Re: [PATCH v2 1/4] ARM: dts: exynos: Enable HDMI for Arndale Octa board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Milo,

On 08/24/2016 04:25 AM, Milo Kim wrote:
> * Support HDMI display data channel
>   I2C #2 is assigned for the HDMI DDC. It enables the EDID access.
>
> * GPIO for HDMI hot plug detect
>   GPX3_7 is used. The HPD awareness is done when the GPIO is active high and
>   single ended.
>
> * Enable HDMI block in Exynos5420
>   HDMI PLL consumes 1.0V LDO6 (PVDD_ANAIP_1V0) and HDMI oscillator requires
>   1.8V LDO7 (PVDD_ANAIP_1V8).
>
> Cc: Kukjin Kim <kgene@xxxxxxxxxx>
> Cc: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> Cc: David Airlie <airlied@xxxxxxxx>
> Cc: Inki Dae <inki.dae@xxxxxxxxxxx>
> Cc: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
> Cc: Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx>
> Cc: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-samsung-soc@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> Signed-off-by: Milo Kim <woogyom.kim@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/exynos5420-arndale-octa.dts | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> index 39a3b81..df362a2 100644
> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> @@ -70,6 +70,23 @@
>  	status = "disabled";
>  };
>  
> +&i2c_2 {
> +	samsung,i2c-slave-addr = <0x50>;
> +	status = "okay";
> +
> +	hdmiddc@50 {
> +		compatible = "samsung,exynos4210-hdmiddc";
> +		reg = <0x50>;
> +	};
> +};
> +
> +&hdmi {
> +	hpd-gpios = <&gpx3 7 GPIO_OPEN_SOURCE>;
> +	vdd_osc-supply = <&ldo7_reg>;
> +	vdd_pll-supply = <&ldo6_reg>;
> +	status = "okay";

Please use ddc property in hdmi node, instead of this legacy binding.
See exynos4210-universal_c210.dts or exynos4412-odroid-common.dtsi for
reference.

Regards
Andrzej

> +};
> +
>  &hsi2c_4 {
>  	status = "okay";
>  


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux