I haven't found any method for getting the length of a response, so this just uses the requested rx_len Signed-off-by: John Keeping <john@xxxxxxxxxxxx> --- drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 54 ++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index d0b2f6e9517d..6dc43c024bca 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c @@ -676,6 +676,54 @@ static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi, return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val); } +static int dw_mipi_dsi_dcs_read(struct dw_mipi_dsi *dsi, + const struct mipi_dsi_msg *msg) +{ + const u8 *tx_buf = msg->tx_buf; + u8 *rx_buf = msg->rx_buf; + size_t i; + int ret, val; + + dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA); + dsi_write(dsi, DSI_GEN_HDR, GEN_HDATA(tx_buf[0]) | GEN_HTYPE(msg->type)); + + ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS, + val, !(val & GEN_RD_CMD_BUSY), 1000, + CMD_PKT_STATUS_TIMEOUT_US); + if (ret < 0) { + dev_err(dsi->dev, "failed to read command response\n"); + return ret; + } + + for (i = 0; i < msg->rx_len;) { + u32 pld = dsi_read(dsi, DSI_GEN_PLD_DATA); + while (i < msg->rx_len) { + rx_buf[i] = pld & 0xff; + pld >>= 8; + i++; + } + } + + return msg->rx_len; +} + +static int dw_mipi_dsi_set_max_return_packet_size(struct dw_mipi_dsi *dsi, + size_t len) +{ + u8 val[] = { len & 0xff, (len >> 8) & 0xff }; + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, + .tx_buf = val, + .tx_len = 2, + }; + + if (len > 0xffff) + return -EINVAL; + + return dw_mipi_dsi_dcs_short_write(dsi, &msg); +} + static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host, const struct mipi_dsi_msg *msg) { @@ -693,6 +741,12 @@ static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host, case MIPI_DSI_DCS_LONG_WRITE: ret = dw_mipi_dsi_dcs_long_write(dsi, msg); break; + case MIPI_DSI_DCS_READ: + ret = dw_mipi_dsi_set_max_return_packet_size(dsi, msg->rx_len); + if (ret < 0) + return ret; + ret = dw_mipi_dsi_dcs_read(dsi, msg); + break; default: dev_err(dsi->dev, "unsupported message type 0x%02x\n", msg->type); -- 2.10.0.278.g4f427b1.dirty _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel