On Tue, Jun 28, 2016 at 04:44:12PM +0100, Jose Abreu wrote: > This patch adds support for the Synopsys HDMI TX Phy in > bridge dw-hdmi. > > The init flow is the same as the Rockchip Phy so we > only need to add one define and one if statement. > > Also, the audio infoframe was fixed to sampling frequency > of 44.1k. With this patch this is now corrected. As > I don't know if this is specific to Synopsys Phy we only > set this if Phy type is DWC_HDMI. I believe the iMX6 uses the Synopsis HDMI 3D Phy. Would it be possible if someone can check whether this is relevant to any of the iMX6 targets too please? -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
