When setting mode via MODE_ID property, drm_atomic_set_mode_prop_for_crtc() does not call drm_mode_set_crtcinfo() which possibly causes: "[drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 32: Can't calculate constants, dotclock = 0!" Whether the error is seen depends on the previous data in state->mode, as state->mode is not cleared when setting new mode. This patch adds drm_mode_set_crtcinfo() call to drm_mode_convert_umode(), which is called in both legacy and atomic paths. This should be fine as there's no reason to call drm_mode_convert_umode() without also setting the crtc related fields. drm_mode_set_crtcinfo() is removed from the legacy drm_mode_setcrtc() as that is no longer needed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- drivers/gpu/drm/drm_crtc.c | 2 -- drivers/gpu/drm/drm_modes.c | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index d2a6d958ca76..06b6e2173697 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2821,8 +2821,6 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, goto out; } - drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); - /* * Check whether the primary plane supports the fb pixel format. * Drivers not implementing the universal planes API use a diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 7def3d58da18..e5e6f504d8cc 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -1518,6 +1518,8 @@ int drm_mode_convert_umode(struct drm_display_mode *out, if (out->status != MODE_OK) goto out; + drm_mode_set_crtcinfo(out, CRTC_INTERLACE_HALVE_V); + ret = 0; out: -- 2.5.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
