On Thu, 02 Jun 2016, Vinay Simha BN <simhavcs@xxxxxxxxx> wrote:
> Provide a small convenience wrapper that transmits
> ia set_tear_scanline command as suggested by
> Thierry Reding.
>
> Also includes small build fixes from Sumit Semwal.
>
> Cc: Archit Taneja <archit.taneja@xxxxxxxxx>
> Cc: John Stultz <john.stultz@xxxxxxxxxx>
> Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
> Cc: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
> Signed-off-by: Vinay Simha BN <simhavcs@xxxxxxxxx>
> ---
> drivers/gpu/drm/drm_mipi_dsi.c | 23 +++++++++++++++++++++++
> include/drm/drm_mipi_dsi.h | 2 ++
> 2 files changed, 25 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
> index f5d8083..2f0b85c 100644
> --- a/drivers/gpu/drm/drm_mipi_dsi.c
> +++ b/drivers/gpu/drm/drm_mipi_dsi.c
> @@ -983,6 +983,29 @@ int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
> EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
>
> /**
> + * mipi_dsi_set_tear_scanline() - turn on the display module's Tearing Effect
> + * output signal on the TE signal line when display module reaches line N
> + * defined by STS[n:0].
> + * @dsi: DSI peripheral device
> + * @param1: STS[10:8]
> + * @param2: STS[7:0]
> + * Return: 0 on success or a negative error code on failure
> + */
> +int mipi_dsi_set_tear_scanline(struct mipi_dsi_device *dsi,
> + u8 param1, u8 param2)
If you're making a helper, please make using it easy and have *one*
scanline parameter.
BR,
Jani.
> +{
> + u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, param1, param2};
> + ssize_t err;
> +
> + err = mipi_dsi_generic_write(dsi, &payload, sizeof(payload));
> + if (err < 0)
> + return err;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(mipi_dsi_set_tear_scanline);
> +
> +/**
> * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
> * data used by the interface
> * @dsi: DSI peripheral device
> diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
> index 7a9840f..2788dbe 100644
> --- a/include/drm/drm_mipi_dsi.h
> +++ b/include/drm/drm_mipi_dsi.h
> @@ -263,6 +263,8 @@ int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
> u16 end);
> int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
> u16 end);
> +int mipi_dsi_set_tear_scanline(struct mipi_dsi_device *dsi, u8 param1,
> + u8 param2);
> int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
> int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
> enum mipi_dsi_dcs_tear_mode mode);
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
