Re: [PATCH V5 0/3] soc/tegra: Add support for IO pads power and voltage control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jon/Thierry,

On Thursday 12 May 2016 05:51 PM, Laxman Dewangan wrote:
The IO pins of Tegra SoCs are grouped for common control of IO interface
like setting voltage signal levels and power state of the interface. The
group is generally referred as IO pads. The power state and voltage control
of IO pins can be done at IO pads level.

Tegra124 onwards IO pads support the power down state when system is
active. The voltage levels on IO pads are auto detected on Tegra124/
Tegra132 but it is not in Tegra210. For Tegra210, the SW need to
explicitly configure the voltage levels of IO pads

This series add the interface for the IO pad power state and voltage
configurations. Modifies the client to use new APIs.
Register the child devices to provide the client interface to configure
IO pads power state and voltage from Device tree.


Any comment on this series?
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux