Add basic support for the sii902x RGB -> HDMI bridge.
This driver does not support audio output yet.
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
Tested-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
---
Hi Archit,
I recently learned you were the drm/bridge maintainer, and I realize
you were not in Cc of the previous versions.
Once you have some time, could you review this series, and let me know
what's the procedure to get it merged (send a PR to Dave, or let you
take it into your tree).
Thanks,
Boris
Changes in v6:
- use HDMI_INFOFRAME_SIZE(AVI)
- fix reset_gpio initialization
- reduce the reset time based on Ming feedback
Changes in v5:
- drop the best_encoder() implementation
Changes in v4:
- make reset GPIO optional
- only support attaching to DRM devices supporting atomic updates
Changes in v3:
- fix get_modes() implementation to avoid turning the screen in power
save mode
- rename the driver (sil902x -> sii902x)
Changes in v2:
- fix errors reported by the kbuild robot
fixup! drm: bridge: Add sii902x driver
---
drivers/gpu/drm/bridge/Kconfig | 8 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/sii902x.c | 459 +++++++++++++++++++++++++++++++++++++++
3 files changed, 468 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/sii902x.c
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 8f7423f..a1419214 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -50,6 +50,14 @@ config DRM_PARADE_PS8622
---help---
Parade eDP-LVDS bridge chip driver.
+config DRM_SII902X
+ tristate "Silicon Image sii902x RGB/HDMI bridge"
+ depends on OF
+ select DRM_KMS_HELPER
+ select REGMAP_I2C
+ ---help---
+ Silicon Image sii902x bridge chip driver.
+
source "drivers/gpu/drm/bridge/analogix/Kconfig"
endmenu
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 96b13b3..bfec9f8 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -5,4 +5,5 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
+obj-$(CONFIG_DRM_SII902X) += sii902x.o
obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
new file mode 100644
index 0000000..d46bf98
--- /dev/null
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -0,0 +1,459 @@
+/*
+ * Copyright (C) 2014 Atmel
+ * Bo Shen <voice.shen@xxxxxxxxx>
+ *
+ * Authors: Bo Shen <voice.shen@xxxxxxxxx>
+ * Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
+ * Wu, Songjun <Songjun.Wu@xxxxxxxxx>
+ *
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/component.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_encoder_slave.h>
+
+#define SIL902X_TPI_VIDEO_DATA 0x0
+
+#define SIL902X_TPI_PIXEL_REPETITION 0x8
+#define SIL902X_TPI_AVI_PIXEL_REP_BUS_24BIT BIT(5)
+#define SIL902X_TPI_AVI_PIXEL_REP_RISING_EDGE BIT(4)
+#define SIL902X_TPI_AVI_PIXEL_REP_4X 3
+#define SIL902X_TPI_AVI_PIXEL_REP_2X 1
+#define SIL902X_TPI_AVI_PIXEL_REP_NONE 0
+#define SIL902X_TPI_CLK_RATIO_HALF (0 << 6)
+#define SIL902X_TPI_CLK_RATIO_1X (1 << 6)
+#define SIL902X_TPI_CLK_RATIO_2X (2 << 6)
+#define SIL902X_TPI_CLK_RATIO_4X (3 << 6)
+
+#define SIL902X_TPI_AVI_IN_FORMAT 0x9
+#define SIL902X_TPI_AVI_INPUT_BITMODE_12BIT BIT(7)
+#define SIL902X_TPI_AVI_INPUT_DITHER BIT(6)
+#define SIL902X_TPI_AVI_INPUT_RANGE_LIMITED (2 << 2)
+#define SIL902X_TPI_AVI_INPUT_RANGE_FULL (1 << 2)
+#define SIL902X_TPI_AVI_INPUT_RANGE_AUTO (0 << 2)
+#define SIL902X_TPI_AVI_INPUT_COLORSPACE_BLACK (3 << 0)
+#define SIL902X_TPI_AVI_INPUT_COLORSPACE_YUV422 (2 << 0)
+#define SIL902X_TPI_AVI_INPUT_COLORSPACE_YUV444 (1 << 0)
