Hi Laurent,
On Mon, Sep 19, 2016 at 8:27 PM, Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
> The vblank interrupt is disabled after one occurrence, preventing the
> atomic update event from being processed twice. However, this also
> prevents the software frame counter from being updated correctly that
> would require vblank interrupts to be kept enabled while the CRTC is
> active.
>
> In preparation for vblank interrupt fixes, make sure that the atomic
> update event will be processed once only when the vblank interrupt will
> be kept enabled.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/omapdrm/omap_crtc.c | 22 +++++++++++++++++++---
> 1 file changed, 19 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c
> index a0c26592fc69..8fef6558197b 100644
> --- a/drivers/gpu/drm/omapdrm/omap_crtc.c
> +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
> @@ -43,6 +43,7 @@ struct omap_crtc {
> bool enabled;
> bool pending;
> wait_queue_head_t pending_wait;
> + struct drm_pending_vblank_event *event;
> };
>
> /* -----------------------------------------------------------------------------
> @@ -260,11 +261,15 @@ static const struct dss_mgr_ops mgr_ops = {
>
> static void omap_crtc_complete_page_flip(struct drm_crtc *crtc)
> {
> + struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> struct drm_pending_vblank_event *event;
> struct drm_device *dev = crtc->dev;
> unsigned long flags;
>
> - event = crtc->state->event;
> + spin_lock_irqsave(&dev->event_lock, flags);
> + event = omap_crtc->event;
> + omap_crtc->event = NULL;
> + spin_unlock_irqrestore(&dev->event_lock, flags);
Perhaps just hold the lock until after drm_crtc_send_vblank_event(crtc, event)?
>
> if (!event)
> return;
> @@ -384,12 +389,23 @@ static int omap_crtc_atomic_check(struct drm_crtc *crtc,
> }
>
> static void omap_crtc_atomic_begin(struct drm_crtc *crtc,
> - struct drm_crtc_state *old_crtc_state)
> + struct drm_crtc_state *old_crtc_state)
> {
> + struct drm_pending_vblank_event *event = crtc->state->event;
> + struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> + unsigned long flags;
> +
> + if (event) {
> + WARN_ON(drm_crtc_vblank_get(crtc) != 0);
> +
> + spin_lock_irqsave(&crtc->dev->event_lock, flags);
> + omap_crtc->event = event;
> + spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
> + }
AFAICT, the only reason to use the spin_lock_irqsave here is if there
is a possibility that the vblank irq can run in parallel to
atomic_begin().
If this is the case, then setting omap_crtc->event here in
atomic_begin() may not work exactly as you wish.
It sets up a race: the vblank irq may call
omap_crtc_complete_page_flip and send the event between here and when
the "GO" bit is set in atomic_flush(), and thus, it may send the event
too early, on the wrong vblank.
By the way, it looks like there is the same race, but just much
shorter, with the "omap_crtc->pending" flag. Since it is set in
atomic_flush() before hitting the go bit - there is a tiny window
where an irq could arrive and see pending = true for the wrong vblank.
I'm not familiar enough with this driver, however, to tell if it is
really possible to get an irq here or not.
-Dan
> }
>
> static void omap_crtc_atomic_flush(struct drm_crtc *crtc,
> - struct drm_crtc_state *old_crtc_state)
> + struct drm_crtc_state *old_crtc_state)
> {
> struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
>
> --
> Regards,
>
> Laurent Pinchart
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
