Hi,
On Thu, Sep 1, 2016 at 11:32 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> The LCD output needs to be muxed. Add the proper pinctrl node.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-a33.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
> index 5f9dbd17eb50..d5f93c05846f 100644
> --- a/arch/arm/boot/dts/sun8i-a33.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a33.dtsi
> @@ -300,6 +300,16 @@
> interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
>
> + tcon0_rgb666_pins_a: tcon0_rgb666@0 {
This is the only possible combination. You can drop the _a and @0.
Also this can be shared with A23, as they are pin compatible, and I
also matched the datasheets.
Otherwise
Acked-by: Chen-Yu Tsai <wens@xxxxxxxx>
> + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
> + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
> + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
> + "PD24", "PD25", "PD26", "PD27";
> + allwinner,function = "lcd0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> uart0_pins_b: uart0@1 {
> allwinner,pins = "PB0", "PB1";
> allwinner,function = "uart0";
> --
> 2.9.2
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> For more options, visit https://groups.google.com/d/optout.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
