On Mon, May 16, 2016 at 8:47 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> The RGB bus can be used in several configurations, one of which being the
> RGB666.
>
> Add a pinctrl group for that case.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Acked-by: Chen-Yu Tsai <wens@xxxxxxxx>
> ---
> arch/arm/boot/dts/sun5i-a13.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
> index 263d46dbc7e6..79b5d513c142 100644
> --- a/arch/arm/boot/dts/sun5i-a13.dtsi
> +++ b/arch/arm/boot/dts/sun5i-a13.dtsi
> @@ -237,6 +237,16 @@
> &pio {
> compatible = "allwinner,sun5i-a13-pinctrl";
>
> + lcd_rgb666_pins: lcd_rgb666@0 {
> + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
> + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
> + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
> + "PD24", "PD25", "PD26", "PD27";
> + allwinner,function = "lcd0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
Just a thought: would we ever need to increase the drive strength for very high
resolutions?
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> uart1_pins_a: uart1@0 {
> allwinner,pins = "PE10", "PE11";
> allwinner,function = "uart1";
> --
> 2.8.2
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