+#define SIL902X_TPI_AVI_INPUT_COLORSPACE_RGB (0 << 0)
+
+#define SIL902X_TPI_AVI_INFOFRAME 0x0c
+
+#define SIL902X_SYS_CTRL_DATA 0x1a
+#define SIL902X_SYS_CTRL_PWR_DWN BIT(4)
+#define SIL902X_SYS_CTRL_AV_MUTE BIT(3)
+#define SIL902X_SYS_CTRL_DDC_BUS_REQ BIT(2)
+#define SIL902X_SYS_CTRL_DDC_BUS_GRTD BIT(1)
+#define SIL902X_SYS_CTRL_OUTPUT_MODE BIT(0)
+#define SIL902X_SYS_CTRL_OUTPUT_HDMI 1
+#define SIL902X_SYS_CTRL_OUTPUT_DVI 0
+
+#define SIL902X_REG_CHIPID(n) (0x1b + (n))
+
+#define SIL902X_PWR_STATE_CTRL 0x1e
+#define SIL902X_AVI_POWER_STATE_MSK GENMASK(1, 0)
+#define SIL902X_AVI_POWER_STATE_D(l) ((l) & SIL902X_AVI_POWER_STATE_MSK)
+
+#define SI902X_INT_ENABLE 0x3c
+#define SI902X_INT_STATUS 0x3d
+#define SI902X_HOTPLUG_EVENT BIT(0)
+#define SI902X_PLUGGED_STATUS BIT(2)
+
+#define SIL902X_REG_TPI_RQB 0xc7
+
+struct sii902x {
+ struct i2c_client *i2c;
+ struct regmap *regmap;
+ struct drm_bridge bridge;
+ struct drm_connector connector;
+ struct gpio_desc *reset_gpio;
+ struct work_struct hotplug_work;
+};
+
+static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct sii902x, bridge);
+}
+
+static inline struct sii902x *connector_to_sii902x(struct drm_connector *con)
+{
+ return container_of(con, struct sii902x, connector);
+}
+
+static void sii902x_reset(struct sii902x *sii902x)
+{
+ if (!sii902x->reset_gpio)
+ return;
+
+ gpiod_set_value(sii902x->reset_gpio, 1);
+
+ /* The datasheet says treset-min = 100us. Make it 150us to be sure. */
+ usleep_range(150, 200);
+
+ gpiod_set_value(sii902x->reset_gpio, 0);
+}
+
+static void sii902x_connector_destroy(struct drm_connector *connector)
+{
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+}
+
+static enum drm_connector_status
+sii902x_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct sii902x *sii902x = connector_to_sii902x(connector);
+ unsigned int status;
+
+ regmap_read(sii902x->regmap, SI902X_INT_STATUS, &status);
+
+ return (status & SI902X_PLUGGED_STATUS) ?
+ connector_status_connected : connector_status_disconnected;
+}
+
+static const struct drm_connector_funcs sii902x_connector_funcs = {
+ .dpms = drm_atomic_helper_connector_dpms,
+ .detect = sii902x_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = sii902x_connector_destroy,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int sii902x_get_modes(struct drm_connector *connector)
+{
+ struct sii902x *sii902x = connector_to_sii902x(connector);
+ struct regmap *regmap = sii902x->regmap;
+ u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+ unsigned int status;
+ struct edid *edid;
+ int num = 0;
+ int ret;
+
+ ret = regmap_update_bits(regmap, SIL902X_SYS_CTRL_DATA,
+ SIL902X_SYS_CTRL_DDC_BUS_REQ,
+ SIL902X_SYS_CTRL_DDC_BUS_REQ);
+ if (ret)
+ return ret;
+
+ do {
+ ret = regmap_read(regmap, SIL902X_SYS_CTRL_DATA, &status);
+ if (ret)
+ return ret;
+ } while (!(status & SIL902X_SYS_CTRL_DDC_BUS_GRTD));
+
+ ret = regmap_write(regmap, SIL902X_SYS_CTRL_DATA, status);
+ if (ret)
+ return ret;
+
+ edid = drm_get_edid(connector, sii902x->i2c->adapter);
+ drm_mode_connector_update_edid_property(connector, edid);
+ if (edid) {
+ num = drm_add_edid_modes(connector, edid);
+ kfree(edid);
+ }
+
+ ret = drm_display_info_set_bus_formats(&connector->display_info,
+ &bus_format, 1);
+ if (ret)
+ return ret;
+
+ regmap_read(regmap, SIL902X_SYS_CTRL_DATA, &status);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(regmap, SIL902X_SYS_CTRL_DATA,
+ SIL902X_SYS_CTRL_DDC_BUS_REQ |
+ SIL902X_SYS_CTRL_DDC_BUS_GRTD, 0);
+ if (ret)
+ return ret;
+
+ do {
+ ret = regmap_read(regmap, SIL902X_SYS_CTRL_DATA, &status);
+ if (ret)
+ return ret;
+ } while (status & (SIL902X_SYS_CTRL_DDC_BUS_REQ |
+ SIL902X_SYS_CTRL_DDC_BUS_GRTD));
+
+ return num;
+}
+
+static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ /* TODO: check mode */
+
+ return MODE_OK;
+}
+
+static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {
+ .get_modes = sii902x_get_modes,
+ .mode_valid = sii902x_mode_valid,
+};
+
+static void sii902x_bridge_disable(struct drm_bridge *bridge)
+{
+ struct sii902x *sii902x = bridge_to_sii902x(bridge);
+
+ regmap_update_bits(sii902x->regmap, SIL902X_SYS_CTRL_DATA,
+ SIL902X_SYS_CTRL_PWR_DWN,
+ SIL902X_SYS_CTRL_PWR_DWN);
+}
+
+static void sii902x_bridge_enable(struct drm_bridge *bridge)
+{
+ struct sii902x *sii902x = bridge_to_sii902x(bridge);
+
+ regmap_update_bits(sii902x->regmap, SIL902X_PWR_STATE_CTRL,
+ SIL902X_AVI_POWER_STATE_MSK,
+ SIL902X_AVI_POWER_STATE_D(0));
+ regmap_update_bits(sii902x->regmap, SIL902X_SYS_CTRL_DATA,
+ SIL902X_SYS_CTRL_PWR_DWN, 0);
+}
+
+static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adj)
+{
+ struct sii902x *sii902x = bridge_to_sii902x(bridge);
+ struct regmap *regmap = sii902x->regmap;
+ u8 buf[HDMI_INFOFRAME_SIZE(AVI)];
+ struct hdmi_avi_infoframe frame;
+ int ret;
+
+ buf[0] = adj->clock;
+ buf[1] = adj->clock >> 8;
+ buf[2] = adj->vrefresh;
+ buf[3] = 0x00;
+ buf[4] = adj->hdisplay;
+ buf[5] = adj->hdisplay >> 8;
+ buf[6] = adj->vdisplay;
+ buf[7] = adj->vdisplay >> 8;
+ buf[8] = SIL902X_TPI_CLK_RATIO_1X | SIL902X_TPI_AVI_PIXEL_REP_NONE |
+ SIL902X_TPI_AVI_PIXEL_REP_BUS_24BIT;
+ buf[9] = SIL902X_TPI_AVI_INPUT_RANGE_AUTO |
+ SIL902X_TPI_AVI_INPUT_COLORSPACE_RGB;
+
+ ret = regmap_bulk_write(regmap, SIL902X_TPI_VIDEO_DATA, buf, 10);
+ if (ret)
+ return;
+
+ ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj);
+ if (ret < 0) {
+ DRM_ERROR("couldn't fill AVI infoframe\n");
+ return;
+ }
+
+ ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf));
+ if (ret < 0) {
+ DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
+ return;
+ }
+
+ /* Do not send the infoframe header, but keep the CRC field. */
+ regmap_bulk_write(regmap, SIL902X_TPI_AVI_INFOFRAME,
+ buf + HDMI_INFOFRAME_HEADER_SIZE - 1,
+ HDMI_AVI_INFOFRAME_SIZE + 1);
+}
+
+static int sii902x_bridge_attach(struct drm_bridge *bridge)
+{
+ struct sii902x *sii902x = bridge_to_sii902x(bridge);
+ struct drm_device *drm = bridge->dev;
+ int ret;
+
+ drm_connector_helper_add(&sii902x->connector,
+ &sii902x_connector_helper_funcs);
+
+ if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) {
+ dev_err(&sii902x->i2c->dev,
+ "sii902x driver is only compatible with DRM devices supporting atomic updates");
+ return -ENOTSUPP;
+ }
+
+ ret = drm_connector_init(drm, &sii902x->connector,
+ &sii902x_connector_funcs,
+ DRM_MODE_CONNECTOR_HDMIA);
+ if (ret)
+ return ret;
+
+ if (sii902x->i2c->irq > 0)
+ sii902x->connector.polled = DRM_CONNECTOR_POLL_HPD;
+ else
+ sii902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
+
+ drm_mode_connector_attach_encoder(&sii902x->connector, bridge->encoder);
+
+ return 0;
+}
+
+static const struct drm_bridge_funcs sii902x_bridge_funcs = {
+ .attach = sii902x_bridge_attach,
+ .mode_set = sii902x_bridge_mode_set,
+ .disable = sii902x_bridge_disable,
+ .enable = sii902x_bridge_enable,
+};
+
