Cc: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
CC: David Airlie <airlied@xxxxxxxx>
CC: Thierry Reding <treding@xxxxxxxxxx>
CC: Thierry Reding <thierry.reding@xxxxxxxxx>
Signed-off-by: Peter Senna Tschudin <peter.senna@xxxxxxxxxxxxx>
---
Changes from V1:
- New commit message
- Removed 3 empty entry points
- Removed memory leak from ge_b850v3_lvds_dp_get_modes()
- Added a lock for mode setting
- Removed a few blank lines
- Changed the order at Makefile and Kconfig
MAINTAINERS | 8 +
drivers/gpu/drm/bridge/Kconfig | 11 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c | 392 +++++++++++++++++++++++++++++
4 files changed, 412 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 2ce5e91..2dd3d7f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5010,6 +5010,14 @@ W: https://linuxtv.org
S: Maintained
F: drivers/media/radio/radio-gemtek*
+GENERAL ELECTRIC B850V3 LVDS/DP++ BRIDGE
+M: Martin Donnelly <martin.donnelly@xxxxxx>
+M: Peter Senna Tschudin <peter.senna@xxxxxxxxxxxxx>
+M: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>
+S: Maintained
+F: drivers/gpu/drm/bridge/ge_b850v3_dp2.c
+F: Documentation/devicetree/bindings/ge/b850v3_dp2_bridge.txt
+
GENERIC GPIO I2C DRIVER
M: Haavard Skinnemoen <hskinnemoen@xxxxxxxxx>
S: Supported
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 8f7423f..93dae5bd 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -32,6 +32,17 @@ config DRM_DW_HDMI_AHB_AUDIO
Designware HDMI block. This is used in conjunction with
the i.MX6 HDMI driver.
+config DRM_GE_B850V3_LVDS_DP
+ tristate "GE B850v3 LVDS to DP++ display bridge"
+ depends on OF
+ select DRM_KMS_HELPER
+ select DRM_PANEL
+ ---help---
+ This is a driver for the display bridge of
+ GE B850v3 that convert dual channel LVDS
+ to DP++. This is used with the i.MX6 imx-ldb
+ driver.
+
config DRM_NXP_PTN3460
tristate "NXP PTN3460 DP/LVDS bridge"
depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 96b13b3..47ea6c1 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -3,6 +3,7 @@ ccflags-y := -Iinclude/drm
obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
+obj-$(CONFIG_DRM_GE_B850V3_LVDS_DP) += ge_b850v3_lvds_dp.o
obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
diff --git a/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c b/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c
new file mode 100644
index 0000000..c73cd77
--- /dev/null
+++ b/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c
@@ -0,0 +1,392 @@
+/*
+ * Driver for GE B850v3 DP display bridge
+
+ * Copyright (c) 2016, Collabora Ltd.
+ * Copyright (c) 2016, General Electric Company
+
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+ * This driver creates a drm_bridge and a drm_connector for the LVDS to DP++
+ * display bridge of the GE B850v3. There are two physical bridges on the video
+ * signal pipeline: a STDP4028(LVDS to DP) and a STDP2690(DP to DP++). However
+ * the physical bridges are automatically configured by the input video signal,
+ * and the driver has no access to the video processing pipeline. The driver is
+ * only needed to read EDID from the STDP2690 and to handle HPD events from the
+ * STDP4028. The driver communicates with both bridges over i2c. The video
+ * signal pipeline is as follows:
+ *
+ * Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+
+ *
+ */
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "drm_edid.h"
+#include "drmP.h"
+
+#define EDID_EXT_BLOCK_CNT 0x7E
+
+#define STDP4028_IRQ_OUT_CONF_REG 0x02
+#define STDP4028_DPTX_IRQ_EN_REG 0x3C
+#define STDP4028_DPTX_IRQ_STS_REG 0x3D
+#define STDP4028_DPTX_STS_REG 0x3E
+
+#define STDP4028_DPTX_DP_IRQ_EN 0x1000
+
+#define STDP4028_DPTX_HOTPLUG_IRQ_EN 0x0400
+#define STDP4028_DPTX_LINK_CH_IRQ_EN 0x2000
+#define STDP4028_DPTX_IRQ_CONFIG \
+ (STDP4028_DPTX_LINK_CH_IRQ_EN | STDP4028_DPTX_HOTPLUG_IRQ_EN)
+
+#define STDP4028_DPTX_HOTPLUG_STS 0x0200
+#define STDP4028_DPTX_LINK_STS 0x1000
+#define STDP4028_CON_STATE_CONNECTED \
+ (STDP4028_DPTX_HOTPLUG_STS | STDP4028_DPTX_LINK_STS)
+
+#define STDP4028_DPTX_HOTPLUG_CH_STS 0x0400
+#define STDP4028_DPTX_LINK_CH_STS 0x2000
+#define STDP4028_DPTX_IRQ_CLEAR \
+ (STDP4028_DPTX_LINK_CH_STS | STDP4028_DPTX_HOTPLUG_CH_STS)
+
+struct ge_b850v3_lvds_dp {
+ struct drm_connector connector;
+ struct drm_bridge bridge;
+ struct i2c_client *ge_b850v3_lvds_dp_i2c;
+ struct i2c_client *edid_i2c;
+ struct edid *edid;
+ struct mutex lock;
+};
+
+static inline struct ge_b850v3_lvds_dp *
+ bridge_to_ge_b850v3_lvds_dp(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct ge_b850v3_lvds_dp, bridge);
+}
+
+static inline struct ge_b850v3_lvds_dp *
+ connector_to_ge_b850v3_lvds_dp(struct drm_connector *connector)
+{
+ return container_of(connector, struct ge_b850v3_lvds_dp, connector);
+}
+
+static void ge_b850v3_lvds_dp_enable(struct drm_bridge *bridge)
+{
+}
+
+static void ge_b850v3_lvds_dp_disable(struct drm_bridge *bridge)
+{
+}
+
+u8 *stdp2690_get_edid(struct i2c_client *client)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ unsigned char start = 0x00;
+ unsigned int total_size;
+ u8 *block = kmalloc(EDID_LENGTH, GFP_KERNEL);
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = &start,
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = EDID_LENGTH,
+ .buf = block,
+ }
+ };
+
+ if (!block)
+ return NULL;
+
+ if (i2c_transfer(adapter, msgs, 2) != 2) {
+ DRM_ERROR("Unable to read EDID.\n");
+ goto err;
+ }
+
+ if (!drm_edid_block_valid(block, 0, false, NULL)) {
+ DRM_ERROR("Invalid EDID block\n");
+ goto err;
+ }
+
+ total_size = (block[EDID_EXT_BLOCK_CNT] + 1) * EDID_LENGTH;
+ if (total_size > EDID_LENGTH) {
+ kfree(block);
+ block = kmalloc(total_size, GFP_KERNEL);
+ if (!block)
+ return NULL;
+
+ /* Yes, read the entire buffer, and do not skip the first
+ * EDID_LENGTH bytes.
+ */
+ start = 0x00;
+ msgs[1].len = total_size;
+ msgs[1].buf = block;
+
+ if (i2c_transfer(adapter, msgs, 2) != 2) {
+ DRM_ERROR("Unable to read EDID extension blocks.\n");
+ goto err;
+ }
+ }
+
+ return block;
+
+err:
+ kfree(block);
+ return NULL;
+}
+
+static int ge_b850v3_lvds_dp_get_modes(struct drm_connector *connector)
+{
+ struct ge_b850v3_lvds_dp *ptn_bridge;
+ struct i2c_client *client;
+ int num_modes = 0;
+
+ ptn_bridge = connector_to_ge_b850v3_lvds_dp(connector);
+ client = ptn_bridge->edid_i2c;
+
+ mutex_lock(&ptn_bridge->lock);
+
+ kfree(ptn_bridge->edid);
+ ptn_bridge->edid = (struct edid *) stdp2690_get_edid(client);
+
+ if (ptn_bridge->edid) {
+ drm_mode_connector_update_edid_property(connector,
+ ptn_bridge->edid);
+ num_modes = drm_add_edid_modes(connector, ptn_bridge->edid);
+ }
+
+ mutex_unlock(&ptn_bridge->lock);
+
+ return num_modes;
+}
+
+static struct drm_encoder
+*ge_b850v3_lvds_dp_best_encoder(struct drm_connector *connector)
+{
+ struct ge_b850v3_lvds_dp *ptn_bridge =
+ connector_to_ge_b850v3_lvds_dp(connector);
+
+ return ptn_bridge->bridge.encoder;
+}
+
+static const struct
+drm_connector_helper_funcs ge_b850v3_lvds_dp_connector_helper_funcs = {
+ .get_modes = ge_b850v3_lvds_dp_get_modes,
+ .best_encoder = ge_b850v3_lvds_dp_best_encoder,
+};
+
+static enum drm_connector_status ge_b850v3_lvds_dp_detect(
+ struct drm_connector *connector, bool force)
+{
+ struct ge_b850v3_lvds_dp *ptn_bridge =
+ connector_to_ge_b850v3_lvds_dp(connector);
+ struct i2c_client *ge_b850v3_lvds_dp_i2c =
+ ptn_bridge->ge_b850v3_lvds_dp_i2c;
+ s32 link_state;
+
+ link_state = i2c_smbus_read_word_data(ge_b850v3_lvds_dp_i2c,
+ STDP4028_DPTX_STS_REG);
+
+ if (link_state == STDP4028_CON_STATE_CONNECTED)
+ return connector_status_connected;
+
+ if (link_state == 0)
+ return connector_status_disconnected;
+
+ return connector_status_unknown;
+}
+
+static void ge_b850v3_lvds_dp_connector_destroy(struct drm_connector *connector)
+{
+ drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs ge_b850v3_lvds_dp_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = ge_b850v3_lvds_dp_detect,
+ .destroy = ge_b850v3_lvds_dp_connector_destroy,
+};
+
+static irqreturn_t ge_b850v3_lvds_dp_irq_handler(int irq, void *dev_id)
+{
+ struct ge_b850v3_lvds_dp *ptn_bridge = dev_id;
+ struct i2c_client *ge_b850v3_lvds_dp_i2c
+ = ptn_bridge->ge_b850v3_lvds_dp_i2c;
+
+ mutex_lock(&ptn_bridge->lock);
+
+ i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
+ STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR);
+
+ mutex_unlock(&ptn_bridge->lock);
+
+ if (ptn_bridge->connector.dev)
+ drm_kms_helper_hotplug_event(ptn_bridge->connector.dev);
+
+ return IRQ_HANDLED;
+}
+
+static int ge_b850v3_lvds_dp_attach(struct drm_bridge *bridge)
+{
+ struct ge_b850v3_lvds_dp *ptn_bridge
+ = bridge_to_ge_b850v3_lvds_dp(bridge);
+ struct drm_connector *connector = &ptn_bridge->connector;
+ struct i2c_client *ge_b850v3_lvds_dp_i2c
+ = ptn_bridge->ge_b850v3_lvds_dp_i2c;
+ int ret;
+
+ if (!bridge->encoder) {
+ DRM_ERROR("Parent encoder object not found");
+ return -ENODEV;
+ }
+
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+ drm_connector_helper_add(connector,
+ &ge_b850v3_lvds_dp_connector_helper_funcs);
+
+ ret = drm_connector_init(bridge->dev, connector,
+ &ge_b850v3_lvds_dp_connector_funcs,
+ DRM_MODE_CONNECTOR_DisplayPort);
+ if (ret) {
+ DRM_ERROR("Failed to initialize connector with drm\n");
