Re: [PATCH v3 1/2] dt-bindings: tc358767: add DT documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 13, 2016 at 09:07:10AM +0200, Philipp Zabel wrote:
> Add DT binding documentation for the Toshiba TC358767 eDP bridge.
> 
> Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> ---
>  .../bindings/display/bridge/toshiba,tc358767.txt   | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
> new file mode 100644
> index 0000000..05ada28
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
> @@ -0,0 +1,51 @@
> +Toshiba TC358767 eDP bridge bindings
> +
> +Required properties:
> + - compatible: "toshiba,tc358767"
> + - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
> + - clock-names: should be "ref"
> + - clocks: OF device-tree clock specification for refclk input. The reference
> +   clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
> +
> +Optional properties:
> + - shutdown-gpios: OF device-tree gpio specification for SD pin
> +                   (active high shutdown input)
> + - reset-gpios: OF device-tree gpio specification for RSTX pin
> +                (active low system reset)
> + - ports: the ports node can contain video interface port nodes to connect
> +   to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
> +    - port@0: DSI input port
> +    - port@1: DPI input port
> +    - port@2: eDP/DP output port
> +
> +[1]: Documentation/devicetree/bindings/graph.txt
> +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +	edp-bridge@68 {
> +		compatible = "toshiba,tc358767";
> +		reg = <0x68>;
> +		shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
> +		reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
> +		clock-names = "ref";
> +		clocks = <&edp_refclk>;
> +
> +		ports {

You are missing #size-cells and #address-cells here, otherwise:

Acked-by: Rob Herring <robh@xxxxxxxxxx>

> +			port@1 {
> +				reg = <1>;
> +
> +				bridge_in: endpoint {
> +					remote-endpoint = <&dpi_out>;
> +				};
> +			};
> +
> +			port@2 {
> +				reg = <2>;
> +
> +				bridge_out: endpoint {
> +					remote-endpoint = <&panel_in>;
> +				};
> +			};
> +		};
> +	};
> +
> -- 
> 2.8.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux