(0): RGB weight 888
[ 18.006] (==) NOUVEAU(0): Default visual is TrueColor
[ 18.006] (==) NOUVEAU(0): Using HW cursor
[ 18.006] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 18.006] (==) NOUVEAU(0): Page flipping enabled
[ 18.140] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 18.669] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 18.774] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 18.774] (II) NOUVEAU(0): Manufacturer: ACR Model: ad74 Serial#: 1684015472
[ 18.774] (II) NOUVEAU(0): Year: 2006 Week: 46
[ 18.774] (II) NOUVEAU(0): EDID Version: 1.3
[ 18.774] (II) NOUVEAU(0): Digital Display Input
[ 18.774] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 18.774] (II) NOUVEAU(0): Gamma: 2.20
[ 18.774] (II) NOUVEAU(0): DPMS capabilities: Off
[ 18.774] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 18.774] (II) NOUVEAU(0): Default color space is primary color space
[ 18.774] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 18.774] (II) NOUVEAU(0): redX: 0.644 redY: 0.348 greenX: 0.286 greenY: 0.603
[ 18.774] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 18.774] (II) NOUVEAU(0): Supported established timings:
[ 18.774] (II) NOUVEAU(0): 720x400@70Hz
[ 18.774] (II) NOUVEAU(0): 640x480@60Hz
[ 18.774] (II) NOUVEAU(0): 640x480@67Hz
[ 18.774] (II) NOUVEAU(0): 640x480@72Hz
[ 18.774] (II) NOUVEAU(0): 640x480@75Hz
[ 18.774] (II) NOUVEAU(0): 800x600@56Hz
[ 18.774] (II) NOUVEAU(0): 800x600@60Hz
[ 18.774] (II) NOUVEAU(0): 800x600@72Hz
[ 18.774] (II) NOUVEAU(0): 800x600@75Hz
[ 18.774] (II) NOUVEAU(0): 832x624@75Hz
[ 18.774] (II) NOUVEAU(0): 1024x768@60Hz
[ 18.774] (II) NOUVEAU(0): 1024x768@70Hz
[ 18.774] (II) NOUVEAU(0): 1024x768@75Hz
[ 18.774] (II) NOUVEAU(0): 1280x1024@75Hz
[ 18.774] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 18.774] (II) NOUVEAU(0): Supported standard timings:
[ 18.774] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 18.774] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 18.774] (II) NOUVEAU(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 18.774] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 18.774] (II) NOUVEAU(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 18.774] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 18.774] (II) NOUVEAU(0): #6: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 18.774] (II) NOUVEAU(0): #7: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 18.774] (II) NOUVEAU(0): Supported detailed timing:
[ 18.774] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 473 x 296 mm
[ 18.774] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 18.774] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 18.774] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 165 MHz
[ 18.774] (II) NOUVEAU(0): Monitor name: Acer AL2216W
[ 18.774] (II) NOUVEAU(0): Serial No: L74090463820
[ 18.774] (II) NOUVEAU(0): EDID (in hex):
[ 18.774] (II) NOUVEAU(0): 00ffffffffffff00047274ad70096064
[ 18.774] (II) NOUVEAU(0): 2e100103e82f1e782ec585a459499a24
[ 18.774] (II) NOUVEAU(0): 125054bfef0081808140714f9500950f
[ 18.774] (II) NOUVEAU(0): b30081c08bc021399030621a274068b0
[ 18.774] (II) NOUVEAU(0): 3600d9281100001c000000fd00384c1e
[ 18.774] (II) NOUVEAU(0): 5210000a202020202020000000fc0041
[ 18.774] (II) NOUVEAU(0): 63657220414c32323136570a000000ff
[ 18.774] (II) NOUVEAU(0): 004c373430393034363338323020002f
[ 18.774] (II) NOUVEAU(0): EDID vendor "ACR", prod id 44404
[ 18.786] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 18.786] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 18.786] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 18.786] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1366x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 18.786] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 18.786] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.786] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19.290] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 19.290] (II) NOUVEAU(0): Manufacturer: BEK Model: 3233 Serial#: 51100001
[ 19.290] (II) NOUVEAU(0): Year: 2005 Week: 49
[ 19.290] (II) NOUVEAU(0): EDID Version: 1.3
