Em Fri, 29 Apr 2016 15:52:24 +0200
Hans Verkuil <hverkuil@xxxxxxxxx> escreveu:
> From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>
> Add CEC support to the adv7604 driver.
>
> Signed-off-by: Hans Verkuil <hansverk@xxxxxxxxx>
> [k.debski@xxxxxxxxxxx: Merged changes from CEC Updates commit by Hans Verkuil]
> [k.debski@xxxxxxxxxxx: add missing methods cec/io_write_and_or]
> [k.debski@xxxxxxxxxxx: change adv7604 to adv76xx in added functions]
> [hansverk@xxxxxxxxx: use _clr_set instead of _and_or]
> ---
> drivers/media/i2c/Kconfig | 9 ++
> drivers/media/i2c/adv7604.c | 332 +++++++++++++++++++++++++++++++++++++++-----
> 2 files changed, 305 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 993dc50..cba1fc7 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -209,6 +209,7 @@ config VIDEO_ADV7604
> depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
> depends on GPIOLIB || COMPILE_TEST
> select HDMI
> + select MEDIA_CEC_EDID
Same note for all CEC drivers: don't do that! CEC is in staging. We
should not have any code outside staging depending or selecting CEC.
Instead, put all CEC dependent code inside #ifdefs.
> ---help---
> Support for the Analog Devices ADV7604 video decoder.
>
> @@ -218,6 +219,14 @@ config VIDEO_ADV7604
> To compile this driver as a module, choose M here: the
> module will be called adv7604.
>
> +config VIDEO_ADV7604_CEC
> + bool "Enable Analog Devices ADV7604 CEC support"
> + depends on VIDEO_ADV7604 && MEDIA_CEC
> + default y
Remove "default y". CEC is experimental. Users should explicitly
agree adding experimental code that depends on staging stuff.
> + ---help---
> + When selected the adv7604 will support the optional
> + HDMI CEC feature.
Please add a notice that CEC is an experimental feature under
staging and may be changed or even removed in the future.
We don't want any application to use it yet, as we're still
experimenting with it.
For the rest of the code below, and for patches 10-13: all the above
applies to them.
> +
> config VIDEO_ADV7842
> tristate "Analog Devices ADV7842 decoder"
> depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
> diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
> index beb2841..f462585 100644
> --- a/drivers/media/i2c/adv7604.c
> +++ b/drivers/media/i2c/adv7604.c
> @@ -40,6 +40,7 @@
> #include <linux/regmap.h>
>
> #include <media/i2c/adv7604.h>
> +#include <media/cec.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-device.h>
> #include <media/v4l2-event.h>
> @@ -80,6 +81,8 @@ MODULE_LICENSE("GPL");
>
> #define ADV76XX_OP_SWAP_CB_CR (1 << 0)
>
> +#define ADV76XX_MAX_ADDRS (3)
> +
> enum adv76xx_type {
> ADV7604,
> ADV7611,
> @@ -184,6 +187,12 @@ struct adv76xx_state {
> u16 spa_port_a[2];
> struct v4l2_fract aspect_ratio;
> u32 rgb_quantization_range;
> +
> + struct cec_adapter *cec_adap;
> + u8 cec_addr[ADV76XX_MAX_ADDRS];
> + u8 cec_valid_addrs;
> + bool cec_enabled_adap;
> +
> struct workqueue_struct *work_queues;
> struct delayed_work delayed_work_enable_hotplug;
> bool restart_stdi_once;
> @@ -381,7 +390,8 @@ static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val)
> return regmap_write(state->regmap[ADV76XX_PAGE_IO], reg, val);
> }
>
> -static inline int io_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
> +static inline int io_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask,
> + u8 val)
> {
> return io_write(sd, reg, (io_read(sd, reg) & ~mask) | val);
> }
> @@ -414,6 +424,12 @@ static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
> return regmap_write(state->regmap[ADV76XX_PAGE_CEC], reg, val);
> }
>
> +static inline int cec_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask,
> + u8 val)
> +{
> + return cec_write(sd, reg, (cec_read(sd, reg) & ~mask) | val);
> +}
> +
> static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg)
> {
> struct adv76xx_state *state = to_state(sd);
> @@ -872,9 +888,9 @@ static int adv76xx_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd)
> {
> struct adv76xx_state *state = to_state(sd);
> const struct adv76xx_chip_info *info = state->info;
> + u16 cable_det = info->read_cable_det(sd);
>
> - return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl,
> - info->read_cable_det(sd));
> + return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, cable_det);
> }
>
> static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd,
> @@ -1900,6 +1916,210 @@ static int adv76xx_set_format(struct v4l2_subdev *sd,
> return 0;
> }
>
> +#if IS_ENABLED(CONFIG_VIDEO_ADV7604_CEC)
> +static void adv76xx_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status)
> +{
> + struct adv76xx_state *state = to_state(sd);
> +
> + if ((cec_read(sd, 0x11) & 0x01) == 0) {
> + v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__);
> + return;
> + }
> +
> + if (tx_raw_status & 0x02) {
> + v4l2_dbg(1, debug, sd, "%s: tx raw: arbitration lost\n",
> + __func__);
> + cec_transmit_done(state->cec_adap, CEC_TX_STATUS_ARB_LOST,
> + 1, 0, 0, 0);
> + }
> + if (tx_raw_status & 0x04) {
> + u8 status;
> + u8 nack_cnt;
> + u8 low_drive_cnt;
> +
> + v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__);
> + /*
> + * We set this status bit since this hardware performs
> + * retransmissions.
> + */
> + status = CEC_TX_STATUS_MAX_RETRIES;
> + nack_cnt = cec_read(sd, 0x14) & 0xf;
> + if (nack_cnt)
> + status |= CEC_TX_STATUS_NACK;
> + low_drive_cnt = cec_read(sd, 0x14) >> 4;
> + if (low_drive_cnt)
> + status |= CEC_TX_STATUS_LOW_DRIVE;
> + cec_transmit_done(state->cec_adap, status,
> + 0, nack_cnt, low_drive_cnt, 0);
> + return;
> + }
> + if (tx_raw_status & 0x01) {
> + v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__);
> + cec_transmit_done(state->cec_adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
> + return;
> + }
> +}
> +
> +static void adv76xx_cec_isr(struct v4l2_subdev *sd, bool *handled)
> +{
> + struct adv76xx_state *state = to_state(sd);
> + u8 cec_irq;
> +
> + /* cec controller */
> + cec_irq = io_read(sd, 0x4d) & 0x0f;
> + if (!cec_irq)
> + return;
> +
> + v4l2_dbg(1, debug, sd, "%s: cec: irq 0x%x\n", __func__, cec_irq);
> + adv76xx_cec_tx_raw_status(sd, cec_irq);
> + if (cec_irq & 0x08) {
> + struct cec_msg msg;
> +
> + msg.len = cec_read(sd, 0x25) & 0x1f;
> + if (msg.len > 16)
> + msg.len = 16;
> +
> + if (msg.len) {
> + u8 i;
> +
> + for (i = 0; i < msg.len; i++)
> + msg.msg[i] = cec_read(sd, i + 0x15);
> + cec_write(sd, 0x26, 0x01); /* re-enable rx */
> + cec_received_msg(state->cec_adap, &msg);
