When the adv7511 i2c client doesn't have an interrupt line, we observe a
deadlock on caused by trying to lock drm device's mode_config.mutex twice
in the same context.
Here is the sequence that causes it:
ioctl DRM_IOCTL_MODE_GETCONNECTOR from userspace
drm_mode_getconnector (acquires mode_config mutex)
connector->fill_modes()
drm_helper_probe_single_connector_modes
connector_funcs->get_modes
adv7511_encoder_get_modes
adv7511_get_edid_block
adv7511_irq_process
drm_helper_hpd_irq_event (acquires mode_config mutex again)
In adv7511_irq_process, don't call drm_helper_hpd_irq_event when not
called from the interrupt handler. It doesn't serve any purpose there
anyway.
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/i2c/adv7511.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
index fec5627..c00d11d 100644
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -427,7 +427,7 @@ static bool adv7511_hpd(struct adv7511 *adv7511)
return false;
}
-static int adv7511_irq_process(struct adv7511 *adv7511)
+static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
{
unsigned int irq0, irq1;
int ret;
@@ -443,7 +443,7 @@ static int adv7511_irq_process(struct adv7511 *adv7511)
regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
- if (irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder)
+ if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder)
drm_helper_hpd_irq_event(adv7511->connector.dev);
if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
@@ -461,7 +461,7 @@ static irqreturn_t adv7511_irq_handler(int irq, void *devid)
struct adv7511 *adv7511 = devid;
int ret;
- ret = adv7511_irq_process(adv7511);
+ ret = adv7511_irq_process(adv7511, true);
return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
}
@@ -478,7 +478,7 @@ static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout)
adv7511->edid_read, msecs_to_jiffies(timeout));
} else {
for (; timeout > 0; timeout -= 25) {
- ret = adv7511_irq_process(adv7511);
+ ret = adv7511_irq_process(adv7511, false);
if (ret < 0)
break;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
