Am Mittwoch, den 20.07.2016, 12:03 +0800 schrieb Bibby Hsieh:
> From: Junzhi Zhao <junzhi.zhao@xxxxxxxxxxxx>
>
> Pixel clock should be 297MHz when resolution is 4K.
>
> Signed-off-by: Junzhi Zhao <junzhi.zhao@xxxxxxxxxxxx>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 184 +++++++++++++++++++++++++-----------
> 1 file changed, 131 insertions(+), 53 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index d05ca79..c0f04d2 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -60,14 +60,35 @@ enum mtk_dpi_out_color_format {
> MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL
> };
>
> +enum mtk_dpi_clk_id {
> + MTK_DPI_CLK_DPI_ENGINE,
> + MTK_DPI_CLK_DPI_PIXEL,
> + MTK_DPI_CLK_TVD_PLL,
> + MTK_DPI_CLK_TVDPLL_MUX,
> + MTK_DPI_CLK_TVDPLL_D2,
> + MTK_DPI_CLK_TVDPLL_D4,
> + MTK_DPI_CLK_TVDPLL_D8,
> + MTK_DPI_CLK_TVDPLL_D16,
> + MTK_DPI_CLK_COUNT,
> +};
I think this is going in the wrong direction. If the pixel clock output
isn't correct after a clk_set_rate(dpi->pixel_clk, rate), the clock
drivers should be fixed, not worked around in the dpi driver.
The TVDPLL_* mux and dividers are not direct inputs to the DPI module:
tvdpll ("pll")
| ..|\
v ..| | mm_sel ----> mm_dpi_engine ("engine")
tvdpll_594m(1/3) ..|/
|
|`-> tvdpll_d2 -->|\
|`-> tvdpll_d4 -->| | dpi0_sel --> mm_dpi_pixel ("pixel")
|`-> tvdpll_d8 -->| |
`--> tvdpll_d16 ->|/
Currently the code first sets the "pll" to the desired multiple of the
pixel clock manually (*3*4, *3*8) and than calls clk_set_rate on the
"pixel" clock which gets propagated by the clock framework up to
dpi0_sel. Since dpi0_sel doesn't have the CLK_SET_RATE_PARENT flag set,
it should just choose the tvdpll_d* input divider. I'd like not to give
the dpi driver direct access to all the intermediate clocks.
regards
Philipp
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
