VOP could use line flag interrupt to detect some target timing.
For example, eDP PSR is interesting in vact_end, then VOP could
configure the line number to vact_end, and wait for line flag
interrupt coming.
Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v2:
- introduce in v2, split VOP line flag changes out
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 63 +++++++++++++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 3 ++
drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 2 +
3 files changed, 68 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 257501f..b2a36db 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -117,6 +117,8 @@ struct vop {
struct completion wait_update_complete;
struct drm_pending_vblank_event *event;
+ struct completion line_flag_completion;
+
const struct vop_data *data;
uint32_t *regsbak;
@@ -427,6 +429,59 @@ static void vop_dsp_hold_valid_irq_disable(struct vop *vop)
spin_unlock_irqrestore(&vop->irq_lock, flags);
}
+/*
+ * (1) each frame starts at the start of the Vsync pulse which is signaled by
+ * the "FRAME_SYNC" interrupt.
+ * (2) the active data region of each frame ends at dsp_vact_end
+ * (3) we should program this same number (dsp_vact_end) into dsp_line_frag_num,
+ * to get "LINE_FLAG" interrupt at the end of the active on screen data.
+ *
+ * VOP_INTR_CTRL0.dsp_line_frag_num = VOP_DSP_VACT_ST_END.dsp_vact_end
+ * Interrupts
+ * LINE_FLAG -------------------------------+
+ * FRAME_SYNC ----+ |
+ * | |
+ * v v
+ * | Vsync | Vbp | Vactive | Vfp |
+ * ^ ^ ^ ^
+ * | | | |
+ * | | | |
+ * dsp_vs_end ------------+ | | | VOP_DSP_VTOTAL_VS_END
+ * dsp_vact_start --------------+ | | VOP_DSP_VACT_ST_END
+ * dsp_vact_end ----------------------------+ | VOP_DSP_VACT_ST_END
+ * dsp_total -------------------------------------+ VOP_DSP_VTOTAL_VS_END
+ */
+
+static void vop_line_flag_irq_enable(struct vop *vop, int line_num)
+{
+ unsigned long flags;
+
+ if (WARN_ON(!vop->is_enabled))
+ return;
+
+ spin_lock_irqsave(&vop->irq_lock, flags);
+
+ VOP_CTRL_SET(vop, line_flag_num_0, line_num);
+ VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 1);
+ vop_cfg_done(vop);
+
+ spin_unlock_irqrestore(&vop->irq_lock, flags);
+}
+
+static void vop_line_flag_irq_disable(struct vop *vop)
+{
+ unsigned long flags;
+
+ if (WARN_ON(!vop->is_enabled))
+ return;
+
+ spin_lock_irqsave(&vop->irq_lock, flags);
+
+ VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 0);
+
+ spin_unlock_irqrestore(&vop->irq_lock, flags);
+}
+
static void vop_enable(struct drm_crtc *crtc)
{
struct vop *vop = to_vop(crtc);
@@ -1154,6 +1209,13 @@ static irqreturn_t vop_isr(int irq, void *data)
ret = IRQ_HANDLED;
}
+ if (active_irqs & LINE_FLAG_INTR) {
+ if (!completion_done(&vop->line_flag_completion))
+ complete(&vop->line_flag_completion);
+ active_irqs &= ~LINE_FLAG_INTR;
+ ret = IRQ_HANDLED;
+ }
+
if (active_irqs & FS_INTR) {
drm_crtc_handle_vblank(crtc);
vop_handle_vblank(vop);
@@ -1252,6 +1314,7 @@ static int vop_create_crtc(struct vop *vop)
init_completion(&vop->dsp_hold_completion);
init_completion(&vop->wait_update_complete);
+ init_completion(&vop->line_flag_completion);
crtc->port = port;
rockchip_register_crtc_funcs(crtc, &private_crtc_funcs);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
index ff4f52e..34fcd03 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
@@ -61,6 +61,9 @@ struct vop_ctrl {
struct vop_reg hpost_st_end;
struct vop_reg vpost_st_end;
+ struct vop_reg line_flag_num_0;
+ struct vop_reg line_flag_num_1;
+
struct vop_reg cfg_done;
};
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
index 6f42e56..bf78892 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
@@ -299,6 +299,8 @@ static const struct vop_ctrl rk3399_ctrl_data = {
.vact_st_end = VOP_REG(RK3399_DSP_VACT_ST_END, 0x1fff1fff, 0),
.hpost_st_end = VOP_REG(RK3399_POST_DSP_HACT_INFO, 0x1fff1fff, 0),
.vpost_st_end = VOP_REG(RK3399_POST_DSP_VACT_INFO, 0x1fff1fff, 0),
+ .line_flag_num_0 = VOP_REG(RK3399_LINE_FLAG, 0xffff, 0),
+ .line_flag_num_1 = VOP_REG(RK3399_LINE_FLAG, 0xffff, 16),
.cfg_done = VOP_REG_MASK(RK3399_REG_CFG_DONE, 0x1, 0),
};
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
