Maintain a table of regulator names expect by ADV7511 and ADV7533.
Use regulator_bulk_* api to configure these.
Initialize and enable the regulators during probe itself. Controlling
these dynamically is left for later.
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
v2:
- Use regulator_bulk_* API to configure regulators as suggested by Laurent.
- Set up regulators for ADV7511 too.
drivers/gpu/drm/bridge/adv7511/adv7511.h | 4 ++
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 85 +++++++++++++++++++++++++---
2 files changed, 80 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index 161c923..83ebdaa 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -12,6 +12,7 @@
#include <linux/hdmi.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_mipi_dsi.h>
@@ -327,6 +328,9 @@ struct adv7511 {
struct gpio_desc *gpio_pd;
+ struct regulator_bulk_data *supplies;
+ int num_supplies;
+
/* ADV7533 DSI RX related params */
struct device_node *host_node;
struct mipi_dsi_device *dsi;
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 8ed3906..f7e79ed 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -839,6 +839,57 @@ static struct drm_bridge_funcs adv7511_bridge_funcs = {
* Probe & remove
*/
+static const char * const adv7511_supply_names[] = {
+ "avdd",
+ "dvdd",
+ "pvdd",
+ "v3p3",
+ "bgvdd",
+};
+
+static const char * const adv7533_supply_names[] = {
+ "avdd",
+ "dvdd",
+ "pvdd",
+ "a2vdd",
+ "v3p3",
+ "v1p2",
+};
+
+static int adv7511_init_regulators(struct adv7511 *adv)
+{
+ struct device *dev = &adv->i2c_main->dev;
+ const char * const *supply_names;
+ int i, ret;
+
+ if (adv->type == ADV7511) {
+ supply_names = adv7511_supply_names;
+ adv->num_supplies = ARRAY_SIZE(adv7511_supply_names);
+ } else {
+ supply_names = adv7533_supply_names;
+ adv->num_supplies = ARRAY_SIZE(adv7533_supply_names);
+ }
+
+ adv->supplies = devm_kcalloc(dev, adv->num_supplies,
+ sizeof(*adv->supplies), GFP_KERNEL);
+ if (!adv->supplies)
+ return -ENOMEM;
+
+ for (i = 0; i < adv->num_supplies; i++)
+ adv->supplies[i].supply = supply_names[i];
+
+ ret = devm_regulator_bulk_get(dev, adv->num_supplies, adv->supplies);
+ if (ret)
+ return ret;
+
+ return regulator_bulk_enable(adv->num_supplies, adv->supplies);
+}
+
+static void adv7511_uninit_regulators(struct adv7511 *adv)
+{
+ regulator_bulk_disable(adv->num_supplies, adv->supplies);
+}
+
static int adv7511_parse_dt(struct device_node *np,
struct adv7511_link_config *config)
{
@@ -939,6 +990,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
if (!adv7511)
return -ENOMEM;
+ adv7511->i2c_main = i2c;
adv7511->powered = false;
adv7511->status = connector_status_disconnected;
@@ -956,13 +1008,21 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
if (ret)
return ret;
+ ret = adv7511_init_regulators(adv7511);
+ if (ret) {
+ dev_err(dev, "failed to init regulators\n");
+ return ret;
+ }
+
/*
* The power down GPIO is optional. If present, toggle it from active to
* inactive to wake up the encoder.
*/
adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
- if (IS_ERR(adv7511->gpio_pd))
- return PTR_ERR(adv7511->gpio_pd);
+ if (IS_ERR(adv7511->gpio_pd)) {
+ ret = PTR_ERR(adv7511->gpio_pd);
+ goto uninit_regulators;
+ }
if (adv7511->gpio_pd) {
mdelay(5);
@@ -970,12 +1030,14 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
}
adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
- if (IS_ERR(adv7511->regmap))
- return PTR_ERR(adv7511->regmap);
+ if (IS_ERR(adv7511->regmap)) {
+ ret = PTR_ERR(adv7511->regmap);
+ goto uninit_regulators;
+ }
ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
if (ret)
- return ret;
+ goto uninit_regulators;
dev_dbg(dev, "Rev. %d\n", val);
if (adv7511->type == ADV7511)
@@ -985,7 +1047,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
else
ret = adv7533_patch_registers(adv7511);
if (ret)
- return ret;
+ goto uninit_regulators;
regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
@@ -995,10 +1057,11 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
adv7511_packet_disable(adv7511, 0xffff);
- adv7511->i2c_main = i2c;
adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
- if (!adv7511->i2c_edid)
- return -ENOMEM;
+ if (!adv7511->i2c_edid) {
+ ret = -ENOMEM;
+ goto uninit_regulators;
+ }
if (adv7511->type == ADV7533) {
ret = adv7533_init_cec(adv7511);
@@ -1043,6 +1106,8 @@ err_unregister_cec:
adv7533_uninit_cec(adv7511);
err_i2c_unregister_edid:
i2c_unregister_device(adv7511->i2c_edid);
+uninit_regulators:
+ adv7511_uninit_regulators(adv7511);
return ret;
}
@@ -1056,6 +1121,8 @@ static int adv7511_remove(struct i2c_client *i2c)
adv7533_uninit_cec(adv7511);
}
+ adv7511_uninit_regulators(adv7511);
+
drm_bridge_remove(&adv7511->bridge);
i2c_unregister_device(adv7511->i2c_edid);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
