On Fri, Aug 26, 2016 at 05:49:54PM +0200, Lucas Stach wrote: > The devicetree documentation states that those are required properties, > so the driver should refuse to probe if those are absent to be > consistent. This will also allow to drop some error checking from the > clock enable/disable paths. NAK. Thanks for reviewing the existing DT files before proposing this change and noticing that you're going to wilfully end up breaking existing users. A simple grep would have sufficed. The DT binding doc is wrong: there is only one documented clock on Dove and that's for the GPU core. (The Dove documentation as far as clocks go is very poor.) So, what's Dove supposed to do - make up some ficticious clock? -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