+static const struct regmap_range sii902x_volatile_ranges[] = {
+ { .range_min = 0, .range_max = 0xff },
+};
+
+static const struct regmap_access_table sii902x_volatile_table = {
+ .yes_ranges = sii902x_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(sii902x_volatile_ranges),
+};
+
+static const struct regmap_config sii902x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_table = &sii902x_volatile_table,
+ .cache_type = REGCACHE_NONE,
+};
+
+static irqreturn_t sii902x_interrupt(int irq, void *data)
+{
+ struct sii902x *sii902x = data;
+ unsigned int status = 0;
+
+ regmap_read(sii902x->regmap, SI902X_INT_STATUS, &status);
+ regmap_write(sii902x->regmap, SI902X_INT_STATUS, status);
+
+ if ((status & SI902X_HOTPLUG_EVENT) && sii902x->bridge.dev)
+ drm_helper_hpd_irq_event(sii902x->bridge.dev);
+
+ return IRQ_HANDLED;
+}
+
+static int sii902x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ unsigned int status = 0;
+ struct sii902x *sii902x;
+ u8 chipid[4];
+ int ret;
+
+ sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL);
+ if (!sii902x)
+ return -ENOMEM;
+
+ sii902x->i2c = client;
+ sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config);
+ if (IS_ERR(sii902x->regmap))
+ return PTR_ERR(sii902x->regmap);
+
+ sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(sii902x->reset_gpio)) {
+ dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n",
+ PTR_ERR(sii902x->reset_gpio));
+ return PTR_ERR(sii902x->reset_gpio);
+ }
+
+ sii902x_reset(sii902x);
+
+ ret = regmap_write(sii902x->regmap, SIL902X_REG_TPI_RQB, 0x0);
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_read(sii902x->regmap, SIL902X_REG_CHIPID(0),
+ &chipid, 4);
+ if (ret) {
+ dev_err(dev, "regmap_read failed %d\n", ret);
+ return ret;
+ }
+
+ if (chipid[0] != 0xb0) {
+ dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n",
+ chipid[0]);
+ return -EINVAL;
+ }
+
+ /* Clear all pending interrupts */
+ regmap_read(sii902x->regmap, SI902X_INT_STATUS, &status);
+ regmap_write(sii902x->regmap, SI902X_INT_STATUS, status);
+
+ if (client->irq > 0) {
+ regmap_write(sii902x->regmap, SI902X_INT_ENABLE,
+ SI902X_HOTPLUG_EVENT);
+
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ sii902x_interrupt,
+ IRQF_ONESHOT, dev_name(dev),
+ sii902x);
+ if (ret)
+ return ret;
+ }
+
+ sii902x->bridge.funcs = &sii902x_bridge_funcs;
+ sii902x->bridge.of_node = dev->of_node;
+ ret = drm_bridge_add(&sii902x->bridge);
+ if (ret) {
+ dev_err(dev, "Failed to add drm_bridge\n");
+ return ret;
+ }
+
+ i2c_set_clientdata(client, sii902x);
+
+ return 0;
+}
+
+static int sii902x_remove(struct i2c_client *client)
+
+{
+ struct sii902x *sii902x = i2c_get_clientdata(client);
+
+ drm_bridge_remove(&sii902x->bridge);
+
+ return 0;
+}
+
+static const struct of_device_id sii902x_dt_ids[] = {
+ { .compatible = "sil,sii9022", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sii902x_dt_ids);
+
+static const struct i2c_device_id sii902x_i2c_ids[] = {
+ { "sii9022", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, sii902x_i2c_ids);
+
+static struct i2c_driver sii902x_driver = {
+ .probe = sii902x_probe,
+ .remove = sii902x_remove,
+ .driver = {
+ .name = "sii902x",
+ .of_match_table = sii902x_dt_ids,
+ },
+ .id_table = sii902x_i2c_ids,
+};
+module_i2c_driver(sii902x_driver);
+
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("SIL902x RGB -> HDMI bridges");
+MODULE_LICENSE("GPL");
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
