[PATCH v1 2/2] drm/bridge: analogix_dp: turn off the panel when eDP need to disable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some panels (like Sharp LQ123P1JX31) need to be turn off when eDP
controller stop to send valid video signal, otherwhise panel would
go burn in, and keep flicker and flicker.

So it's better to turn off the panel when eDP need to disable, and
we need to turn on the panel in connector->detect() callback, so
that driver would detect panel status rightly.

Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 32715da..ea059b3 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -961,6 +961,14 @@ analogix_dp_detect(struct drm_connector *connector, bool force)
 {
 	struct analogix_dp_device *dp = to_dp(connector);
 
+	/*
+	 * Panle would prepare for several times here, but don't worry it
+	 * would only enable the hardware at the first prepare time.
+	 */
+	if (dp->plat_data->panel)
+		if (drm_panel_prepare(dp->plat_data->panel))
+			DRM_ERROR("failed to setup the panel\n");
+
 	if (analogix_dp_detect_hpd(dp))
 		return connector_status_disconnected;
 
@@ -1063,7 +1071,8 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
 		return;
 
 	if (dp->plat_data->panel) {
-		if (drm_panel_disable(dp->plat_data->panel)) {
+		if (drm_panel_disable(dp->plat_data->panel) ||
+		    drm_panel_unprepare(dp->plat_data->panel)) {
 			DRM_ERROR("failed to disable the panel\n");
 			return;
 		}
@@ -1333,13 +1342,6 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 
 	phy_power_on(dp->phy);
 
-	if (dp->plat_data->panel) {
-		if (drm_panel_prepare(dp->plat_data->panel)) {
-			DRM_ERROR("failed to setup the panel\n");
-			return -EBUSY;
-		}
-	}
-
 	analogix_dp_init_dp(dp);
 
 	ret = devm_request_threaded_irq(&pdev->dev, dp->irq,
-- 
1.9.1


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux