Re: [PATCH v4 3/8] drm/tilcdc: Add blue-and-red-crossed devicetree property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 01, 2016 at 12:09:07PM +0300, Jyri Sarha wrote:
> Add "blue-and-red-wiring"-device tree property and update devicetree
> binding document.
> 
> The red and blue components are reversed between 24 and 16 bit modes
> on am335x LCDC output pins. To get 24 RGB format the red and blue
> wires has to be crossed and this in turn causes 16 colors output to be
> in BGR format. With straight wiring the 16 color is RGB and 24 bit is
> BGR.
> 
> The new property describes whether the red and blue wires are crossed
> or not. If the property is not present or its value is not recognized
> the legacy mode is assumed. The legacy configuration supports RGB565,
> RGB888 and XRGB8888 formats. However, depending on wiring, the red and
> blue colors are swapped in either 16 or 24-bit color modes.
> 
> For more details see section 3.1.1 in AM335x Silicon Errata:
> http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
> 
> Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
> ---
>  .../devicetree/bindings/display/tilcdc/tilcdc.txt  | 22 ++++++++++++
>  drivers/gpu/drm/tilcdc/tilcdc_drv.c                | 41 ++++++++++++++++++++++
>  drivers/gpu/drm/tilcdc/tilcdc_drv.h                |  4 +++
>  drivers/gpu/drm/tilcdc/tilcdc_plane.c              |  9 ++---
>  4 files changed, 70 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
> index 6efa4c5..a5007aa 100644
> --- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
> +++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
> @@ -17,6 +17,18 @@ Optional properties:
>     the lcd controller.
>   - max-pixelclock: The maximum pixel clock that can be supported
>     by the lcd controller in KHz.
> + - blue-and-red-wiring: Recognized values "default", "straight" or