> + }
> + }
> +
> + /* note: the bit order is swapped between 0x4d and 0x4e */
> + cec_irq = ((cec_irq & 0x08) >> 3) | ((cec_irq & 0x04) >> 1) |
> + ((cec_irq & 0x02) << 1) | ((cec_irq & 0x01) << 3);
> + io_write(sd, 0x4e, cec_irq);
> +
> + if (handled)
> + *handled = true;
> +}
> +
> +static int adv76xx_cec_adap_enable(struct cec_adapter *adap, bool enable)
> +{
> + struct adv76xx_state *state = adap->priv;
> + struct v4l2_subdev *sd = &state->sd;
> +
> + if (!state->cec_enabled_adap && enable) {
> + cec_write_clr_set(sd, 0x2a, 0x01, 0x01); /* power up cec */
> + cec_write(sd, 0x2c, 0x01); /* cec soft reset */
> + cec_write_clr_set(sd, 0x11, 0x01, 0); /* initially disable tx */
> + /* enabled irqs: */
> + /* tx: ready */
> + /* tx: arbitration lost */
> + /* tx: retry timeout */
> + /* rx: ready */
> + io_write_clr_set(sd, 0x50, 0x0f, 0x0f);
> + cec_write(sd, 0x26, 0x01); /* enable rx */
> + } else if (state->cec_enabled_adap && !enable) {
> + /* disable cec interrupts */
> + io_write_clr_set(sd, 0x50, 0x0f, 0x00);
> + /* disable address mask 1-3 */
> + cec_write_clr_set(sd, 0x27, 0x70, 0x00);
> + /* power down cec section */
> + cec_write_clr_set(sd, 0x2a, 0x01, 0x00);
> + state->cec_valid_addrs = 0;
> + }
> + state->cec_enabled_adap = enable;
> + adv76xx_s_detect_tx_5v_ctrl(sd);
> + return 0;
> +}
> +
> +static int adv76xx_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
> +{
> + struct adv76xx_state *state = adap->priv;
> + struct v4l2_subdev *sd = &state->sd;
> + unsigned i, free_idx = ADV76XX_MAX_ADDRS;
> +
> + if (!state->cec_enabled_adap)
> + return addr == CEC_LOG_ADDR_INVALID ? 0 : -EIO;
> +
> + if (addr == CEC_LOG_ADDR_INVALID) {
> + cec_write_clr_set(sd, 0x27, 0x70, 0);
> + state->cec_valid_addrs = 0;
> + return 0;
> + }
> +
> + for (i = 0; i < ADV76XX_MAX_ADDRS; i++) {
> + bool is_valid = state->cec_valid_addrs & (1 << i);
> +
> + if (free_idx == ADV76XX_MAX_ADDRS && !is_valid)
> + free_idx = i;
> + if (is_valid && state->cec_addr[i] == addr)
> + return 0;
> + }
> + if (i == ADV76XX_MAX_ADDRS) {
> + i = free_idx;
> + if (i == ADV76XX_MAX_ADDRS)
> + return -ENXIO;
> + }
> + state->cec_addr[i] = addr;
> + state->cec_valid_addrs |= 1 << i;
> +
> + switch (i) {
> + case 0:
> + /* enable address mask 0 */
> + cec_write_clr_set(sd, 0x27, 0x10, 0x10);
> + /* set address for mask 0 */
> + cec_write_clr_set(sd, 0x28, 0x0f, addr);
> + break;
> + case 1:
> + /* enable address mask 1 */
> + cec_write_clr_set(sd, 0x27, 0x20, 0x20);
> + /* set address for mask 1 */
> + cec_write_clr_set(sd, 0x28, 0xf0, addr << 4);
> + break;
> + case 2:
> + /* enable address mask 2 */
> + cec_write_clr_set(sd, 0x27, 0x40, 0x40);
> + /* set address for mask 1 */
> + cec_write_clr_set(sd, 0x29, 0x0f, addr);
> + break;
> + }
> + return 0;
> +}
> +
> +static int adv76xx_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
> + u32 signal_free_time, struct cec_msg *msg)
> +{
> + struct adv76xx_state *state = adap->priv;
> + struct v4l2_subdev *sd = &state->sd;
> + u8 len = msg->len;
> + unsigned i;
> +
> + /*
> + * The number of retries is the number of attempts - 1, but retry
> + * at least once. It's not clear if a value of 0 is allowed, so
> + * let's do at least one retry.
