On Thu, Oct 6, 2016 at 1:27 PM, Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > Hello, > > On Thursday 06 Oct 2016 17:09:57 Archit Taneja wrote: >> On 10/06/2016 12:51 PM, Maxime Ripard wrote: >> > On Mon, Oct 03, 2016 at 04:40:57PM +0530, Archit Taneja wrote: >> >> On 09/30/2016 08:07 PM, Maxime Ripard wrote: >> >>> Some boards have an entirely passive RGB to VGA bridge, based on either >> >>> DACs or resistor ladders. >> >>> >> >>> Those might or might not have an i2c bus routed to the VGA connector in >> >>> order to access the screen EDIDs. >> >>> >> >>> Add a bridge that doesn't do anything but expose the modes available on >> >>> the screen, either based on the EDIDs if available, or based on the XGA >> >>> standards. >> >>> >> >>> Acked-by: Rob Herring <robh@xxxxxxxxxx> >> >>> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> >> >>> --- >> >>> .../bindings/display/bridge/rgb-to-vga-bridge.txt | 48 +++++ >> >>> drivers/gpu/drm/bridge/Kconfig | 7 + >> >>> drivers/gpu/drm/bridge/Makefile | 1 + >> >>> drivers/gpu/drm/bridge/rgb-to-vga.c | 229 +++++++++++++++ >> >>> 4 files changed, 285 insertions(+) >> >>> create mode 100644 >> >>> Documentation/devicetree/bindings/display/bridge/rgb-to-vga-bridge.txt >> >>> create mode 100644 drivers/gpu/drm/bridge/rgb-to-vga.c >> >>> >> >>> diff --git >> >>> a/Documentation/devicetree/bindings/display/bridge/rgb-to-vga-bridge.tx >> >>> t >> >>> b/Documentation/devicetree/bindings/display/bridge/rgb-to-vga-bridge.tx >> >>> t new file mode 100644 >> >>> index 000000000000..a8375bc1f9cb >> >>> --- /dev/null >> >>> +++ >> >>> b/Documentation/devicetree/bindings/display/bridge/rgb-to-vga-bridge.tx >> >>> t @@ -0,0 +1,48 @@ >> >>> +Dumb RGB to VGA bridge >> >>> +---------------------- >> >>> + >> >>> +This binding is aimed for dumb RGB to VGA bridges that do not require >> >>> +any configuration. >> >>> + >> >>> +Required properties: >> >>> + >> >>> +- compatible: Must be "rgb-to-vga-bridge" >> >> >> >> I'd talked to Laurent on IRC if he's okay with this. And I guess you to >> >> had discussed it during XDC too. He's suggested that it'd be better to >> >> have the compatible string as "simple-vga-dac". >> > >> > I just wished this bikeshedding had taken place publicly and be >> > actually part of that discussion, but yeah, ok. >> >> Sorry about that. I'd pinged him for an Ack, the discussion went >> more than that :) >> >> >> Some of the reasons behind having this: >> >> >> >> - We don't need to specify "rgb" in the compatible string since most >> >> simple VGA DACs can only work with an RGB input. >> > >> > Ok. >> > >> >> - Also, with "dac" specified in the string, we don't need to >> >> specifically mention "bridge" in the string. Also, bridge is a drm >> >> specific term. >> >> >> >> - "simple" is considered because it's an unconfigurable bridge, and it >> >> might be misleading for other VGA DACs to not use "vga-dac". >> > >> > All those "simple" bindings are just the biggest lie we ever >> > told. It's simple when you introduce it, and then grows into something >> > much more complicated than a non-simple implementation. >> >> "simple" here is supposed to mean that it's an unconfigurable RGB to >> VGA DAC. This isn't supposed to follow the simple-panel model, where >> you add the "simple-panel" string in the compatible node, along with >> you chip specific compatible string. > > I agree with Maxime, I don't like the word "simple". My preference would be > "vga-dac" for a lack of a better qualifier than "simple" to describe the fact > that the device requires no configuration. My only concern with "vga-dac" is > that we would restrict usage of that compatible string for a subset of VGA > DACs, with more complex devices not being compatible with "vga-dac" even > though they are VGA DACs. That's a problem I can live with though. While we're bikeshedding (feel free to ignore my input on this), I think Maxime's initial "dumb" qualifier was better than "simple". I think "passive" also gets the point across better than "simple", which we've already established as something else in drm. Now that I've gotten that out of the way, this patch looks good to me regardless of the name. Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx> Sean > >> In other words, this driver shouldn't be touched again in the future :) >> If someone wants to write a RGB to VGA driver which is even >> slightly configurable, they'll need to write a new bridge driver. > > I'm sure that won't be true. I can certainly foresee the addition of > regulators support for instance. It's unfortunately never black and white. > >> >> What do you think about this? If you think it's good, would it be >> >> possible for you to change this? I guess it's okay for the rest of >> >> the patch to stay the same. >> > >> > I'll update and respin the serie. > > -- > Regards, > > Laurent Pinchart > > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
