Re: [PATCH v4] dt-bindings: Add jdi lt070me05000 panel bindings

[Vinay Simha <simhavcs@xxxxxxxxx>]

Hi Tierry,

Could you please review the patch and integrate?

On Thu, Sep 8, 2016 at 10:44 AM, Vinay Simha BN <simhavcs@xxxxxxxxx> wrote:

Add documentation for lt070me05000 panel

Cc: Archit Taneja <archit.taneja@xxxxxxxxx>
Cc: John Stultz <john.stultz@xxxxxxxxxx>
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
Signed-off-by: Vinay Simha BN <simhavcs@xxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>

---
v2:
 * incorporated rob herring and thierry reviews
   gpio to gpios, gpio to regulator using fixed regulators
   and pwm backlight is removed, since it is controlled by
   dcs commands

v3:
 * incorporated thierry reviews
   - Added gpio polarity details for reset-gpios
   - proper naming conventions and sequence wrt panel datasheet
     (vddp-supply, iovcc-supply,
      enable-gpios, reset-gpios, dcdc-en-gpios)
v4:
 * pinctrl-names, pinctrl-0 removed, not required for
   reset-gpios
---
 .../bindings/display/panel/jdi,lt070me05000.txt    | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt

diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 0000000..4989c91d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,31 @@
+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- vddp-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply (3-5V)
+- iovcc-supply: phandle of the regulator that provides the supply voltage
+  IOVCC , power supply for LCM (1.8V)
+- enable-gpios: phandle of gpio for enable line
+  LED_EN, LED backlight enable, High active
+- reset-gpios: phandle of gpio for reset line
+  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+  XRES, Reset, Low active
+- dcdc-en-gpios: phandle of the gpio for power ic line
+  Power IC supply enable, High active
+
+Example:
+
+       dsi0: qcom,mdss_dsi@4700000 {
+               panel@0 {
+                       compatible = "jdi,lt070me05000";
+                       reg = <0>;
+
+                       vddp-supply = <&pm8921_l17>;
+                       iovcc-supply = <&pm8921_lvs7>;
+
+                       enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+                       reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+                       dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+               };
+       };
--
2.1.2

--

regards,
vinaysimha

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel