Hi, Philipp, On Thu, 2016-08-11 at 09:15 +0200, Philipp Zabel wrote: > Am Donnerstag, den 04.08.2016, 10:38 +0800 schrieb Bibby Hsieh: > > From: Junzhi Zhao <junzhi.zhao@xxxxxxxxxxxx> > > > > Pixel clock should be 297MHz when resolution is 4K. > > > > Signed-off-by: Junzhi Zhao <junzhi.zhao@xxxxxxxxxxxx> > > Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx> > > --- > > drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++++++-- > > 1 file changed, 6 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > > index d05ca79..a90af59 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > @@ -438,10 +438,14 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > > } > > > > pix_rate = 1000UL * mode->clock; > > - if (mode->clock <= 74000) > > + if (mode->clock <= 27000) > > + factor = 16 * 3; > > + else if (mode->clock <= 74250) > > factor = 8 * 3; > > - else > > + else if (mode->clock <= 167000) > > factor = 4 * 3; > > + else > > + factor = 2 * 3; > > pll_rate = pix_rate * factor; > > > > dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n", > > Could you add a comment why this also changes the 74 MHz limit to 74.25 > MHz and that adds a factor 16*3 for clocks <= 27 MHz ? > Because the valid range of tvdpll is from 1GHz to 2GHz, so, we have to make the clock to fit that. > regards > Philipp > -- Bibby _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
