Hi Stefan, I had tested the patches on LS1021A-TWR board using drmlib. Like set three overlays: root@ls1021atwr:~# ./modetest -P 39:900x100+10+10@RG24 -P 39:200x200+300+0@RG24 -P 39:200x200+400+300@RG24 How did you test the overlays and cursor layer, I mean I see you using x-window like thing in the video. Best Regards, Meng > This patchset adds overlay and cursor plane support. It also fixes some issues > uncovered during implementation of this. > > However, the plane updates currently causes the display to flicker for unknown > reasons. As far as I can tell, the CRTC atomic_flush should trigger the update > correctly via READREG, which according to > documentation: > The READREG bit causes a single transfer to begin at the next frame blanking > period. This bit is cleared when the transfer is complete. > > I made a video how that looks: > https://cloud.agner.ch/index.php/s/Yfqa2u7UBEWUT8N > > Any ideas? > > Stefan Agner (4): > drm/fsl-dcu: support overlay and cursor planes > drm/fsl-dcu: respect pos/size register sizes > drm/fsl-dcu: update all registers on flush > drm/fsl-dcu: do not update when modifying irq registers > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 50 > ++++++++++++++++++++++++----- > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 4 --- > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 8 ++--- > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c | 42 +++++++++++------------- > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h | 3 +- > 5 files changed, 67 insertions(+), 40 deletions(-) > > -- > 2.9.3 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
