> -----Original Message----- > From: Peter Wu [mailto:peter@xxxxxxxxxxxxx] > Sent: Thursday, July 28, 2016 8:00 PM > To: Lukas Wunner > Cc: Deucher, Alexander; dri-devel@xxxxxxxxxxxxxxxxxxxxx; Christoph Haag; > Koenig, Christian; amd-gfx@xxxxxxxxxxxxxxxxxxxxx; Zhang, Hawking > Subject: Re: ATPX changes in drm-next-4.8 and D3cold handling > > On Thu, Jul 28, 2016 at 05:40:31PM +0200, Lukas Wunner wrote: > > On Thu, Jul 28, 2016 at 03:33:25PM +0000, Deucher, Alexander wrote: > > > > From: Peter Wu [mailto:peter@xxxxxxxxxxxxx] > > > > Sent: Thursday, July 21, 2016 6:43 AM > > > > In case you missed it, Dave's D3cold patches were succeeded by > changes > > > > in PCI core. Relevant commits in the pci/pm branch: > > > > > > > > 006d44e PCI: Add runtime PM support for PCIe ports > > > > 16468c7 ACPI / hotplug / PCI: Runtime resume bridge before rescan > > > > d963f65 PCI: Power on bridges before scanning new devices > > > > 9d26d3a PCI: Put PCIe ports into D3 during suspend > > > > 43f7f88 PCI: Don't clear d3cold_allowed for PCIe ports > > > > > > Did those get merged yet? > > > > They will go into 4.8. Should have gone into 4.7 already but were > > dropped at the last minute. > > > > > > > I just need to revert this commit once the d3cold patches land: > > > https://cgit.freedesktop.org/~agd5f/linux/commit/?h=drm-next- > 4.8&id=bdfb76040068d960cb9e226876be8a508d741c4a > > > > So you probably need to revert this now. > > > > Best regards, > > Lukas > > It is better to revert it before the PCI/PM patches get merged, > otherwise you risk that the device is already put in D3 before the > bridge tries to do it again. This is currently happening with nouveau on > -next. > > Do these AMD hw exist on BIOSes pre-2015? Currently the D3cold work in > the PCI/PM branch only enable the D3cold handling via the bridge when > the BIOS is >= 2015. Systems designed for windows 10 use d3 cold rather than the legacy interfaces. Setting the ACPI OSI to windows10 will enable d3cold, setting it to a previous version of windows will use the old method. At least on AMD PX systems there is a bit in the ATPX information block that indicates the current setting hybrid graphics (aka d3cold) or the ATPX power control for dGPU power control. Alex > -- > Kind regards, > Peter Wu > https://lekensteyn.nl _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
