SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0. It is controlled
via I2C bus.
Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/video/bridge/sil-sii8620.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt
diff --git a/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt
new file mode 100644
index 0000000..9409d9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt
@@ -0,0 +1,33 @@
+Silicon Image SiI8620 HDMI/MHL bridge bindings
+
+Required properties:
+ - compatible: "sil,sii8620"
+ - reg: i2c address of the bridge
+ - cvcc10-supply: Digital Core Supply Voltage (1.0V)
+ - iovcc18-supply: I/O Supply Voltage (1.8V)
+ - interrupts, interrupt-parent: interrupt specifier of INT pin
+ - reset-gpios: gpio specifier of RESET pin
+ - clocks, clock-names: specification and name of "xtal" clock
+ - video interfaces: Device node can contain video interface port
+ node for HDMI encoder according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+ sii8620@39 {
+ reg = <0x39>;
+ compatible = "sil,sii8620";
+ cvcc10-supply = <&ldo36_reg>;
+ iovcc18-supply = <&ldo34_reg>;
+ interrupt-parent = <&gpf0>;
+ interrupts = <2 0>;
+ reset-gpio = <&gpv7 0 0>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "xtal";
+
+ port {
+ mhl_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_mhl>;
+ };
+ };
+ };
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
