Re: [PATCH] drm/msm/mdp5: handle non-fullscreen base plane case

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Oct 15, 2016 at 5:39 AM, Archit Taneja <architt@xxxxxxxxxxxxxx> wrote:
>
> On 10/13/2016 10:18 PM, Rob Clark wrote:
>>
>> If the bottom-most layer is not fullscreen, we need to use the BASE
>> mixer stage for solid fill (ie. MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT).  The
>> blend_setup() code pretty much handled this already, we just had to
>> figure this out in _atomic_check() and assign the stages appropriately.
>>
>> Signed-off-by: Rob Clark <robdclark@xxxxxxxxx>
>> ---
>> TODO mdp4 might need similar treatment?
>>
>>  drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 44
>> ++++++++++++++++++++------------
>>  1 file changed, 27 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
>> b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
>> index fa2be7c..e42f62d 100644
>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
>> @@ -223,11 +223,6 @@ static void blend_setup(struct drm_crtc *crtc)
>>                 plane_cnt++;
>>         }
>>
>> -       /*
>> -       * If there is no base layer, enable border color.
>> -       * Although it's not possbile in current blend logic,
>> -       * put it here as a reminder.
>> -       */
>>         if (!pstates[STAGE_BASE] && plane_cnt) {
>>                 ctl_blend_flags |= MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT;
>>                 DBG("Border Color is enabled");
>> @@ -365,6 +360,15 @@ static int pstate_cmp(const void *a, const void *b)
>>         return pa->state->zpos - pb->state->zpos;
>>  }
>>
>> +/* is there a helper for this? */
>> +static bool is_fullscreen(struct drm_crtc_state *cstate,
>> +               struct drm_plane_state *pstate)
>> +{
>> +       return (pstate->crtc_x == 0) && (pstate->crtc_y == 0) &&
>> +               (pstate->crtc_w == cstate->mode.hdisplay) &&
>> +               (pstate->crtc_h == cstate->mode.vdisplay);
>> +}
>> +
>>  static int mdp5_crtc_atomic_check(struct drm_crtc *crtc,
>>                 struct drm_crtc_state *state)
>>  {
>> @@ -375,21 +379,11 @@ static int mdp5_crtc_atomic_check(struct drm_crtc
>> *crtc,
>>         struct plane_state pstates[STAGE_MAX + 1];
>>         const struct mdp5_cfg_hw *hw_cfg;
>>         const struct drm_plane_state *pstate;
>> -       int cnt = 0, i;
>> +       int cnt = 0, base = 0, i;
>>
>>         DBG("%s: check", mdp5_crtc->name);
>>
>> -       /* verify that there are not too many planes attached to crtc
>> -        * and that we don't have conflicting mixer stages:
>> -        */
>> -       hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg);
>>         drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) {
>> -               if (cnt >= (hw_cfg->lm.nb_stages)) {
>> -                       dev_err(dev->dev, "too many planes!\n");
>> -                       return -EINVAL;
>> -               }
>> -
>> -
>>                 pstates[cnt].plane = plane;
>>                 pstates[cnt].state = to_mdp5_plane_state(pstate);
>>
>> @@ -399,8 +393,24 @@ static int mdp5_crtc_atomic_check(struct drm_crtc
>> *crtc,
>>         /* assign a stage based on sorted zpos property */
>>         sort(pstates, cnt, sizeof(pstates[0]), pstate_cmp, NULL);
>>
>> +       /* if the bottom-most layer is not fullscreen, we need to use
>> +        * it for solid-color:
>> +        */
>> +       if (!is_fullscreen(state, &pstates[0].state->base))
>> +               base++;
>> +
>
>
> I get a crash here when fbcon is enabled and there are no connectors
> connected. We're trying to refer pstates[0] when there is no plane
> connected to the crtc. I guess we could bail out much earlier if cnt
> is 0.

yeah, I hit that last night with no fbcon and killing the UI.. I've
already fixed it up locally with an 'if (pstates[0].state &&
!is_fullscreen())'

BR,
-R

> Archit
>
>> +       /* verify that there are not too many planes attached to crtc
>> +        * and that we don't have conflicting mixer stages:
>> +        */
>> +       hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg);
>> +
>> +       if ((cnt + base) >= hw_cfg->lm.nb_stages) {
>> +               dev_err(dev->dev, "too many planes!\n");
>> +               return -EINVAL;
>> +       }
>> +
>>         for (i = 0; i < cnt; i++) {
>> -               pstates[i].state->stage = STAGE_BASE + i;
>> +               pstates[i].state->stage = STAGE_BASE + i + base;
>>                 DBG("%s: assign pipe %s on stage=%d", mdp5_crtc->name,
>>
>> pipe2name(mdp5_plane_pipe(pstates[i].plane)),
>>                                 pstates[i].state->stage);
>>
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux