On Wed, Aug 17, 2016 at 01:49:45PM +0300, Mika Kahola wrote:
> Filter out a mode that exceeds the max pixel rate setting
> for DP to VGA dongle. This is defined in DPCD register 0x81
> if detailed cap info i.e. info field is 4 bytes long and
> it is available for DP downstream port.
>
> The register defines the pixel rate divided by 8 in MP/s.
>
> v2: DPCD read outs and computation moved to drm (Ville, Daniel)
> v3: Sink pixel rate computation moved to drm_dp_max_sink_dotclock()
> function (Daniel)
> v4: Use of drm_dp_helper.c routines to compute max pixel clock (Ville)
> v5: Use of intel_dp->downstream_ports to read out port capabilities.
> Code restructuring (Ville)
> v6: Move DP branch device check to drm_dp_helper.c (Daniel)
> v7: Cleanup as suggested by Ville
>
> Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
Reviewed-by: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 27 ++++++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 91ffb79..25f459e 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -190,6 +190,29 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
> return (max_link_clock * max_lanes * 8) / 10;
> }
>
> +static int
> +intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp)
> +{
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + struct intel_encoder *encoder = &intel_dig_port->base;
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + int max_dotclk = dev_priv->max_dotclk_freq;
> + int ds_max_dotclk;
> +
> + int type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
> +
> + if (type != DP_DS_PORT_TYPE_VGA)
> + return max_dotclk;
> +
> + ds_max_dotclk = drm_dp_downstream_max_clock(intel_dp->dpcd,
> + intel_dp->downstream_ports);
> +
> + if (ds_max_dotclk != 0)
> + max_dotclk = min(max_dotclk, ds_max_dotclk);;
> +
> + return max_dotclk;
> +}
> +
> static enum drm_mode_status
> intel_dp_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *mode)
> @@ -199,7 +222,9 @@ intel_dp_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> int target_clock = mode->clock;
> int max_rate, mode_rate, max_lanes, max_link_clock;
> - int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> + int max_dotclk;
> +
> + max_dotclk = intel_dp_downstream_max_dotclock(intel_dp);
>
> if (is_edp(intel_dp) && fixed_mode) {
> if (mode->hdisplay > fixed_mode->hdisplay)
> --
> 1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
