On May 9, 2011, Thomas Fjellstrom wrote: > On May 9, 2011, Jerome Glisse wrote: > > On Mon, May 9, 2011 at 3:50 PM, Thomas Fjellstrom <thomas@xxxxxxxxxxxxx> > > wrote: > > > On May 7, 2011, Thomas Fjellstrom wrote: > > >> I just switched to using HDMI with my media center, and its causing a > > >> 30+ second delay in the screen turning on, as well as a 7 second delay > > >> in the X startup when it tries to fetch the EDID information. > > >> Basically I don't get any picture at all once KMS initializes until > > >> after X has been up a few seconds. > > >> > > >> The odd thing is the monitor seems to think something is going on, > > >> since it doesn't go to sleep or display its "No Signal" OSD, but just > > >> after X starts up, it pops up the "Input detected/switched" OSD, and > > >> the picture appears. > > >> > > >> The bios, grub2 (in both text mode and graphics mode), and the initial > > >> linux kernel messages all display fine and immediately. Its only once > > >> KMS and radeondrmfb initializes that there's a problem (at least till > > >> X starts up). > > >> > > >> I've just built with a vanila 2.6.38.4 kernel from the stable git > > >> repo, and have played with some EDID settings, trying to disable edid > > >> where I could thinking thats what caused the problem. That doesn't > > >> seem to be the case though. I also tried playing with the video= > > >> kernel option, trying to force disable VGA-1, and set a static mode > > >> for HDMI-A-1, but if I try, it seems to force disable HDMI-A-1 > > >> instead of force the mode. > > >> > > >> With a DVI-D cable instead, the problem goes away. > > >> > > >> Attached are the dmesg and xorg.log files for the latest boot with > > >> HDMI (no video= parameter, and EDID enabled, most settings at > > >> defaults). > > >> > > >> What exactly would cause this, and is there a way I can fix it? > > > > > > I've been playing around with it more, and got it to not blank the > > > screen after KMS init, /once/. So far no luck repeating that success. > > > > > > I've tried late, and early kms init, and currently have the radeon > > > module and firmware compiled into the kernel. Boot times at least are > > > fairly decent, about 8-10s till X starts, but about 25-35s till > > > anything shows up. > > > > > > Some strangeness, I have the kernel set to force the hdmi output to on, > > > with a very specific mode, that X tends to like, the vga port is forced > > > disabled. X is set to ignore EDID, and also set to that specific mode > > > that it tends to auto set itself. Regardless X still wants to pause for > > > 7s 2-3 times while processing EDID info. > > > > > > I've attached the new dmesg and xorg logs from the latest attempts. > > > > > > Note, this only happens with KMS, with HDMI. disabling KMS, or using > > > DVI makes the problem go away. Even grub's own graphical mode works > > > fine, its only once KMS inits that things go bad, and its not till > > > after X is up for a few seconds that something displays on my screen. > > > > > > -- > > > Thomas Fjellstrom > > > thomas@xxxxxxxxxxxxx > > > > Please boot with drm.debug=4 and attach dmesg it should be more > > verbose. You might also want to try booting with radeon.audio=0 > > Hi, attached both one with just drm.debug=4, and one with that and > radeon.audio=0. > > Now, I'm guessing its a bug in my monitor claiming it can do HDMI audio? As > setting radeon.audio=0 seems to have fixed the blanking problem. And the > dmesg logs seem to claim that radeon thinks it can do HDMI audio. > > It also seems to be ignoring the mode I've requested via the video= param. > It at least sees that I want it forced enabled, but claims its 0x0? Or at > least it seems its picking the preferred mode. > > Still have X blocking for up to 14s though. > > Theres also a bunch of repeated log messages from drm now, every second > about it seems to spam the following lines: (the last one is repeated a > bunch of times, with FB:44 or FB:42) > > [ 31.330033] [drm:output_poll_execute], [CONNECTOR:13:VGA-1] status > updated from 2 to 2 > [ 31.435455] [drm:radeon_atombios_connected_scratch_regs], DFP1 connected > [ 31.435463] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status > updated from 1 to 1 > [ 31.437391] [drm:drm_mode_addfb], [FB:42] > > > Cheers, > > Jerome Ok, a bit more news. My monitor does indeed support audio, at least it has volume buttons, so I assume it has speakers, and should support HDMI audio (I have never used it though). -- Thomas Fjellstrom thomas@xxxxxxxxxxxxx _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
