On 06/05/16 11:45, Laxman Dewangan wrote: > Use BIT macro for register field definition and make constant as U > when using in shift operator like (3 << 30) to (3U << 30) > > Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx> > > --- > Changes from V1: > - Remove the indenting of line which is not for BIT macro usage. > Changes from V2: > - None > --- > drivers/soc/tegra/pmc.c | 40 ++++++++++++++++++++-------------------- > 1 file changed, 20 insertions(+), 20 deletions(-) > > diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c > index bb17345..2c3f1f9 100644 > --- a/drivers/soc/tegra/pmc.c > +++ b/drivers/soc/tegra/pmc.c > @@ -45,28 +45,28 @@ > #include <soc/tegra/pmc.h> > > #define PMC_CNTRL 0x0 > -#define PMC_CNTRL_SYSCLK_POLARITY (1 << 10) /* sys clk polarity */ > -#define PMC_CNTRL_SYSCLK_OE (1 << 11) /* system clock enable */ > -#define PMC_CNTRL_SIDE_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */ > -#define PMC_CNTRL_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */ > -#define PMC_CNTRL_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ > -#define PMC_CNTRL_INTR_POLARITY (1 << 17) /* inverts INTR polarity */ > +#define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */ > +#define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */ > +#define PMC_CNTRL_SIDE_EFFECT_LP0 BIT(14) /* LP0 when CPU pwr gated */ > +#define PMC_CNTRL_CPU_PWRREQ_POLARITY BIT(15) /* CPU pwr req polarity */ > +#define PMC_CNTRL_CPU_PWRREQ_OE BIT(16) /* CPU pwr req enable */ > +#define PMC_CNTRL_INTR_POLARITY BIT(17)/* inverts INTR polarity */ > > #define DPD_SAMPLE 0x020 > -#define DPD_SAMPLE_ENABLE (1 << 0) > -#define DPD_SAMPLE_DISABLE (0 << 0) > +#define DPD_SAMPLE_ENABLE BIT(0) > +#define DPD_SAMPLE_DISABLE (0 << 0) > > #define PWRGATE_TOGGLE 0x30 > -#define PWRGATE_TOGGLE_START (1 << 8) > +#define PWRGATE_TOGGLE_START BIT(8) > > #define REMOVE_CLAMPING 0x34 > > #define PWRGATE_STATUS 0x38 > > #define PMC_SCRATCH0 0x50 > -#define PMC_SCRATCH0_MODE_RECOVERY (1 << 31) > -#define PMC_SCRATCH0_MODE_BOOTLOADER (1 << 30) > -#define PMC_SCRATCH0_MODE_RCM (1 << 1) > +#define PMC_SCRATCH0_MODE_RECOVERY BIT(31) > +#define PMC_SCRATCH0_MODE_BOOTLOADER BIT(30) > +#define PMC_SCRATCH0_MODE_RCM BIT(1) > #define PMC_SCRATCH0_MODE_MASK (PMC_SCRATCH0_MODE_RECOVERY | \ > PMC_SCRATCH0_MODE_BOOTLOADER | \ > PMC_SCRATCH0_MODE_RCM) > @@ -77,14 +77,14 @@ > #define PMC_SCRATCH41 0x140 > > #define PMC_SENSOR_CTRL 0x1b0 > -#define PMC_SENSOR_CTRL_SCRATCH_WRITE (1 << 2) > -#define PMC_SENSOR_CTRL_ENABLE_RST (1 << 1) > +#define PMC_SENSOR_CTRL_SCRATCH_WRITE BIT(2) > +#define PMC_SENSOR_CTRL_ENABLE_RST BIT(1) > > #define IO_DPD_REQ 0x1b8 > -#define IO_DPD_REQ_CODE_IDLE (0 << 30) > -#define IO_DPD_REQ_CODE_OFF (1 << 30) > -#define IO_DPD_REQ_CODE_ON (2 << 30) > -#define IO_DPD_REQ_CODE_MASK (3 << 30) > +#define IO_DPD_REQ_CODE_IDLE (0 << 30) > +#define IO_DPD_REQ_CODE_OFF (1U << 30) > +#define IO_DPD_REQ_CODE_ON (2U << 30) > +#define IO_DPD_REQ_CODE_MASK (3U << 30) > > #define IO_DPD_STATUS 0x1bc > #define IO_DPD2_REQ 0x1c0 > @@ -96,10 +96,10 @@ > #define PMC_SCRATCH54_ADDR_SHIFT 0 > > #define PMC_SCRATCH55 0x25c > -#define PMC_SCRATCH55_RESET_TEGRA (1 << 31) > +#define PMC_SCRATCH55_RESET_TEGRA BIT(31) > #define PMC_SCRATCH55_CNTRL_ID_SHIFT 27 > #define PMC_SCRATCH55_PINMUX_SHIFT 24 > -#define PMC_SCRATCH55_16BITOP (1 << 15) > +#define PMC_SCRATCH55_16BITOP BIT(15) > #define PMC_SCRATCH55_CHECKSUM_SHIFT 16 > #define PMC_SCRATCH55_I2CSLV1_SHIFT 0 Acked-by: Jon Hunter <jonathanh@xxxxxxxxxx> Cheers Jon _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
