From: Junzhi Zhao <junzhi.zhao@xxxxxxxxxxxx> Currently, the code sets the "pll" to the desired multiple of the pixel clock manully(4*3m 8*3,etc). The valid range of the pll is 1G-2G, however, when the pixel clock is bigger than 167MHz, the "pll" will be set to a invalid value( > 2G), then the "pll" will be 2GHz, thus the pixel clock will be in correct. Change the factor to make the "pll" be set in the (1G, 2G) range. Signed-off-by: Junzhi Zhao <junzhi.zhao@xxxxxxxxxxxx> Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx> --- drivers/gpu/drm/mediatek/mtk_dpi.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c index 0186e50..90fb831 100644 --- a/drivers/gpu/drm/mediatek/mtk_dpi.c +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c @@ -432,11 +432,16 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, unsigned long pll_rate; unsigned int factor; + /* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */ pix_rate = 1000UL * mode->clock; - if (mode->clock <= 74000) + if (mode->clock <= 27000) + factor = 16 * 3; + else if (mode->clock <= 84000) factor = 8 * 3; - else + else if (mode->clock <= 167000) factor = 4 * 3; + else + factor = 2 * 3; pll_rate = pix_rate * factor; dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n", -- 1.7.9.5 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
