[PATCH 19/20] drm: docume drm_display_info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We seem to have a bit a mess in how to describe the bus formats, with
a multitude of competing ways. Might be best to consolidate it all and
use MEDIA_BUS_FMT_ also for the hdmi color formats and high color
modes.

Also move all the display_info related functions into drm_connector.c
(there's only one) to group it all together. I did decided against
also moving the edid related display info functions, they seem to fit
better in drm_edid.c. Instead sprinkle a few cross references around.
While at that reduce the kerneldoc for static functions, there's not
point in documenting internals with that much detail really.

Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
---
 drivers/gpu/drm/drm_connector.c         | 34 ++++++++++++++++++
 drivers/gpu/drm/drm_crtc.c              | 34 ------------------
 drivers/gpu/drm/drm_edid.c              | 23 +++---------
 drivers/gpu/drm/gma500/cdv_intel_lvds.c |  8 -----
 include/drm/drm_connector.h             | 63 ++++++++++++++++++++++++++++++---
 include/drm/drm_crtc.h                  |  4 ---
 6 files changed, 97 insertions(+), 69 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index cedc3bc4e10b..9e93e0d13117 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -506,6 +506,40 @@ static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
 };
 DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
 
+/**
+ * drm_display_info_set_bus_formats - set the supported bus formats
+ * @info: display info to store bus formats in
+ * @formats: array containing the supported bus formats
+ * @num_formats: the number of entries in the fmts array
+ *
+ * Store the supported bus formats in display info structure.
+ * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for
+ * a full list of available formats.
+ */
+int drm_display_info_set_bus_formats(struct drm_display_info *info,
+				     const u32 *formats,
+				     unsigned int num_formats)
+{
+	u32 *fmts = NULL;
+
+	if (!formats && num_formats)
+		return -EINVAL;
+
+	if (formats && num_formats) {
+		fmts = kmemdup(formats, sizeof(*formats) * num_formats,
+			       GFP_KERNEL);
+		if (!fmts)
+			return -ENOMEM;
+	}
+
+	kfree(info->bus_formats);
+	info->bus_formats = fmts;
+	info->num_bus_formats = num_formats;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_display_info_set_bus_formats);
+
 /* Optional connector properties. */
 static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
 	{ DRM_MODE_SCALE_NONE, "None" },
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 69b5626141f5..7bcfb3466ba9 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -391,40 +391,6 @@ void drm_crtc_cleanup(struct drm_crtc *crtc)
 }
 EXPORT_SYMBOL(drm_crtc_cleanup);
 
-/**
- * drm_display_info_set_bus_formats - set the supported bus formats
- * @info: display info to store bus formats in
- * @formats: array containing the supported bus formats
- * @num_formats: the number of entries in the fmts array
- *
- * Store the supported bus formats in display info structure.
- * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for
- * a full list of available formats.
- */
-int drm_display_info_set_bus_formats(struct drm_display_info *info,
-				     const u32 *formats,
-				     unsigned int num_formats)
-{
-	u32 *fmts = NULL;
-
-	if (!formats && num_formats)
-		return -EINVAL;
-
-	if (formats && num_formats) {
-		fmts = kmemdup(formats, sizeof(*formats) * num_formats,
-			       GFP_KERNEL);
-		if (!fmts)
-			return -ENOMEM;
-	}
-
-	kfree(info->bus_formats);
-	info->bus_formats = fmts;
-	info->num_bus_formats = num_formats;
-
-	return 0;
-}
-EXPORT_SYMBOL(drm_display_info_set_bus_formats);
-
 static int drm_encoder_register_all(struct drm_device *dev)
 {
 	struct drm_encoder *encoder;
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 553390fae803..a4a576424a66 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -3727,14 +3727,7 @@ bool drm_rgb_quant_range_selectable(struct edid *edid)
 }
 EXPORT_SYMBOL(drm_rgb_quant_range_selectable);
 
-/**
- * drm_assign_hdmi_deep_color_info - detect whether monitor supports
- * hdmi deep color modes and update drm_display_info if so.
- * @edid: monitor EDID information
- * @info: Updated with maximum supported deep color bpc and color format
- *        if deep color supported.
- * @connector: DRM connector, used only for debug output
- *
+/*
  * Parse the CEA extension according to CEA-861-B.
  * Return true if HDMI deep color supported, false if not or unknown.
  */
@@ -3828,16 +3821,6 @@ static bool drm_assign_hdmi_deep_color_info(struct edid *edid,
 	return false;
 }
 
-/**
- * drm_add_display_info - pull display info out if present
- * @edid: EDID data
- * @info: display info (attached to connector)
- * @connector: connector whose edid is used to build display info
- *
- * Grab any available display info and stuff it into the drm_display_info
- * structure that's part of the connector.  Useful for tracking bpp and
- * color spaces.
- */
 static void drm_add_display_info(struct edid *edid,
                                  struct drm_display_info *info,
                                  struct drm_connector *connector)
@@ -4044,7 +4027,9 @@ static int add_displayid_detailed_modes(struct drm_connector *connector,
  * @connector: connector we're probing
  * @edid: EDID data
  *
- * Add the specified modes to the connector's mode list.
+ * Add the specified modes to the connector's mode list. Also fills out the
+ * &drm_display_info structure in @connector with any information which can be
+ * derived from the edid.
  *
  * Return: The number of modes added or 0 if we couldn't find any.
  */
diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
index 38dc89083148..ea733ab5b1e0 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -415,14 +415,6 @@ static int cdv_intel_lvds_get_modes(struct drm_connector *connector)
 	if (ret)
 		return ret;
 
