Doug,
On 06/14/2016 01:00 AM, Doug Anderson wrote:
Yakir,
On Sat, Jun 11, 2016 at 7:56 PM, Yakir Yang <ykk@xxxxxxxxxxxxxx> wrote:
The Samsung LSN122DL01-C01 is an 12.2" 2560x1600 (WQXGA) TFT-LCD panel
connected using eDP interfaces.
Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v3:
- Correct the size of panel_desc to active area 262mmx164mm (Emil, Stéphane)
Changes in v2: None
drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 2d40a21..17cc973 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1246,6 +1246,28 @@ static const struct panel_desc qd43003c0_40 = {
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
};
+static const struct drm_display_mode samsung_lsn122dl01_c01_mode = {
+ .clock = 271560,
+ .hdisplay = 2560,
+ .hsync_start = 2560 + 48,
+ .hsync_end = 2560 + 48 + 32,
+ .htotal = 2560 + 48 + 32 + 80,
+ .vdisplay = 1600,
+ .vsync_start = 1600 + 2,
+ .vsync_end = 1600 + 2 + 5,
+ .vtotal = 1600 + 2 + 5 + 57,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc samsung_lsn122dl01_c01 = {
+ .modes = &samsung_lsn122dl01_c01_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 262,
+ .height = 164,
Earlier you said that the active area of this panel was:
Display area 262.656(H) X 164.16(V) (12.2”diagonal)
In other panels I looked at the EDID tended to round numbers, not
truncate them. For instance the Starry panel that I sent the patch
for says in the manual "262.7712 (H) x 164.232 (V)" but then the EDID
says "263 x 164".
Ah, got it, done.
Thanks,
- Yakir
That would mean your width should be 263 mm, not 262 mm.
-Doug
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