[ 19.290] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 19.290] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
[ 19.290] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 70 vert.: 40
[ 19.290] (II) NOUVEAU(0): Gamma: 2.20
[ 19.290] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 19.290] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 19.291] (II) NOUVEAU(0): redX: 0.648 redY: 0.331 greenX: 0.276 greenY: 0.601
[ 19.291] (II) NOUVEAU(0): blueX: 0.142 blueY: 0.074 whiteX: 0.282 whiteY: 0.293
[ 19.291] (II) NOUVEAU(0): Supported established timings:
[ 19.291] (II) NOUVEAU(0): 720x400@70Hz
[ 19.291] (II) NOUVEAU(0): 640x480@60Hz
[ 19.291] (II) NOUVEAU(0): 640x480@67Hz
[ 19.291] (II) NOUVEAU(0): 640x480@72Hz
[ 19.291] (II) NOUVEAU(0): 640x480@75Hz
[ 19.291] (II) NOUVEAU(0): 800x600@56Hz
[ 19.291] (II) NOUVEAU(0): 800x600@60Hz
[ 19.291] (II) NOUVEAU(0): 800x600@72Hz
[ 19.291] (II) NOUVEAU(0): 800x600@75Hz
[ 19.291] (II) NOUVEAU(0): 832x624@75Hz
[ 19.291] (II) NOUVEAU(0): 1024x768@60Hz
[ 19.291] (II) NOUVEAU(0): 1024x768@70Hz
[ 19.291] (II) NOUVEAU(0): 1024x768@75Hz
[ 19.291] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 19.291] (II) NOUVEAU(0): Supported detailed timing:
[ 19.291] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 708 x 398 mm
[ 19.291] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 19.291] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 19.291] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 61 kHz, PixClock max 85 MHz
[ 19.291] (II) NOUVEAU(0): Serial No: 525000000
[ 19.291] (II) NOUVEAU(0): Monitor name: BEKO-VJAZ1
[ 19.291] (II) NOUVEAU(0): EDID (in hex):
[ 19.291] (II) NOUVEAU(0): 00ffffffffffff0008ab333261b90b03
[ 19.291] (II) NOUVEAU(0): 310f01030e4628782a3f44a654469924
[ 19.291] (II) NOUVEAU(0): 13484bbfee0001010101010101010101
[ 19.291] (II) NOUVEAU(0): 010101010101011d00bc52d01e20b828
[ 19.291] (II) NOUVEAU(0): 5540c48e2100001e000000fd00384c1f
[ 19.291] (II) NOUVEAU(0): 3d08000a202020202020000000ff0035
[ 19.291] (II) NOUVEAU(0): 32353030303030300a202020000000fc
[ 19.291] (II) NOUVEAU(0): 0042454b4f2d564a415a310a2020006d
[ 19.291] (II) NOUVEAU(0): Printing probed modes for output DVI-I-2
[ 19.291] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19.291] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19.291] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 19.291] (II) NOUVEAU(0): Output DVI-I-2 connected
[ 19.291] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 19.291] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1280x720
[ 19.291] (II) NOUVEAU(0): Output DVI-I-2 using initial mode 1280x720
[ 19.291] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.291] (--) NOUVEAU(0): Virtual size is 1280x720 (pitch 0)
[ 19.291] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 37.5 kHz, 50.0 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19.291] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 19.291] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19.291] (**) NOUVEAU(0): Display dimensions: (470, 300) mm
[ 19.291] (**) NOUVEAU(0): DPI set to (69, 60)
[ 19.291] (II) Loading sub module "fb"
[ 19.291] (II) LoadModule: "fb"
[ 19.291] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 19.305] (II) Module fb: vendor="X.Org Foundation"
[ 19.305] compiled for 1.10.2, module version = 1.0.0
[ 19.305] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.305] (II) Loading sub module "exa"
[ 19.305] (II) LoadModule: "exa"
[ 19.305] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 19.317] (II) Module exa: vendor="X.Org Foundation"
[ 19.317] compiled for 1.10.2, module version = 2.5.0
[ 19.317] ABI class: X.Org Video Driver, version 10.0
[ 19.317] (II) Loading sub module "shadowfb"
[ 19.317] (II) LoadModule: "shadowfb"
[ 19.317] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 19.318] (II) Module shadowfb: vendor="X.Org Foundation"
[ 19.318] compiled for 1.10.2, module version = 1.0.0
[ 19.318] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.318] (--) Depth 24 pixmap format is 32 bpp
[ 19.337] (II) NOUVEAU(0): Opened GPU channel 2
[ 19.337] (II) NOUVEAU(0): [DRI2] Setup complete
[ 19.337] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 19.337] (II) NOUVEAU(0): GART: 512MiB available
[ 19.339] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 19.357] (II) EXA(0): Driver allocated offscreen pixmaps
[ 19.357] (II) EXA(0): Driver registered support for the following operations:
[ 19.357] (II) Solid
[ 19.357] (II) Copy
[ 19.357] (II) Composite (RENDER acceleration)
[ 19.357] (II) UploadToScreen
[ 19.357] (II) DownloadFromScreen
[ 19.357] (==) NOUVEAU(0): Backing store disabled
[ 19.357] (==) NOUVEAU(0): Silken mouse enabled
[ 19.358] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 19.358] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 19.358] (==) NOUVEAU(0): DPMS enabled
[ 19.358] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 19.358] (--) RandR disabled
[ 19.358] (II) Initializing built-in extension Generic Event Extension
[ 19.358] (II) Initializing built-in extension SHAPE
[ 19.358] (II) Initializing built-in extension MIT-SHM
[ 19.358] (II) Initializing built-in extension XInputExtension
[ 19.358] (II) Initializing built-in extension XTEST
[ 19.358] (II) Initializing built-in extension BIG-REQUESTS
[ 19.358] (II) Initializing built-in extension SYNC
[ 19.358] (II) Initializing built-in extension XKEYBOARD
[ 19.358] (II) Initializing built-in extension XC-MISC
[ 19.358] (II) Initializing built-in extension XINERAMA
[ 19.358] (II) Initializing built-in extension XFIXES
[ 19.358] (II) Initializing built-in extension RENDER
[ 19.358] (II) Initializing built-in extension RANDR
[ 19.358] (II) Initializing built-in extension COMPOSITE
[ 19.358] (II) Initializing built-in extension DAMAGE
[ 19.910] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19.910] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19.910] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 19.910] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 19.910] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19.910] (II) AIGLX: Loaded and initialized /usr/lib64/dri/nouveau_dri.so
[ 19.910] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 20.103] (II) NOUVEAU(0): NVEnterVT is called.
[ 20.149] (II) NOUVEAU(0): Setting screen physical size to 338 x 190
[ 20.150] resize called 1280 720
[ 20.608] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 20.608] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.608] (**) Power Button: Applying InputClass "Logitech Media Keyboard"
[ 20.608] (**) Power Button: Applying InputClass "keyboard-all"
[ 20.608] (II) LoadModule: "evdev"
[ 20.608] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.614] (II) Module evdev: vendor="X.Org Foundation"
[ 20.614] compiled for 1.10.2, module version = 2.6.0
[ 20.614] Module class: X.Org XInput Driver
[ 20.614] ABI class: X.Org XInput driver, version 12.2
[ 20.614] (II) Using input driver 'evdev' for 'Power Button'
[ 20.615] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.615] (**) Power Button: always reports core events
[ 20.615] (**) Power Button: Device: "/dev/input/event1"
[ 20.622] (--) Power Button: Found keys
[ 20.622] (II) Power Button: Configuring as keyboard
[ 20.622] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 20.622] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 20.622] (**) Option "xkb_rules" "evdev"
[ 20.622] (**) Option "xkb_model" "evdev"
[ 20.622] (**) Option "xkb_layout" "fr"
[ 20.622] (**) Option "xkb_variant" "latin9"
[ 20.622] (**) Option "xkb_options" "compose:menu"
[ 20.675] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 20.675] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.675] (**) Power Button: Applying InputClass "Logitech Media Keyboard"
[ 20.675] (**) Power Button: Applying InputClass "keyboard-all"
[ 20.675] (II) Using input driver 'evdev' for 'Power Button'
[ 20.675] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.675] (**) Power Button: always reports core events
[ 20.675] (**) Power Button: Device: "/dev/input/event0"
[ 20.686] (--) Power Button: Found keys
[ 20.686] (II) Power Button: Configuring as keyboard
[ 20.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 20.686] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 20.686] (**) Option "xkb_rules" "evdev"
[ 20.686] (**) Option "xkb_model" "evdev"
[ 20.686] (**) Option "xkb_layout" "fr"
[ 20.686] (**) Option "xkb_variant" "latin9"
[ 20.686] (**) Option "xkb_options" "compose:menu"
[ 20.690] (II) config/udev: Adding input device HID 0a5c:4502 (/dev/input/event3)
[ 20.690] (**) HID 0a5c:4502: Applying InputClass "evdev keyboard catchall"
[ 20.690] (**) HID 0a5c:4502: Applying InputClass "Logitech Media Keyboard"
[ 20.690] (**) HID 0a5c:4502: Applying InputClass "keyboard-all"
[ 20.690] (II) Using input driver 'evdev' for 'HID 0a5c:4502'
[ 20.690] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.690] (**) HID 0a5c:4502: always reports core events
[ 20.690] (**) HID 0a5c:4502: Device: "/dev/input/event3"
[ 20.698] (--) HID 0a5c:4502: Found keys
[ 20.698] (II) HID 0a5c:4502: Configuring as keyboard
[ 20.698] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input3/event3"
[ 20.698] (II) XINPUT: Adding extended input device "HID 0a5c:4502" (type: KEYBOARD)
[ 20.698] (**) Option "xkb_rules" "evdev"
[ 20.698] (**) Option "xkb_model" "evdev"
[ 20.698] (**) Option "xkb_layout" "fr"
[ 20.698] (**) Option "xkb_variant" "latin9"
[ 20.698] (**) Option "xkb_options" "compose:menu"
[ 20.699] (II) config/udev: Adding input device HID 0a5c:4503 (/dev/input/event4)
[ 20.699] (**) HID 0a5c:4503: Applying InputClass "evdev pointer catchall"
[ 20.699] (II) Using input driver 'evdev' for 'HID 0a5c:4503'
[ 20.699] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.699] (**) HID 0a5c:4503: always reports core events
[ 20.699] (**) HID 0a5c:4503: Device: "/dev/input/event4"
[ 20.706] (--) HID 0a5c:4503: Found 3 mouse buttons
[ 20.706] (--) HID 0a5c:4503: Found relative axes
[ 20.706] (--) HID 0a5c:4503: Found x and y relative axes
[ 20.706] (II) HID 0a5c:4503: Configuring as mouse
[ 20.706] (**) HID 0a5c:4503: YAxisMapping: buttons 4 and 5
[ 20.706] (**) HID 0a5c:4503: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.706] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input4/event4"
[ 20.706] (II) XINPUT: Adding extended input device "HID 0a5c:4503" (type: MOUSE)
[ 20.706] (II) HID 0a5c:4503: initialized for relative axes.
[ 20.706] (**) HID 0a5c:4503: (accel) keeping acceleration scheme 1
[ 20.706] (**) HID 0a5c:4503: (accel) acceleration profile 0
[ 20.706] (**) HID 0a5c:4503: (accel) acceleration factor: 2.000
[ 20.706] (**) HID 0a5c:4503: (accel) acceleration threshold: 4
[ 20.706] (II) config/udev: Adding input device HID 0a5c:4503 (/dev/input/mouse0)
[ 20.706] (II) No input driver/identifier specified (ignoring)
[ 20.712] (II) config/udev: Adding input device G15 Gaming Keyboard (/dev/input/event5)
[ 20.712] (**) G15 Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.712] (**) G15 Gaming Keyboard: Applying InputClass "Logitech Media Keyboard"
[ 20.712] (**) G15 Gaming Keyboard: Applying InputClass "keyboard-all"
[ 20.712] (II) Using input driver 'evdev' for 'G15 Gaming Keyboard'
[ 20.712] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.712] (**) G15 Gaming Keyboard: always reports core events
[ 20.712] (**) G15 Gaming Keyboard: Device: "/dev/input/event5"
[ 20.718] (--) G15 Gaming Keyboard: Found keys
[ 20.718] (II) G15 Gaming Keyboard: Configuring as keyboard
[ 20.718] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input5/event5"
[ 20.718] (II) XINPUT: Adding extended input device "G15 Gaming Keyboard" (type: KEYBOARD)
[ 20.718] (**) Option "xkb_rules" "evdev"
[ 20.718] (**) Option "xkb_model" "evdev"
[ 20.718] (**) Option "xkb_layout" "fr"
[ 20.718] (**) Option "xkb_variant" "latin9"
[ 20.718] (**) Option "xkb_options" "compose:menu"
[ 20.719] (II) config/udev: Adding input device G15 Gaming Keyboard (/dev/input/event6)
[ 20.719] (**) G15 Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.719] (**) G15 Gaming Keyboard: Applying InputClass "Logitech Media Keyboard"
[ 20.719] (**) G15 Gaming Keyboard: Applying InputClass "keyboard-all"
[ 20.719] (II) Using input driver 'evdev' for 'G15 Gaming Keyboard'
[ 20.719] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.719] (**) G15 Gaming Keyboard: always reports core events
[ 20.719] (**) G15 Gaming Keyboard: Device: "/dev/input/event6"
[ 20.726] (--) G15 Gaming Keyboard: Found keys
[ 20.726] (II) G15 Gaming Keyboard: Configuring as keyboard
[ 20.726] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input6/event6"
[ 20.726] (II) XINPUT: Adding extended input device "G15 Gaming Keyboard" (type: KEYBOARD)
[ 20.726] (**) Option "xkb_rules" "evdev"
[ 20.726] (**) Option "xkb_model" "evdev"
[ 20.726] (**) Option "xkb_layout" "fr"
[ 20.726] (**) Option "xkb_variant" "latin9"
[ 20.726] (**) Option "xkb_options" "compose:menu"
[ 20.727] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/event7)
[ 20.727] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 20.727] (II) Using input driver 'evdev' for 'Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)'
[ 20.727] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.727] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events
[ 20.727] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Device: "/dev/input/event7"
[ 20.738] (--) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found 9 mouse buttons
[ 20.738] (--) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 20.738] (--) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found relative axes
[ 20.738] (--) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 20.738] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 20.738] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.738] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input7/event7"
[ 20.738] (II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE)
[ 20.738] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 20.738] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 20.738] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse1)
[ 20.738] (II) No input driver/identifier specified (ignoring)
[ 20.739] (II) config/udev: Adding input device Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) (/dev/input/event2)
[ 20.739] (**) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Applying InputClass "evdev keyboard catchall"
[ 20.740] (**) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Applying InputClass "Logitech Media Keyboard"
[ 20.740] (**) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Applying InputClass "keyboard-all"
[ 20.740] (II) Using input driver 'evdev' for 'Media Center Ed. eHome Infrared Remote Transceiver (0471:0815)'
[ 20.740] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.740] (**) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): always reports core events
[ 20.740] (**) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Device: "/dev/input/event2"
[ 20.746] (--) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Found keys
[ 20.746] (II) Media Center Ed. eHome Infrared Remote Transceiver (0471:0815): Configuring as keyboard
[ 20.746] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0/input2/event2"
[ 20.746] (II) XINPUT: Adding extended input device "Media Center Ed. eHome Infrared Remote Transceiver (0471:0815)" (type: KEYBOARD)
[ 20.746] (**) Option "xkb_rules" "evdev"
[ 20.746] (**) Option "xkb_model" "evdev"
[ 20.746] (**) Option "xkb_layout" "fr"
[ 20.746] (**) Option "xkb_variant" "latin9"
[ 20.746] (**) Option "xkb_options" "compose:menu"
[ 20.756] (II) config/udev: Adding input device G15 Extra Keys (/dev/input/event8)
[ 20.756] (**) G15 Extra Keys: Applying InputClass "evdev keyboard catchall"
[ 20.756] (**) G15 Extra Keys: Applying InputClass "Logitech Media Keyboard"
[ 20.756] (**) G15 Extra Keys: Applying InputClass "keyboard-all"
[ 20.756] (II) Using input driver 'evdev' for 'G15 Extra Keys'
[ 20.756] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.756] (**) G15 Extra Keys: always reports core events
[ 20.756] (**) G15 Extra Keys: Device: "/dev/input/event8"
[ 20.762] (--) G15 Extra Keys: Found keys
[ 20.762] (II) G15 Extra Keys: Configuring as keyboard
[ 20.762] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event8"
[ 20.762] (II) XINPUT: Adding extended input device "G15 Extra Keys" (type: KEYBOARD)
[ 20.762] (**) Option "xkb_rules" "evdev"
[ 20.762] (**) Option "xkb_model" "evdev"
[ 20.762] (**) Option "xkb_layout" "fr"
[ 20.762] (**) Option "xkb_variant" "latin9"
[ 20.762] (**) Option "xkb_options" "compose:menu"
[ 34.963] (II) NOUVEAU(0): EDID vendor "BEK", prod id 12851
[ 34.963] (II) NOUVEAU(0): Using hsync ranges from config file
[ 34.963] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 34.963] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 34.963] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 34.963] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 46.669] (II) NOUVEAU(0): EDID vendor "BEK", prod id 12851
[ 46.669] (II) NOUVEAU(0): Using hsync ranges from config file
[ 46.669] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 46.669] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 46.669] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 46.669] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.39-gentoo-r1 (root@funky64) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #1 SMP PREEMPT Fri Jun 10 17:18:16 CEST 2011
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-gentoo-r1 root=/dev/sda1 ro rootfstype=ext4 log_buf_len=1M
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
BIOS-e820: 000000007f680000 - 000000007f698000 (ACPI data)
BIOS-e820: 000000007f698000 - 000000007f6dc000 (ACPI NVS)
BIOS-e820: 000000007f6dc000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: System manufacturer System Product Name/P6T, BIOS 1303 03/08/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7f680 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F700000 mask FFFF00000 uncachable
2 base 07F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
init_memory_mapping: 0000000000000000-000000007f680000
0000000000 - 007f600000 page 2M
007f600000 - 007f680000 page 4k
kernel direct mapping tables up to 7f680000 @ 7f67c000-7f680000
ACPI: RSDP 00000000000fad60 00024 (v02 ACPIAM)
ACPI: XSDT 000000007f680100 0005C (v01 030810 XSDT1026 20100308 MSFT 00000097)
ACPI: FACP 000000007f680290 000F4 (v03 030810 FACP1026 20100308 MSFT 00000097)
ACPI: DSDT 000000007f6804b0 0C466 (v01 A1146 A1146001 00000001 INTL 20060113)
ACPI: FACS 000000007f698000 00040
ACPI: APIC 000000007f680390 000D8 (v01 030810 APIC1026 20100308 MSFT 00000097)
ACPI: MCFG 000000007f680470 0003C (v01 030810 OEMMCFG 20100308 MSFT 00000097)
ACPI: OEMB 000000007f698040 00072 (v01 030810 OEMB1026 20100308 MSFT 00000097)
ACPI: HPET 000000007f68f4b0 00038 (v01 030810 OEMHPET 20100308 MSFT 00000097)
ACPI: OSFR 000000007f68f4f0 000B0 (v01 030810 OEMOSFR 20100308 MSFT 00000097)
ACPI: SSDT 000000007f69a330 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007f680000
NUMA: Using 63 for the hash shift.
Initmem setup node 0 0000000000000000-000000007f680000
NODE_DATA [000000007f677000 - 000000007f67bfff]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007ce00000-ffff88007e9fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0007f680
On node 0 totalpages: 521742
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 7079 pages used for memmap
DMA32 zone: 510681 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88007f400000 s73984 r8192 d24320 u131072
pcpu-alloc: s73984 r8192 d24320 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514602
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-gentoo-r1 root=/dev/sda1 ro rootfstype=ext4 log_buf_len=1M
log_buf_len: 1048576
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2049216k/2087424k available (3300k kernel code, 456k absent, 37752k reserved, 1930k data, 576k init)
Preemptable hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration failed
TSC: PIT calibration matches HPET. 1 loops
Detected 2672.820 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.64 BogoMIPS (lpj=2672820)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110316
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#7
smpboot cpu 7: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (42972.15 BogoMIPS).
PM: Registering ACPI NVS region at 7f698000 (278528 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007f6980c0 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 000000007f699cd0 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xf7fff000-0xf7fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07]
pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883]
pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807]
pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483]
pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1f.2: reg 24: [mem 0xf7ffc000-0xf7ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [10de:0641] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xcc00-0xcc7f]
pci 0000:02:00.0: reg 30: [mem 0xfbc80000-0xfbcfffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:05:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
pci 0000:05:00.0: reg 20: [mem 0xf6ef0000-0xf6efffff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:04:00.0: [197b:2363] type 0 class 0x000101
pci 0000:04:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff]
pci 0000:04:00.0: reg 30: [mem 0xfbde0000-0xfbdeffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: [197b:2363] type 0 class 0x000101
pci 0000:04:00.1: reg 10: [io 0xdc00-0xdc07]
pci 0000:04:00.1: reg 14: [io 0xd880-0xd883]
pci 0000:04:00.1: reg 18: [io 0xd800-0xd807]
pci 0000:04:00.1: reg 1c: [io 0xd480-0xd483]
pci 0000:04:00.1: reg 20: [io 0xd400-0xd40f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000007f680000 - 000000007fffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #5
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #4
Switched to NOHz mode on CPU #6
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #7
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x7ff00000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfbf00000-0xfbffffff]
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfec8a000-0xfec8afff]
pnp 00:01: [mem 0xfed10000-0xfed10fff]
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0290-0x029f]
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x004d]
pnp 00:07: [io 0x0050-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x0400-0x03ff disabled]
pnp 00:07: [io 0x0500-0x057f]
pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed40000-0xfed8ffff]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [mem 0xffa00000-0xffbfffff]
pnp 00:09: [mem 0xffe00000-0xffffffff]
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0a: [mem 0xffc00000-0xffdfffff]
system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xe0000000-0xefffffff]
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0x7fefffff]
pnp 00:0d: [mem 0xfed90000-0xffffffff]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x7fefffff] could not be reserved
system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.4: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.0: BAR 8: assigned [mem 0x80200000-0x805fffff]
pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x80200000-0x805fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbcfffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0x80200000-0x805fffff]
pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0x7ff00000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1307729773.687:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4002
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 66 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 67 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 67
ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 67
ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 67
ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 67
ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 67
ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 67
ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:04:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:04:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata9.00: HPA detected: current 398294975, native 398297088
ata9.00: ATA-7: Maxtor 6B200P0, BAH41BM0, max UDMA/133
ata9.00: 398294975 sectors, multi 0: LBA48
ata9.00: configured for UDMA/100
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 2672.727 MHz.
Switching to clocksource tsc
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: HPA detected: current 321670847, native 321672960
ata5.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
ata5.00: 321670847 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: Direct-Access ATA Maxtor 6B200P0 BAH4 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdc] 398294975 512-byte logical blocks: (203 GB/189 GiB)
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 576k freed
udevd[1833]: starting version 171
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 68 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc90010a60000, e0:cb:4e:81:62:dd, XID 1c4000c0 IRQ 68
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
[drm] Initialized drm 1.1.0 20060810
usb 5-1: new full speed USB device number 2 using uhci_hcd
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 69 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 3 ports detected
nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096080c1)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
hda_codec: ALC1200: BIOS auto-probing.
usb 6-2: new full speed USB device number 2 using uhci_hcd
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.94.4b.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02021342 00020030
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD20A
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD657
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE6A7
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE7F0
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEA5C
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEAC1
[drm] nouveau 0000:02:00.0: 0xEAC1: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: 1 available performance level(s)
[drm] nouveau 0000:02:00.0: 3: memory 333MHz core 550MHz shader 1375MHz fanspeed 100%
[drm] nouveau 0000:02:00.0: c: memory 399MHz core 400MHz shader 800MHz
[TTM] Zone kernel: Available graphics memory: 1024896 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
usb 7-1: new full speed USB device number 2 using uhci_hcd
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
usb 5-1.1: new full speed USB device number 3 using uhci_hcd
lirc_dev: IR Remote Control driver registered, major 251
IR LIRC bridge handler initialized
IR keymap rc-rc6-mce not found
Registered IR keymap rc-empty
input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0/input2
rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/rc/rc0
rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
mceusb 7-1:1.0: Registered Philips eHome Infrared Transceiver on usb7:2
usbcore: registered new interface driver mceusb
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input3
generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.2-1.1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 5-1.2: new full speed USB device number 4 using uhci_hcd
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input4
generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.2-1.2/input0
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm] nouveau 0000:02:00.0: allocated 1680x1050 fb: 0x40000000, bo ffff880078fc6800
fbcon: nouveaufb (fb0) is primary device
usb 5-1.3: new full speed USB device number 5 using uhci_hcd
Console: switching to colour frame buffer device 160x45
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usb 6-2.1: new low speed USB device number 3 using uhci_hcd
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
usb 5-1.1: input irq status -75 received
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input5
generic-usb 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input6
generic-usb 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input1
usb 6-2.3: new low speed USB device number 4 using uhci_hcd
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input7
generic-usb 0003:045E:0039.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2.3/input0
usb 6-2.4: new full speed USB device number 5 using uhci_hcd
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.4/6-2.4:1.0/input/input8
generic-usb 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.0-2.4/input0
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with writeback data mode
input: G15 Extra Keys as /devices/virtual/input/input9
Adding 971928k swap on /dev/sda2. Priority:-1 extents:1 across:971928k
r8169 0000:05:00.0: eth0: link down
r8169 0000:05:00.0: eth0: link down
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Registering the id_resolver key type
r8169 0000:05:00.0: eth0: link up
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
coretemp coretemp.0: TjMax is 97 C.
