On Fri, Aug 05, 2016 at 10:06:08AM +0200, Daniel Vetter wrote: > On Fri, Aug 05, 2016 at 12:01:25AM +0100, Russell King - ARM Linux wrote: > > On Thu, Aug 04, 2016 at 06:13:18PM +0100, Jose Abreu wrote: > > > Hi Russell, > > > > > > So, I didn't use framebuffer console but used X instead and it is > > > working as it should. I think we can drop this patch. I am now > > > making interoperability with DVI and I am facing the following > > > scenario: > > > - I start the driver > > > - An EDID is sent which tells the driver that HDMI is NOT > > > supported; > > > - The driver configures itself to a DVI mode; > > > > > > Until this point everything is working as it should. But: > > > > > > - Now I send an EDID which tells the driver that HDMI is > > > supported; > > > - As the EDID has the same preferred mode the user will not > > > reconfigure the mode and there will be no change to HDMI mode. > > > > The EDID should still be read, but as you say, userspace doesn't take > > any action because it sees that the mode parameters are still the same, > > as you have identified. > > > > > The missing change to HDMI mode will cause the test to fail. The > > > workaround that I am using is to reconfigure to another video > > > mode and then configure to the preferred one but I think this > > > could be fixed in the driver, right? > > > > This one is extremely awkward - to fix it, we would need to check to > > see whether we reconfigure the hardware each time we read the EDID, > > and I don't think that's a particularly nice thing to do. > > > > I'd like to hear what other DRM developers think about this issue. > > I pondored whether we should have a counter on each connector for probe > state, which helpers would increment whenever something changes, like: > - connector_status (as tracked by probe helpers) > - anything in the edid changes (when setting it > drm_mode_connector_update_edid_property) > - other changes (like sink state changes in dpcd or whatever) > > That way userspace would be able to reliably spot such changes and do a > new modeset. Yes, please. I have had similar wishes for state changes and overall modeset counters. -Chris -- Chris Wilson, Intel Open Source Technology Centre _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