-	/* Didn't get an EDID, so
-	 * Set wide sync ranges so we get all modes
-	 * handed to valid_mode for checking
-	 */
-	connector->display_info.min_vfreq = 0;
-	connector->display_info.max_vfreq = 200;
-	connector->display_info.min_hfreq = 0;
-	connector->display_info.max_hfreq = 200;
 	if (mode_dev->panel_fixed_mode != NULL) {
 		struct drm_display_mode *mode =
 		    drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index fa42d2071bfb..11c13c0be5d4 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -84,28 +84,69 @@ enum subpixel_order {
 	SubPixelNone,
 };
 
-/*
- * Describes a given display (e.g. CRT or flat panel) and its limitations.
+/**
+ * struct drm_display_info - runtime data about the connected sink
+ *
+ * Describes a given display (e.g. CRT or flat panel) and its limitations. For
+ * fixed display sinks like built-in panels there's not much difference between
+ * this and struct &drm_connector. But for sinks with a real cable this
+ * structure is meant to describe all the things at the other end of the cable.
+ *
+ * For sinks which provide an EDID this can be filled out by calling
+ * drm_add_edid_modes().
  */
 struct drm_display_info {
+	/**
+	 * @name: Name of the display.
+	 */
 	char name[DRM_DISPLAY_INFO_LEN];
 
-	/* Physical size */
+	/**
+	 * @width_mm: Physical width in mm.
+	 */
         unsigned int width_mm;
+	/**
+	 * @height_mm: Physical width in mm.
+	 */
 	unsigned int height_mm;
 
+	/**
+	 * @pixel_clock: Maximum pixel clock supported by the sink, in units of
+	 * 100Hz. This mismatches the clok in &drm_display_mode (which is in
+	 * kHZ), because that's what the EDID uses as base unit.
+	 */
 	unsigned int pixel_clock;
+	/**
+	 * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs.
+	 */
 	unsigned int bpc;
 
+	/**
+	 * @subpixel_order: Subpixel order of LCD panels.
+	 */
 	enum subpixel_order subpixel_order;
 
 #define DRM_COLOR_FORMAT_RGB444		(1<<0)
 #define DRM_COLOR_FORMAT_YCRCB444	(1<<1)
 #define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
 
+	/**
+	 * @color_formats: HDMI Color formats, selects between RGB and YCrCb
+	 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
+	 * as used to describe the pixel format in framebuffers, and also don't
+	 * match the formats in @bus_formats which are shared with v4l.
+	 */
 	u32 color_formats;
 
+	/**
+	 * @bus_formats: Pixel data format on the wire, somewhat redundant with
+	 * @color_formats. Array of size @num_bus_formats encoded using
+	 * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers.
+	 */
 	const u32 *bus_formats;
+	/**
+	 * @num_bus_formats: Size of @bus_formats array.
+	 */
 	unsigned int num_bus_formats;
 
 #define DRM_BUS_FLAG_DE_LOW		(1<<0)
@@ -115,14 +156,28 @@ struct drm_display_info {
 /* drive data on neg. edge */
 #define DRM_BUS_FLAG_PIXDATA_NEGEDGE	(1<<3)
 
+	/**
+	 * @bus_flags: Additional information (like pixel signal polarity) for
+	 * the pixel data on the bus, using DRM_BUS_FLAGS\_ defines.
+	 */
 	u32 bus_flags;
 
-	/* Mask of supported hdmi deep color modes */
+	/**
+	 * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even
+	 * more stuff redundant with @bus_formats.
+	 */
 	u8 edid_hdmi_dc_modes;
 
+	/**
+	 * @cea_rev: CEA revision of the HDMI sink.
+	 */
 	u8 cea_rev;
 };
 
+int drm_display_info_set_bus_formats(struct drm_display_info *info,
+				     const u32 *formats,
+				     unsigned int num_formats);
+
 /**
  * struct drm_connector_state - mutable connector state
  * @connector: backpointer to the connector
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index accae9ed6cd7..787d2943a920 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -2194,10 +2194,6 @@ extern void drm_mode_config_init(struct drm_device *dev);
 extern void drm_mode_config_reset(struct drm_device *dev);
 extern void drm_mode_config_cleanup(struct drm_device *dev);
 
-extern int drm_display_info_set_bus_formats(struct drm_display_info *info,
-					    const u32 *formats,
-					    unsigned int num_formats);
-
 static inline bool drm_property_type_is(struct drm_property *property,
 		uint32_t type)
 {
-- 
2.8.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux