On Wednesday 05 October 2016 06:35 PM, Bartosz Golaszewski wrote:
> From: Karl Beldan <kbeldan@xxxxxxxxxxxx>
>
> Add pins used by the LCD controller and a disabled LCDC node to be
> reused in device trees including da850.dtsi.
>
> Signed-off-by: Karl Beldan <kbeldan@xxxxxxxxxxxx>
> [Bartosz:
> - added the commit description
> - changed the dt node name to a generic one
> - added a da850-specific compatible string
> - removed the tilcdc,panel node
> - moved the pins definitions to da850.dtsi as suggested by
> Sekhar Nori (was in: da850-lcdk.dts)]
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/da850.dtsi | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index f79e1b9..32908ae 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -399,6 +420,14 @@
> <&edma0 0 1>;
> dma-names = "tx", "rx";
> };
> +
> + display: display@213000 {
> + compatible = "ti,am33xx-tilcdc", "ti,da850-tilcdc";
This should instead be:
compatible = "ti,da850-tilcdc", "ti,am33xx-tilcdc";
as the closest match should appear first in the list.
> + reg = <0x213000 0x1000>;
> + interrupt-parent = <&intc>
No need of specifying the interrupt-parent as it is assumed to be that
from the parent node (soc) if left unspecified.
I made these two fixes locally and pushed the two patches in this series
to v4.10/dt branch of my tree (for URL see MAINTAINERS). Can you take a
look and make sure I did not mess anything up?
Regards,
Sekhar
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