+ return ret;
+ }
+
+ ret = drm_mode_connector_attach_encoder(connector, bridge->encoder);
+ if (ret)
+ return ret;
+
+ drm_bridge_enable(bridge);
+ if (ge_b850v3_lvds_dp_i2c->irq) {
+ drm_helper_hpd_irq_event(connector->dev);
+
+ ret = devm_request_threaded_irq(&ge_b850v3_lvds_dp_i2c->dev,
+ ge_b850v3_lvds_dp_i2c->irq, NULL,
+ ge_b850v3_lvds_dp_irq_handler,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "ge-b850v3-lvds-dp", ptn_bridge);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct drm_bridge_funcs ge_b850v3_lvds_dp_funcs = {
+ .enable = ge_b850v3_lvds_dp_enable,
+ .disable = ge_b850v3_lvds_dp_disable,
+ .attach = ge_b850v3_lvds_dp_attach,
+};
+
+static int ge_b850v3_lvds_dp_probe(struct i2c_client *ge_b850v3_lvds_dp_i2c,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &ge_b850v3_lvds_dp_i2c->dev;
+ struct ge_b850v3_lvds_dp *ptn_bridge;
+ int ret;
+ u32 edid_i2c_reg;
+
+ ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
+ if (!ptn_bridge)
+ return -ENOMEM;
+
+ mutex_init(&ptn_bridge->lock);
+
+ ptn_bridge->ge_b850v3_lvds_dp_i2c = ge_b850v3_lvds_dp_i2c;
+ ptn_bridge->bridge.driver_private = ptn_bridge;
+ i2c_set_clientdata(ge_b850v3_lvds_dp_i2c, ptn_bridge);
+
+ ret = of_property_read_u32(dev->of_node, "edid-reg", &edid_i2c_reg);
+ if (ret) {
+ dev_err(dev, "edid-reg not specified, aborting...\n");
+ return -ENODEV;
+ }
+
+ ptn_bridge->edid_i2c = devm_kzalloc(dev,
+ sizeof(struct i2c_client), GFP_KERNEL);
+
+ if (!ptn_bridge->edid_i2c)
+ return -ENOMEM;
+
+ memcpy(ptn_bridge->edid_i2c, ge_b850v3_lvds_dp_i2c,
+ sizeof(struct i2c_client));
+
+ ptn_bridge->edid_i2c->addr = (unsigned short) edid_i2c_reg;
+
+ /* Configures the bridge to re-enable interrupts after each ack */
+ i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
+ STDP4028_IRQ_OUT_CONF_REG, STDP4028_DPTX_DP_IRQ_EN);
+ i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
+ STDP4028_DPTX_IRQ_EN_REG, STDP4028_DPTX_IRQ_CONFIG);
+
+ /* Clear pending interrupts since power up. */
+ i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
+ STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR);
+
+ ptn_bridge->bridge.funcs = &ge_b850v3_lvds_dp_funcs;
+ ptn_bridge->bridge.of_node = dev->of_node;
+ ret = drm_bridge_add(&ptn_bridge->bridge);
+ if (ret) {
+ DRM_ERROR("Failed to add bridge\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ge_b850v3_lvds_dp_remove(struct i2c_client *ge_b850v3_lvds_dp_i2c)
+{
+ struct ge_b850v3_lvds_dp *ptn_bridge =
+ i2c_get_clientdata(ge_b850v3_lvds_dp_i2c);
+
+ drm_bridge_remove(&ptn_bridge->bridge);
+
+ return 0;
+}
+
+static const struct i2c_device_id ge_b850v3_lvds_dp_i2c_table[] = {
+ {"b850v3-lvds-dp", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, ge_b850v3_lvds_dp_i2c_table);
+
+static const struct of_device_id ge_b850v3_lvds_dp_match[] = {
+ { .compatible = "ge,b850v3-lvds-dp" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ge_b850v3_lvds_dp_match);
+
+static struct i2c_driver ge_b850v3_lvds_dp_driver = {
+ .id_table = ge_b850v3_lvds_dp_i2c_table,
+ .probe = ge_b850v3_lvds_dp_probe,
+ .remove = ge_b850v3_lvds_dp_remove,
+ .driver = {
+ .name = "ge,b850v3-lvds-dp",
+ .of_match_table = ge_b850v3_lvds_dp_match,
+ },
+};
+module_i2c_driver(ge_b850v3_lvds_dp_driver);
+
+MODULE_AUTHOR("Peter Senna Tschudin <peter.senna@xxxxxxxxxxxxx>");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("GE LVDS to DP++ bridge)");
+MODULE_LICENSE("GPL v2");
