On Wed, Jul 06, 2016 at 02:04:54PM +0300, Mika Kahola wrote:
> Read DisplayPort branch device info from through debugfs
> interface.
>
> v2: use drm_dp_helper routines to collect data
> v3: cleanup to match the drm_dp_helper.c patches introduced
> earlier in this series
> v4: move DP branch device info to function 'intel_dp_branch_device_info()'
>
> Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
Shouldn't we do any additional debugfs support at the dp helper level too?
That way the parsing and debug code are all in the same place. Driver's
shouldn't even need to register the debugfs files themselves imo.
-Daniel
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 75 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 9989b6a..7f57b3c 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -2942,16 +2942,91 @@ static void intel_panel_info(struct seq_file *m, struct intel_panel *panel)
> intel_seq_print_mode(m, 2, mode);
> }
>
> +static void intel_dp_branch_device_info(struct seq_file *m, struct intel_dp *intel_dp)
> +{
> + struct drm_dp_revision rev;
> + bool detailed_cap_info = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> + DP_DETAILED_CAP_INFO_AVAILABLE;
> + int type;
> + int clk;
> + int bpc;
> + char id[6];
> +
> + type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
> +
> + switch (type) {
> + case DP_DS_PORT_TYPE_DP:
> + seq_printf(m, "\ttype: DisplayPort\n");
> + break;
> + case DP_DS_PORT_TYPE_VGA:
> + seq_printf(m, "\ttype: VGA\n");
> + break;
> + case DP_DS_PORT_TYPE_DVI:
> + seq_printf(m, "\ttype: DVI\n");
> + break;
> + case DP_DS_PORT_TYPE_HDMI:
> + seq_printf(m, "\ttype: HDMI\n");
> + break;
> + case DP_DS_PORT_TYPE_NON_EDID:
> + seq_printf(m, "\ttype: others without EDID support\n");
> + break;
> + case DP_DS_PORT_TYPE_DP_DUALMODE:
> + seq_printf(m, "\ttype: DP++\n");
> + break;
> + case DP_DS_PORT_TYPE_WIRELESS:
> + seq_printf(m, "\ttype: Wireless\n");
> + break;
> + default:
> + seq_printf(m, "\ttype: N/A\n");
> + }
> +
> + drm_dp_downstream_id(&intel_dp->aux, id);
> + seq_printf(m, "\tDevice id: %s\n", id);
> +
> + rev = drm_dp_downstream_hw_rev(&intel_dp->aux);
> + seq_printf(m, "\tHW revision: %.2d.%.2d\n", rev.major, rev.minor);
> +
> + rev = drm_dp_downstream_sw_rev(&intel_dp->aux);
> + seq_printf(m, "\tSW revision: %.2d.%.2d\n", rev.major, rev.minor);
> +
> + if (detailed_cap_info) {
> + clk = drm_dp_downstream_max_clock(intel_dp->dpcd,
> + intel_dp->downstream_ports);
> +
> + if (clk > 0) {
> + if (type == DP_DS_PORT_TYPE_VGA)
> + seq_printf(m, "\tMax dot clock: %d kHz\n", clk);
> + else
> + seq_printf(m, "\tMax TMDS clock: %d kHz\n", clk);
> + }
> +
> + bpc = drm_dp_downstream_max_bpc(intel_dp->dpcd,
> + intel_dp->downstream_ports);
> +
> + if (bpc > 0)
> + seq_printf(m, "\tMax bpc: %d\n", bpc);
> + }
> +}
> +
> static void intel_dp_info(struct seq_file *m,
> struct intel_connector *intel_connector)
> {
> struct intel_encoder *intel_encoder = intel_connector->encoder;
> struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
> + bool is_branch_device;
>
> seq_printf(m, "\tDPCD rev: %x\n", intel_dp->dpcd[DP_DPCD_REV]);
> seq_printf(m, "\taudio support: %s\n", yesno(intel_dp->has_audio));
> +
> if (intel_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)
> intel_panel_info(m, &intel_connector->panel);
> +
> + is_branch_device = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> + DP_DWN_STRM_PORT_PRESENT;
> + seq_printf(m, "\tbranch device: %s\n", yesno(is_branch_device));
> +
> + if (is_branch_device)
> + intel_dp_branch_device_info(m, intel_dp);
> }
>
> static void intel_hdmi_info(struct seq_file *m,
> --
> 1.9.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
