MDP4 and MDP5 vary a bit in terms of device hierarchy and the properties
they require. Rename the binding doc to mdp4.txt and remove MDP5 specific
pieces. A separate document will be created for MDP5
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/msm/mdp.txt | 57 ----------------------
.../devicetree/bindings/display/msm/mdp4.txt | 54 ++++++++++++++++++++
2 files changed, 54 insertions(+), 57 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/msm/mdp.txt
create mode 100644 Documentation/devicetree/bindings/display/msm/mdp4.txt
diff --git a/Documentation/devicetree/bindings/display/msm/mdp.txt b/Documentation/devicetree/bindings/display/msm/mdp.txt
deleted file mode 100644
index ebfe016..0000000
--- a/Documentation/devicetree/bindings/display/msm/mdp.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Qualcomm adreno/snapdragon display controller
-
-Required properties:
-- compatible:
- * "qcom,mdp4" - mdp4
- * "qcom,mdp5" - mdp5
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt signal from the display controller.
-- connectors: array of phandles for output device(s)
-- clocks: device clocks
- See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
- For MDP4:
- * "core_clk"
- * "iface_clk"
- * "bus_clk"
- * "lut_clk"
- * "hdmi_clk"
- * "tv_clk"
- For MDP5:
- * "bus_clk"
- * "iface_clk"
- * "core_clk"
- * "lut_clk" (some MDP5 versions may not need this)
- * "vsync_clk"
-
-Optional properties:
-- gpus: phandle for gpu device
-- clock-names: the following clocks are optional:
- * "lut_clk"
-
-Example:
-
-/ {
- ...
-
- mdp: qcom,mdp@5100000 {
- compatible = "qcom,mdp4";
- reg = <0x05100000 0xf0000>;
- interrupts = <GIC_SPI 75 0>;
- connectors = <&hdmi>;
- gpus = <&gpu>;
- clock-names =
- "core_clk",
- "iface_clk",
- "lut_clk",
- "hdmi_clk",
- "tv_clk";
- clocks =
- <&mmcc MDP_CLK>,
- <&mmcc MDP_AHB_CLK>,
- <&mmcc MDP_AXI_CLK>,
- <&mmcc MDP_LUT_CLK>,
- <&mmcc HDMI_TV_CLK>,
- <&mmcc MDP_TV_CLK>;
- };
-};
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt
new file mode 100644
index 0000000..1de9b17
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdp4.txt
@@ -0,0 +1,54 @@
+Qualcomm adreno/snapdragon MDP4 display controller
+
+Description:
+
+This is the bindings documentation for the MDP4 display controller found in
+SoCs like MSM8960, APQ8064 and MSM8660.
+
+Required properties:
+- compatible:
+ * "qcom,mdp4" - mdp4
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the display controller.
+- connectors: array of phandles for output device(s)
+- clocks: device clocks
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required.
+ * "core_clk"
+ * "iface_clk"
+ * "bus_clk"
+ * "lut_clk"
+ * "hdmi_clk"
+ * "tv_clk"
+
+Optional properties:
+- gpus: phandle for gpu device
+- clock-names: the following clocks are optional:
+ * "lut_clk"
+
+Example:
+
+/ {
+ ...
+
+ mdp: qcom,mdp@5100000 {
+ compatible = "qcom,mdp4";
+ reg = <0x05100000 0xf0000>;
+ interrupts = <GIC_SPI 75 0>;
+ connectors = <&hdmi>;
+ gpus = <&gpu>;
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "lut_clk",
+ "hdmi_clk",
+ "tv_clk";
+ clocks =
+ <&mmcc MDP_CLK>,
+ <&mmcc MDP_AHB_CLK>,
+ <&mmcc MDP_AXI_CLK>,
+ <&mmcc MDP_LUT_CLK>,
+ <&mmcc HDMI_TV_CLK>,
+ <&mmcc MDP_TV_CLK>;
+ };
+};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