> + */
> + cec_write_clr_set(sd, 0x12, 0x70, max(1, attempts - 1) << 4);
> +
> + if (len > 16) {
> + v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len);
> + return -EINVAL;
> + }
> +
> + /* write data */
> + for (i = 0; i < len; i++)
> + cec_write(sd, i, msg->msg[i]);
> +
> + /* set length (data + header) */
> + cec_write(sd, 0x10, len);
> + /* start transmit, enable tx */
> + cec_write(sd, 0x11, 0x01);
> + return 0;
> +}
> +
> +static const struct cec_adap_ops adv76xx_cec_adap_ops = {
> + .adap_enable = adv76xx_cec_adap_enable,
> + .adap_log_addr = adv76xx_cec_adap_log_addr,
> + .adap_transmit = adv76xx_cec_adap_transmit,
> +};
> +#endif
> +
> static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
> {
> struct adv76xx_state *state = to_state(sd);
> @@ -1945,6 +2165,11 @@ static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
> *handled = true;
> }
>
> +#if IS_ENABLED(CONFIG_VIDEO_ADV7604_CEC)
> + /* cec */
> + adv76xx_cec_isr(sd, handled);
> +#endif
> +
> /* tx 5v detect */
> tx_5v = irq_reg_0x70 & info->cable_det_mask;
> if (tx_5v) {
> @@ -1994,39 +2219,12 @@ static int adv76xx_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
> return 0;
> }
>
> -static int get_edid_spa_location(const u8 *edid)
> -{
> - u8 d;
> -
> - if ((edid[0x7e] != 1) ||
> - (edid[0x80] != 0x02) ||
> - (edid[0x81] != 0x03)) {
> - return -1;
> - }
> -
> - /* search Vendor Specific Data Block (tag 3) */
> - d = edid[0x82] & 0x7f;
> - if (d > 4) {
> - int i = 0x84;
> - int end = 0x80 + d;
> -
> - do {
> - u8 tag = edid[i] >> 5;
> - u8 len = edid[i] & 0x1f;
> -
> - if ((tag == 3) && (len >= 5))
> - return i + 4;
> - i += len + 1;
> - } while (i < end);
> - }
> - return -1;
> -}
Very likely, you can't drop the above, as it won't compile if !CEC.
While CEC is under staging, no code here should use a function
defined there. Even afterwards, CEC should be an optional feature.
So, IMHO, it is better to move the EDID parsing code out of the
CEC core, putting them elsewhere.
> -
> static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
> {
> struct adv76xx_state *state = to_state(sd);
> const struct adv76xx_chip_info *info = state->info;
> - int spa_loc;
> + unsigned spa_loc;
> + u16 pa;
> int err;
> int i;
>
> @@ -2057,6 +2255,10 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
> edid->blocks = 2;
> return -E2BIG;
> }
> + pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, &spa_loc);
> + err = cec_phys_addr_validate(pa, &pa, NULL);
> + if (err)
> + return err;
>
> v4l2_dbg(2, debug, sd, "%s: write EDID pad %d, edid.present = 0x%x\n",
> __func__, edid->pad, state->edid.present);
> @@ -2066,9 +2268,12 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
> adv76xx_set_hpd(state, 0);
> rep_write_clr_set(sd, info->edid_enable_reg, 0x0f, 0x00);
>
> - spa_loc = get_edid_spa_location(edid->edid);
> - if (spa_loc < 0)
> - spa_loc = 0xc0; /* Default value [REF_02, p. 116] */
> + /*
> + * Return an error if no location of the source physical address
> + * was found.
> + */
> + if (spa_loc == 0)
> + return -EINVAL;
>
> switch (edid->pad) {
> case ADV76XX_PAD_HDMI_PORT_A:
> @@ -2128,6 +2333,7 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
> v4l2_err(sd, "error enabling edid (0x%x)\n", state->edid.present);
> return -EIO;
> }
> + cec_s_phys_addr(state->cec_adap, pa, false);
>
> /* enable hotplug after 100 ms */
> queue_delayed_work(state->work_queues,
> @@ -2252,8 +2458,19 @@ static int adv76xx_log_status(struct v4l2_subdev *sd)
> ((edid_enabled & 0x02) ? "Yes" : "No"),
> ((edid_enabled & 0x04) ? "Yes" : "No"),
> ((edid_enabled & 0x08) ? "Yes" : "No"));
> - v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ?
> + v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ?
> "enabled" : "disabled");
> + if (state->cec_enabled_adap) {
> + int i;
> +
> + for (i = 0; i < ADV76XX_MAX_ADDRS; i++) {
> + bool is_valid = state->cec_valid_addrs & (1 << i);
> +
> + if (is_valid)
> + v4l2_info(sd, "CEC Logical Address: 0x%x\n",
> + state->cec_addr[i]);
> + }
> + }
>
> v4l2_info(sd, "-----Signal status-----\n");
> cable_det = info->read_cable_det(sd);
> @@ -2363,6 +2580,24 @@ static int adv76xx_subscribe_event(struct v4l2_subdev *sd,
> }
> }
>
> +static int adv76xx_registered(struct v4l2_subdev *sd)
> +{
> + struct adv76xx_state *state = to_state(sd);
> + int err;
> +
> + err = cec_register_adapter(state->cec_adap);
> + if (err)
> + cec_delete_adapter(state->cec_adap);
> + return err;
> +}
> +
> +static void adv76xx_unregistered(struct v4l2_subdev *sd)
> +{
> + struct adv76xx_state *state = to_state(sd);
> +
> + cec_unregister_adapter(state->cec_adap);
> +}
> +
> /* ----------------------------------------------------------------------- */
>
> static const struct v4l2_ctrl_ops adv76xx_ctrl_ops = {
> @@ -2406,6 +2641,11 @@ static const struct v4l2_subdev_ops adv76xx_ops = {
> .pad = &adv76xx_pad_ops,
> };
>
> +static const struct v4l2_subdev_internal_ops adv76xx_int_ops = {
> + .registered = adv76xx_registered,
> + .unregistered = adv76xx_unregistered,
> +};
> +
> /* -------------------------- custom ctrls ---------------------------------- */
>
> static const struct v4l2_ctrl_config adv7604_ctrl_analog_sampling_phase = {
> @@ -3069,6 +3309,7 @@ static int adv76xx_probe(struct i2c_client *client,
> id->name, i2c_adapter_id(client->adapter),
> client->addr);
> sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> + sd->internal_ops = &adv76xx_int_ops;
>
> /* Configure IO Regmap region */
> err = configure_regmap(state, ADV76XX_PAGE_IO);
> @@ -3212,6 +3453,18 @@ static int adv76xx_probe(struct i2c_client *client,
> err = adv76xx_core_init(sd);
> if (err)
> goto err_entity;
> +
> +#if IS_ENABLED(CONFIG_VIDEO_ADV7604_CEC)
> + state->cec_adap = cec_allocate_adapter(&adv76xx_cec_adap_ops,
> + state, dev_name(&client->dev),
> + CEC_CAP_TRANSMIT | CEC_CAP_LOG_ADDRS |
> + CEC_CAP_PASSTHROUGH | CEC_CAP_RC, ADV76XX_MAX_ADDRS,
> + &client->dev);
> + err = PTR_ERR_OR_ZERO(state->cec_adap);
> + if (err)
> + goto err_entity;
> +#endif
> +
> v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
> client->addr << 1, client->adapter->name);
>
> @@ -3240,6 +3493,13 @@ static int adv76xx_remove(struct i2c_client *client)
> struct v4l2_subdev *sd = i2c_get_clientdata(client);
> struct adv76xx_state *state = to_state(sd);
>
> + /* disable interrupts */
> + io_write(sd, 0x40, 0);
> + io_write(sd, 0x41, 0);
> + io_write(sd, 0x46, 0);
> + io_write(sd, 0x6e, 0);
> + io_write(sd, 0x73, 0);
> +
> cancel_delayed_work(&state->delayed_work_enable_hotplug);
> destroy_workqueue(state->work_queues);
> v4l2_async_unregister_subdev(sd);
Thanks,
Mauro
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