coretemp coretemp.1: TjMax is 97 C.
coretemp coretemp.2: TjMax is 97 C.
coretemp coretemp.3: TjMax is 97 C.
w83627ehf: Found W83667HG chip at 0x290
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
<3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1.
00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
Subsystem: ASUSTeK Computer Inc. Device 836b
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Kernel driver in use: pcieport
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-fbcfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 75.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Kernel driver in use: pcieport
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Kernel driver in use: pcieport
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b880 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at bc00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7fff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
Subsystem: ASUSTeK Computer Inc. Device 8357
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 69
Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 40a1
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80200000-805fffff
Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00000 Data: 4049
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8357
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000f6e00000-00000000f6efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00000 Data: 4051
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8357
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=03 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00000 Data: 4059
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8357
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=05 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b080 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b400 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b480 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 82d4
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 67
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=32]
Region 5: Memory at f7ffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Address: fee00000 Data: 4069
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7ffd000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9400 GT] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
Expansion ROM at fbc80000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nouveau
Kernel modules: nouveau
04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 824f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fbdfe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fbde0000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: ahci
04:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 824f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_jmicron
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 82c6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 68
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fbeff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f6ef0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 4079
Capabilities: [70] Express (v1) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 03-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192
DVI-I-1 connected 1680x1050+0+0 (0x63) normal (normal left inverted right x axis y axis) 473mm x 296mm
Identifier: 0x61
Timestamp: 301673
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff00047274ad70096064
2e100103e82f1e782ec585a459499a24
125054bfef0081808140714f9500950f
b30081c08bc021399030621a274068b0
3600d9281100001c000000fd00384c1e
5210000a202020202020000000fc0041
63657220414c32323136570a000000ff
004c373430393034363338323020002f
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-D
supported: Unknown DVI-D DVI-A
1680x1050 (0x63) 146.2MHz -HSync +VSync *current +preferred
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz
v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz
1280x1024 (0x64) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x65) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x66) 136.8MHz -HSync +VSync
h: width 1440 start 1536 end 1688 total 1936 skew 0 clock 70.6KHz
v: height 900 start 903 end 909 total 942 clock 75.0Hz
1440x900 (0x67) 106.5MHz -HSync +VSync
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
1280x960 (0x68) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1360x768 (0x69) 84.8MHz -HSync +VSync
h: width 1366 start 1431 end 1567 total 1776 skew 0 clock 47.7KHz
v: height 768 start 771 end 781 total 798 clock 59.8Hz
1152x864 (0x6a) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1280x720 (0x6b) 74.4MHz -HSync +VSync
h: width 1280 start 1336 end 1472 total 1664 skew 0 clock 44.7KHz
v: height 720 start 721 end 724 total 746 clock 60.0Hz
1024x768 (0x6c) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x6d) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x6e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x6f) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x70) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x71) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x72) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x73) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x74) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x75) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x76) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x77) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x78) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
DVI-I-2 connected 1280x720+1680+0 (0x79) normal (normal left inverted right x axis y axis) 708mm x 398mm
Identifier: 0x62
Timestamp: 301673
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff0008ab333261b90b03
310f01030e4628782a3f44a654469924
13484bbfee0001010101010101010101
010101010101011d00bc52d01e20b828
5540c48e2100001e000000fd00384c1f
3d08000a202020202020000000ff0035
32353030303030300a202020000000fc
0042454b4f2d564a415a310a2020006d
dithering: Off
supported: Off On Automatic
scaling mode: Full
supported: None Full Center Full aspect
select subconnector: Automatic
supported: Automatic DVI-D DVI-A
subconnector: DVI-A
supported: Unknown DVI-D DVI-A
1280x720 (0x79) 74.2MHz +HSync +VSync *current +preferred
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
1024x768 (0x6c) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x6d) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x6e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x6f) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x70) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x71) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x72) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x73) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x74) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x75) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x76) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x77) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x78) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