Need to drop default from here. With that,

Acked-by: Rob Herring <robh@xxxxxxxxxx>

> +   "crossed". This property deals with the LCDC revision 2 (found on
> +   AM335x) color errata [1].
> +    - "straight" indicates normal wiring that supports RGB565,
> +      BGR888, and XBGR8888 color formats.
> +    - "crossed" indicates wiring that has blue and red wires
> +      crossed. This setup supports BGR565, RGB888 and XRGB8888
> +      formats.
> +    - If the property is not present or its value is not recognized
> +      the legacy mode is assumed. This configuration supports RGB565,
> +      RGB888 and XRGB8888 formats. However, depending on wiring, the red
> +      and blue colors are swapped in either 16 or 24-bit color modes.
>  
>  Optional nodes:
>  
> @@ -28,6 +40,14 @@ Optional nodes:
>     Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting
>     tfp410 DVI encoder or lcd panel to lcdc
>  
> +[1] There is an errata about AM335x color wiring. For 16-bit color mode
> +    the wires work as they should (LCD_DATA[0:4] is for Blue[3:7]),
> +    but for 24 bit color modes the wiring of blue and red components is
> +    crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is
> +    for Blue[3-7]. For more details see section 3.1.1 in AM335x
> +    Silicon Errata:
> +    http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
> +
>  Example:
>  
>  	fb: fb@4830e000 {
> @@ -37,6 +57,8 @@ Example:
>  		interrupts = <36>;
>  		ti,hwmods = "lcdc";
>  
> +		blue-and-red-wiring = "crossed";
> +
>  		port {
>  			lcdc_0: endpoint@0 {
>  				remote-endpoint = <&hdmi_0>;
> diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
> index e45c268..ed4dc5c 100644
> --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
> +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
> @@ -33,6 +33,20 @@
>  
>  static LIST_HEAD(module_list);
>  
> +static const u32 tilcdc_rev1_formats[] = { DRM_FORMAT_RGB565 };
> +
> +static const u32 tilcdc_straight_formats[] = { DRM_FORMAT_RGB565,
> +					       DRM_FORMAT_BGR888,
> +					       DRM_FORMAT_XBGR8888 };
> +
> +static const u32 tilcdc_crossed_formats[] = { DRM_FORMAT_BGR565,
> +					      DRM_FORMAT_RGB888,
> +					      DRM_FORMAT_XRGB8888 };
> +
> +static const u32 tilcdc_legacy_formats[] = { DRM_FORMAT_RGB565,
> +					     DRM_FORMAT_RGB888,
> +					     DRM_FORMAT_XRGB8888 };
> +
>  void tilcdc_module_init(struct tilcdc_module *mod, const char *name,
>  		const struct tilcdc_module_ops *funcs)
>  {
> @@ -318,6 +332,33 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags)
>  
>  	pm_runtime_put_sync(dev->dev);
>  
> +	if (priv->rev == 1) {
> +		DBG("Revision 1 LCDC supports only RGB565 format");
> +		priv->pixelformats = tilcdc_rev1_formats;
> +		priv->num_pixelformats = ARRAY_SIZE(tilcdc_rev1_formats);
> +	} else {
> +		const char *str = "\0";
> +
> +		of_property_read_string(node, "blue-and-red-wiring", &str);
> +		if (0 == strcmp(str, "crossed")) {
> +			DBG("Configured for crossed blue and red wires");
> +			priv->pixelformats = tilcdc_crossed_formats;
> +			priv->num_pixelformats =
> +				ARRAY_SIZE(tilcdc_crossed_formats);
> +		} else if (0 == strcmp(str, "straight")) {
> +			DBG("Configured for straight blue and red wires");
> +			priv->pixelformats = tilcdc_straight_formats;
> +			priv->num_pixelformats =
> +				ARRAY_SIZE(tilcdc_straight_formats);
> +		} else {
> +			DBG("Blue and red wiring '%s' unknown, use legacy mode",
> +			    str);
> +			priv->pixelformats = tilcdc_legacy_formats;
> +			priv->num_pixelformats =
> +				ARRAY_SIZE(tilcdc_legacy_formats);
> +		}
> +	}
> +
>  	ret = modeset_init(dev);
>  	if (ret < 0) {
>  		dev_err(dev->dev, "failed to initialize mode setting\n");
> diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h
> index 13001df..0e19c14 100644
> --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h
> +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h
> @@ -65,6 +65,10 @@ struct tilcdc_drm_private {
>  	 */
>  	uint32_t max_width;
>  
> +	/* Supported pixel formats */
> +	const uint32_t *pixelformats;
> +	uint32_t num_pixelformats;
> +
>  	/* The context for pm susped/resume cycle is stored here */
>  	struct drm_atomic_state *saved_state;
>  
> diff --git a/drivers/gpu/drm/tilcdc/tilcdc_plane.c b/drivers/gpu/drm/tilcdc/tilcdc_plane.c
> index 41911e3..74c65fa 100644
> --- a/drivers/gpu/drm/tilcdc/tilcdc_plane.c
> +++ b/drivers/gpu/drm/tilcdc/tilcdc_plane.c
> @@ -24,10 +24,6 @@
>  
>  #include "tilcdc_drv.h"
>  
> -static const u32 tilcdc_formats[] = { DRM_FORMAT_RGB565,
> -				      DRM_FORMAT_RGB888,
> -				      DRM_FORMAT_XRGB8888 };
> -
>  static struct drm_plane_funcs tilcdc_plane_funcs = {
>  	.update_plane	= drm_atomic_helper_update_plane,
>  	.disable_plane	= drm_atomic_helper_disable_plane,
> @@ -114,12 +110,13 @@ static const struct drm_plane_helper_funcs plane_helper_funcs = {
>  int tilcdc_plane_init(struct drm_device *dev,
>  		      struct drm_plane *plane)
>  {
> +	struct tilcdc_drm_private *priv = dev->dev_private;
>  	int ret;
>  
>  	ret = drm_plane_init(dev, plane, 1,
>  			     &tilcdc_plane_funcs,
> -			     tilcdc_formats,
> -			     ARRAY_SIZE(tilcdc_formats),
> +			     priv->pixelformats,
> +			     priv->num_pixelformats,
>  			     true);
>  	if (ret) {
>  		dev_err(dev->dev, "Failed to initialize plane: %d\n", ret);
> -- 
> 1.9.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux