On 05/03/2016 07:22 AM, Xinliang Liu wrote:
On 9 March 2016 at 18:57, Archit Taneja <architt@xxxxxxxxxxxxxx> wrote:
ADV7533 is a DSI to HDMI encoder chip. It's like ADV7511, but with an
additional DSI RX block that takes in DSI video mode output.
Trying to get this driver merged has had some challenges:
- ADV7533 has an I2C control bus, but acts as a DSI peripheral too.
After discussions, it was concluded that we'd want to provide an
API to create MIPI DSI devices, rather than expose two different
interfaces on DT. The first version [1] tried the former approach
the second version [2] showed how the driver would look like if
exposed 2 DT nodes. This lateset patchset relies on the MIPI DSI
device creation API provided by [3], this has been accepted and
should be merged for 4.6.
- The driver was designed as an I2C slave encoder. When ADV7533
patches were posted [1], it was modelled as a bridge, but ADV7511
and others were still left as I2C slave encoders. This wasn't
accepted. After discussions, it was decided that ADV7511 too would
be converted into a bridge driver, and all the users of ADV7511
should assume it is a bridge. This bridge conversion was done in
[4]. There is still some debate over whether the bridge driver be
involved in the connector creation, or the KMS driver that has
the whole view of the display pipeline. This discussion shouldn't
affect this patch set, though.
This patch set enables ADV7533 support with the above two issues
now resolved. It also incorporates ADV7533 specific features and fixes
that we've discovered since the first version of this patch was posted.
Tested on ADV7533 chips on DB410c. It should work on the Hikey board too.
I'd appreaciate if someone could test it on a ADV7511 platform since I
don't have one.
[4]
https://lists.freedesktop.org/archives/dri-devel/2016-January/098287.html
[3]
https://lkml.org/lkml/2016/2/12/67
[2]
https://lists.freedesktop.org/archives/dri-devel/2015-September/089884.html
[1]:
https://lists.freedesktop.org/archives/dri-devel/2015-July/087088.html
Archit Taneja (7):
drm/i2c: adv7511: Convert to drm_bridge
drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled
drm/i2c: adv7511: Initial support for ADV7533
drm/i2c: adv7511: Create a MIPI DSI device
drm/i2c: adv7511: Use internal timing generator
drm/i2c: adv7511: Change number of DSI lanes dynamically
dt-bindings: drm/bridge: Update bindings for ADV7533
.../bindings/display/bridge/adi,adv7511.txt | 25 +-
drivers/gpu/drm/i2c/adv7511.c | 539 +++++++++++++++++----
2 files changed, 476 insertions(+), 88 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
This patch set is Tested-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx>
Thanks for testing!
Archit
Thanks
-xinliang
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum, hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
