Am Donnerstag, den 07.07.2016, 16:03 -0700 schrieb Steve Longerbeam:
> Adds ipu_set_vdi_src_mux() that selects the VDIC input
> (from CSI or memory).
>
> Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
> ---
> drivers/gpu/ipu-v3/ipu-common.c | 20 ++++++++++++++++++++
> include/video/imx-ipu-v3.h | 1 +
> 2 files changed, 21 insertions(+)
>
> diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
> index 6d1676e..374100e 100644
> --- a/drivers/gpu/ipu-v3/ipu-common.c
> +++ b/drivers/gpu/ipu-v3/ipu-common.c
> @@ -730,6 +730,26 @@ void ipu_set_ic_src_mux(struct ipu_soc *ipu, int csi_id, bool vdi)
> }
> EXPORT_SYMBOL_GPL(ipu_set_ic_src_mux);
>
> +/*
> + * Set the source for the VDIC. Selects either from CSI[01] or memory.
> + */
> +void ipu_set_vdi_src_mux(struct ipu_soc *ipu, bool csi)
> +{
> + unsigned long flags;
> + u32 val;
> +
> + spin_lock_irqsave(&ipu->lock, flags);
> +
> + val = ipu_cm_read(ipu, IPU_FS_PROC_FLOW1);
> + val &= ~(0x3 << 28);
> + if (csi)
> + val |= (0x01 << 28);
This doesn't set a bus mux, or does it? As I understand it, this
configures the FSU to trigger the VDIC conversion from the CSI direct
channel sync signals (IC channel CB7). As such I believe this belongs
together with the other channel linking code, maybe even in ipu-fsu.c.
Also, some #defines would be nice, for example:
#define FS_VDI_SRC_SEL_MASK (0x3 << 28)
#define FS_VDI_SRC_SEL_OFFSET 28
#define FS_VDI_SRC_SEL_CSI_DIRECT 0x1
#define FS_VDI_SRC_SEL_VDOA 0x2
regards
Philipp
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
