From: Koji Matsuoka <koji.matsuoka.xm@xxxxxxxxxxx> The output format of the RPF must be unified in RGB or YCbCr by specification of the H/W. To unify the output format in RGB in driver, if the input format is YCbCr, the output format must be converted to RGB by CSC (Color Space Conversion). The driver is missing the format setting of the RPF input source, so it does not pass through the process to enable the CSC. This patch adds format setting of the RPF input source. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@xxxxxxxxxxx> [geert: Rebased, s/fmtinfo/rpf->fmtinfo] Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- drivers/media/platform/vsp1/vsp1_drm.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c index ff961b2..c5ee06b 100644 --- a/drivers/media/platform/vsp1/vsp1_drm.c +++ b/drivers/media/platform/vsp1/vsp1_drm.c @@ -383,6 +383,12 @@ static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1, /* BRU sink, propagate the format from the RPF source. */ format.pad = bru_input; + format.format.code = rpf->fmtinfo->mbus; + + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL, + &format); + if (ret < 0) + return ret; ret = v4l2_subdev_call(&vsp1->bru->entity.subdev, pad, set_fmt, NULL, &format); -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
