Hi Akshay, Am Dienstag, den 26.04.2016, 13:40 -0400 schrieb Akshay Bhat: > From: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx> > > Add support for reading EDID over Display Data Channel. If no DDC > adapter is available, falls back to hardcoded EDID or display-timings > node as before. > > Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx> > Signed-off-by: Akshay Bhat <akshay.bhat@xxxxxxxxxxx> > Acked-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > --- > > Hi Philipp, > > I found this patch to add DDC support to imx-ldb at: > https://patchwork.kernel.org/patch/5207231/ > > Looks like it never made it to the upstream kernel. > I have rebased this on 4.6-rc5 and tested the same. Thanks for picking this up. Please also update the binding docs in Documentation/devicetree/bindings/display/imx/ldb.txt. > Thanks, > Akshay > > v1 -> v2: > Rebase to 4.6-rc5 > Add check for channel->panel before fallback to display-timings node > > drivers/gpu/drm/imx/imx-ldb.c | 38 ++++++++++++++++++++++++++++++-------- > 1 file changed, 30 insertions(+), 8 deletions(-) > > diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c > index a58eee5..67706c9 100644 > --- a/drivers/gpu/drm/imx/imx-ldb.c > +++ b/drivers/gpu/drm/imx/imx-ldb.c > @@ -59,6 +59,7 @@ struct imx_ldb_channel { > struct drm_encoder encoder; > struct drm_panel *panel; > struct device_node *child; > + struct i2c_adapter *ddc; > int chno; > void *edid; > int edid_len; > @@ -107,6 +108,9 @@ static int imx_ldb_connector_get_modes(struct drm_connector *connector) > return num_modes; > } > > + if (!imx_ldb_ch->edid && imx_ldb_ch->ddc) > + imx_ldb_ch->edid = drm_get_edid(connector, imx_ldb_ch->ddc); > + > if (imx_ldb_ch->edid) { > drm_mode_connector_update_edid_property(connector, > imx_ldb_ch->edid); > @@ -554,6 +558,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) > for_each_child_of_node(np, child) { > struct imx_ldb_channel *channel; > struct device_node *port; > + struct device_node *ddc_node; For alphabetic and/or aesthetic reasons, would you mind moving this up one line? > ret = of_property_read_u32(child, "reg", &i); > if (ret || i < 0 || i > 1) > @@ -595,14 +600,30 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) > } > } > > - edidp = of_get_property(child, "edid", &channel->edid_len); > - if (edidp) { > - channel->edid = kmemdup(edidp, channel->edid_len, > - GFP_KERNEL); > - } else if (!channel->panel) { > - ret = of_get_drm_display_mode(child, &channel->mode, 0); > - if (!ret) > - channel->mode_valid = 1; > + ddc_node = of_parse_phandle(child, "ddc-i2c-bus", 0); > + if (ddc_node) { > + channel->ddc = of_find_i2c_adapter_by_node(ddc_node); If channel->ddc is NULL after this, we should probably warn. > + of_node_put(ddc_node); > + } > + > + if (!channel->ddc) { > + /* if no DDC available, fallback to hardcoded EDID */ > + dev_dbg(dev, "no ddc available\n"); > + > + edidp = of_get_property(child, "edid", > + &channel->edid_len); > + if (edidp) { > + channel->edid = kmemdup(edidp, > + channel->edid_len, > + GFP_KERNEL); > + } else if (!channel->panel) { > + /* fallback to display-timings node */ > + ret = of_get_drm_display_mode(child, > + &channel->mode, > + 0); > + if (!ret) > + channel->mode_valid = 1; > + } > } > > channel->bus_format = of_get_bus_format(dev, child); > @@ -647,6 +668,7 @@ static void imx_ldb_unbind(struct device *dev, struct device *master, > channel->encoder.funcs->destroy(&channel->encoder); > > kfree(channel->edid); > + i2c_put_adapter(channel->ddc); > } > } > regards Philipp _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
