Re: [Intel-gfx] [PATCH 06/26] drm/atomic: Add __drm_atomic_get_current_plane_state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 30-05-16 om 17:05 schreef Daniel Vetter:
> On Mon, May 30, 2016 at 01:42:40PM +0200, Maarten Lankhorst wrote:
>> Op 29-05-16 om 20:35 schreef Daniel Vetter:
>>> ... and use it in msm&vc4. Again just want to encapsulate
>>> drm_atomic_state internals a bit.
>>>
>>> The const threading is a bit awkward in vc4 since C sucks, but I still
>>> think it's worth to enforce this. Eventually I want to make all the
>>> obj->state pointers const too, but that's a lot more work ...
>>>
>>> Cc: Eric Anholt <eric@xxxxxxxxxx>
>>> Cc: Rob Clark <robdclark@xxxxxxxxx>
>>> Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
>>> ---
>>>  drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 10 +++------
>>>  drivers/gpu/drm/vc4/vc4_crtc.c           | 11 +++-------
>>>  drivers/gpu/drm/vc4/vc4_drv.h            |  2 +-
>>>  drivers/gpu/drm/vc4/vc4_plane.c          |  5 +++--
>>>  include/drm/drm_atomic.h                 | 36 ++++++++++++++++++++++++++++++++
>>>  5 files changed, 46 insertions(+), 18 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
>>> index 88fe256c1931..6d4086ee0503 100644
>>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
>>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
>>> @@ -383,19 +383,15 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc,
>>>  	 */
>>>  	hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg);
>>>  	drm_atomic_crtc_state_for_each_plane(plane, state) {
>>> -		struct drm_plane_state *pstate;
>>> +		const struct drm_plane_state *pstate;
>>>  		if (cnt >= (hw_cfg->lm.nb_stages)) {
>>>  			dev_err(dev->dev, "too many planes!\n");
>>>  			return -EINVAL;
>>>  		}
>>>  
>>> -		pstate = state->state->plane_states[drm_plane_index(plane)];
>>> +		pstate = __drm_atomic_get_current_plane_state(state->state,
>>> +							      plane);
>>>  
>>> -		/* plane might not have changed, in which case take
>>> -		 * current state:
>>> -		 */
>>> -		if (!pstate)
>>> -			pstate = plane->state;
>>>  		pstates[cnt].plane = plane;
>>>  		pstates[cnt].state = to_mdp5_plane_state(pstate);
>>>  
>>> diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
>>> index 904d0754ad78..703bda170105 100644
>>> --- a/drivers/gpu/drm/vc4/vc4_crtc.c
>>> +++ b/drivers/gpu/drm/vc4/vc4_crtc.c
>>> @@ -405,14 +405,9 @@ static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
>>>  		return -EINVAL;
>>>  
>>>  	drm_atomic_crtc_state_for_each_plane(plane, state) {
>>> -		struct drm_plane_state *plane_state =
>>> -			state->state->plane_states[drm_plane_index(plane)];
>>> -
>>> -		/* plane might not have changed, in which case take
>>> -		 * current state:
>>> -		 */
>>> -		if (!plane_state)
>>> -			plane_state = plane->state;
>>> +		const struct drm_plane_state *plane_state =
>>> +			__drm_atomic_get_current_plane_state(state->state,
>>> +							     plane);
>>>  
>>>  		dlist_count += vc4_plane_dlist_size(plane_state);
>>>  	}
>>> diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
>>> index 37cac59401d7..c799baabc008 100644
>>> --- a/drivers/gpu/drm/vc4/vc4_drv.h
>>> +++ b/drivers/gpu/drm/vc4/vc4_drv.h
>>> @@ -469,7 +469,7 @@ int vc4_kms_load(struct drm_device *dev);
>>>  struct drm_plane *vc4_plane_init(struct drm_device *dev,
>>>  				 enum drm_plane_type type);
>>>  u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist);
>>> -u32 vc4_plane_dlist_size(struct drm_plane_state *state);
>>> +u32 vc4_plane_dlist_size(const struct drm_plane_state *state);
>>>  void vc4_plane_async_set_fb(struct drm_plane *plane,
>>>  			    struct drm_framebuffer *fb);
>>>  
>>> diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
>>> index 4037b52fde31..5d2c3d9fd17a 100644
>>> --- a/drivers/gpu/drm/vc4/vc4_plane.c
>>> +++ b/drivers/gpu/drm/vc4/vc4_plane.c
>>> @@ -690,9 +690,10 @@ u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist)
>>>  	return vc4_state->dlist_count;
>>>  }
>>>  
>>> -u32 vc4_plane_dlist_size(struct drm_plane_state *state)
>>> +u32 vc4_plane_dlist_size(const struct drm_plane_state *state)
>>>  {
>>> -	struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
>>> +	const struct vc4_plane_state *vc4_state =
>>> +		container_of(state, typeof(*vc4_state), base);
>>>  
>>>  	return vc4_state->dlist_count;
>>>  }
>>> diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
>>> index 92c84e9ab09a..4e97186293be 100644
>>> --- a/include/drm/drm_atomic.h
>>> +++ b/include/drm/drm_atomic.h
>>> @@ -109,6 +109,42 @@ drm_atomic_get_existing_connector_state(struct drm_atomic_state *state,
>>>  	return state->connector_states[index];
>>>  }
>>>  
>>> +/**
>>> + * __drm_atomic_get_current_plane_state - get current plane state
>>> + * @state: global atomic state object
>>> + * @plane: plane to grab
>>> + *
>>> + * This function returns the plane state for the given plane, either from
>>> + * @state, or if the plane isn't part of the atomic state update, from @plane.
>>> + * This is useful in atomic check callbacks, when drivers need to peek at, but
>>> + * not change, state of other planes, since it avoids threading an error code
>>> + * back up the call chain.
>>> + *
>>> + * WARNING:
>>> + *
>>> + * Note that this function is in general unsafe since it doesn't check for the
>>> + * required locking for access state structures. Drivers must ensure that it is
>>> + * save to access the returned state structure through other means. One commone
>>> + * example is when planes are fixed to a single CRTC, and the driver knows that
>>> + * the CRTC locks is held already. In that case holding the CRTC locks gives a
>>> + * read-lock on all planes connected to that CRTC. But if planes can be
>>> + * reassigned things get more tricky. In that case it's better to use
>>> + * drm_atomic_get_plane_state and wire up full error handling.
>>> + *
>>> + * Returns:
>>> + *
>>> + * Read-only pointer to the current plane state.
>>> + */
>>> +static inline const struct drm_plane_state *
>>> +__drm_atomic_get_current_plane_state(struct drm_atomic_state *state,
>>> +				     struct drm_plane *plane)
>>> +{
>>> +	if (state->plane_states[drm_plane_index(plane)])
>>> +		return state->plane_states[drm_plane_index(plane)];
>> Could use a debug WARN_ON here. Just in case someone tries to use this for a plane that can't be safely checked:
>>
>> WARN_ON(!plane->state->crtc || !drm_modeset_is_locked(&plane->state->crtc->mutex));
> If you have hw like i915, where you can't move planes, this check isn't
> good enough, because plane->state->crtc might be NULL, but if you hold the
> right crtc mutex it's still perfectly safe. That's why I didn't add that
> check, and instead typed the really long warning.
Wrong! If crtc == NULL, you can set for example a different source rectangle, and plane->state would change from
underneath you since you don't hold the plane mutex.
>> Also use drm_atomic_get_existing_plane_state?
> Hm, feels like overkill since this is a core atomic function. We don't use
> get_existing_* in drm_atomic.c much either.
Ok, but that's an oversight..

Looking at drm_atomic.c it seems to me that drm_atomic_state_default_clear should use for_each_xx_in too..

drm_atomic_get_{crtc,plane}_state uses get_existing_state, drm_atomic_get_connector_state does not, since it duplicated some checks in drm_atomic_get_connector_state.
It is probably worth it to convert drm_atomic_get_connector_state too.

Apart from that I don't see what you mean..

~Maarten

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux