There's no point in enabling PSR when the panel doesn't support it. This also avoids a problem when PSR gets enabled when a CRTC is being disabled, because sometimes in that situation the DSP_HOLD_VALID_INTR interrupt on which we wait will never arrive. This was observed on RK3288 with a panel without PSR (veyron-jaq Chromebook). It's very easy to reproduce by running the kms_rmfb test in IGT a few times. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx> Cc: Sean Paul <seanpaul@xxxxxxxxxxxx> Cc: Yakir Yang <ykk@xxxxxxxxxxxxxx> Cc: Archit Taneja <architt@xxxxxxxxxxxxxx> --- drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index e83be157cc2a..8548e8271639 100644 --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c @@ -85,6 +85,9 @@ static void analogix_dp_psr_set(struct drm_encoder *encoder, bool enabled) struct rockchip_dp_device *dp = to_dp(encoder); unsigned long flags; + if (!analogix_dp_psr_supported(dp->dev)) + return; + dev_dbg(dp->dev, "%s PSR...\n", enabled ? "Entry" : "Exit"); spin_lock_irqsave(&dp->psr_lock, flags); -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
