The Display Port Auxiliary (DPAUX) channel pads can be shared with an internal I2C controller. Add pinctrl support for these pads so that the I2C controller can request and use these pads. This series has been tested with Thierry's patches for correcting the parent clock for the DPAUX devices [0]. Changes from V1: - Updated dt node names to use '-' instead of '_' per Rob H's feedback. - Updated commit message and dt-binding description for 'i2c-bus' node per Wolfram's feedback. - Note the pinctrl patch to add a helper function for freeing mappings [1] is not included in this latest version of the series as this has already been picked up by Linus W. Changes from initial RFC: - Dropped patches for adding sor-safe clocks to DPAUX in favour of the patches from Thierry [0]. - Split the DPAUX function to enable the DPAUX pads into two functions: one for turning on and one for turning off the pads. - Updated the description for the 'i2c-bus' node based upon Mark R's feedback. - Dropped the second test if the i2c-core when checking for the presence of the 'i2c-bus' node based upon Thierry's feedback. - Removed depedency on CONFIG_PINCTRL in the DPAUX driver in favour of using #ifdef's per Thierry's feedback (note by removing the dependency on CONFIG_PINCTRL I had to use #ifdefs as all the structures, function tables, and functions may not be defined). - Updated SOR power partition device-tree node to include all clocks and resets as described in the Tegra210 TRM. [0] http://marc.info/?l=linux-tegra&m=146667915802019&w=2 [1] http://marc.info/?l=linux-tegra&m=146669759407988&w=2 Jon Hunter (11): soc/tegra: pmc: Initialise resets associated with a power partition drm/tegra: Clean-up if probing DPAUX fails drm/tegra: Add helper functions for setting up DPAUX pads dt-bindings: display: Update Tegra DPAUX documentation drm/tegra: Prepare DPAUX for supporting generic PM domains dt-bindings: i2c: Add support for 'i2c-bus' subnode i2c: core: Add support for 'i2c-bus' subnode dt-bindings: Add bindings for Tegra DPAUX pinctrl driver drm/tegra: Add pinctrl support for DPAUX arm64: tegra: Add SOR power-domain node arm64: tegra: Add DPAUX pinctrl bindings .../display/tegra/nvidia,tegra20-host1x.txt | 12 +- Documentation/devicetree/bindings/i2c/i2c.txt | 8 + .../pinctrl/nvidia,tegra124-dpaux-padctl.txt | 60 ++++++ arch/arm64/boot/dts/nvidia/tegra210.dtsi | 78 +++++++ drivers/gpu/drm/tegra/dpaux.c | 239 +++++++++++++++++---- drivers/i2c/i2c-core.c | 10 +- drivers/soc/tegra/pmc.c | 18 +- 7 files changed, 373 insertions(+), 52 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt -- 2.1.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
