On Fri, Apr 22, 2016 at 10:58:34AM +0530, Sharma, Shashank wrote: > Thanks for the review Daniel. > My comments inline. > > Regards > Shashank > On 4/21/2016 8:34 PM, Daniel Vetter wrote: > >On Fri, Mar 25, 2016 at 01:47:35PM +0530, Shashank Sharma wrote: > >>HDMI 2.0/CEA-861-F introduces two new aspect ratios: > >>- 64:27 > >>- 256:135 > >> > >>This patch adds support for these aspect ratios in > >>I915 driver, at various places. > >> > >>Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx> > > > >Ok, we discussed this a bit internally and I had some questions. Reading > >this series patches make sense up to this one, but here I have a few > >questions/comments. > > > >>--- > >> drivers/gpu/drm/drm_modes.c | 12 ++++++++++++ > >> drivers/gpu/drm/i915/intel_hdmi.c | 6 ++++++ > >> drivers/gpu/drm/i915/intel_sdvo.c | 6 ++++++ > >> 3 files changed, 24 insertions(+) > >> > >>diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c > >>index 6e66136..11f219a 100644 > >>--- a/drivers/gpu/drm/drm_modes.c > >>+++ b/drivers/gpu/drm/drm_modes.c > >>@@ -1482,6 +1482,12 @@ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, > >> case HDMI_PICTURE_ASPECT_16_9: > >> out->flags |= DRM_MODE_FLAG_PAR16_9; > >> break; > >>+ case HDMI_PICTURE_ASPECT_64_27: > >>+ out->flags |= DRM_MODE_FLAG_PAR64_27; > >>+ break; > >>+ case DRM_MODE_PICTURE_ASPECT_256_135: > >>+ out->flags |= DRM_MODE_FLAG_PAR256_135; > >>+ break; > >> case HDMI_PICTURE_ASPECT_NONE: > >> case HDMI_PICTURE_ASPECT_RESERVED: > >> default: > >>@@ -1544,6 +1550,12 @@ int drm_mode_convert_umode(struct drm_display_mode *out, > >> case DRM_MODE_FLAG_PAR16_9: > >> out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_16_9; > >> break; > >>+ case DRM_MODE_FLAG_PAR64_27: > >>+ out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_64_27; > >>+ break; > >>+ case DRM_MODE_FLAG_PAR256_135: > >>+ out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_256_135; > >>+ break; > >> default: > >> out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE; > >> } > > > >Above two parts is core enabling, I guess those should be squashed into > >the preceeding patch? > > > Sure, we can do this. > The idea was to create a separate patch for new aspect ratio, so that one > can segregate HDMI 2.0 patches and HDMI 1.4 patches. If you still recommend > this, I can move this part in next patch. Definitely a good idea, and you have that separate patch already in "drm: Add flags for new aspect ratios". I just think that the above 2 hunks belong into the core patch, not the i915 enabling patch. > >>diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c > >>index e2dab48..bc8e2c8 100644 > >>--- a/drivers/gpu/drm/i915/intel_hdmi.c > >>+++ b/drivers/gpu/drm/i915/intel_hdmi.c > >>@@ -1545,6 +1545,12 @@ intel_hdmi_set_property(struct drm_connector *connector, > >> case DRM_MODE_PICTURE_ASPECT_16_9: > >> intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_16_9; > >> break; > >>+ case DRM_MODE_PICTURE_ASPECT_64_27: > >>+ intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_64_27; > >>+ break; > >>+ case DRM_MODE_PICTURE_ASPECT_256_135: > >>+ intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_256_135; > >>+ break; > >> default: > >> return -EINVAL; > >> } > >>diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c > >>index fae64bc..370e4f9 100644 > >>--- a/drivers/gpu/drm/i915/intel_sdvo.c > >>+++ b/drivers/gpu/drm/i915/intel_sdvo.c > >>@@ -2071,6 +2071,12 @@ intel_sdvo_set_property(struct drm_connector *connector, > >> case DRM_MODE_PICTURE_ASPECT_16_9: > >> intel_sdvo->aspect_ratio = HDMI_PICTURE_ASPECT_16_9; > >> break; > >>+ case DRM_MODE_PICTURE_ASPECT_64_27: > >>+ intel_sdvo->aspect_ratio = HDMI_PICTURE_ASPECT_64_27; > >>+ break; > >>+ case DRM_MODE_PICTURE_ASPECT_256_135: > >>+ intel_sdvo->aspect_ratio = HDMI_PICTURE_ASPECT_256_135; > >>+ break; > >> default: > >> return -EINVAL; > >> } > > > >The trouble with the aspect_ratio prop as currently implemented is that we > >currently unconditionally overwrite adjusted_mode->picture_aspect_ratio > >with it. > > > >But your patches here move the aspect ratio handling into > >drm_mode_modeinfo (uabi) and drm_display_mode (kernel-internal), where it > >imo belongs. But we need to figure out how to the interaction with the > >property correctly. What's probably needed is a new value in the > >aspect_ratio enum called "default", which selects the aspect_ratio from > >the mode. Only when userspace overrides (NONE, or one of the CEA aspect > >ratios) would we obey the aspect_ratio of the property. Otherwise the > >aspect ratio stored in the mode would be lost. > This is exactly how we have handled this in Android branch(with NONE as > default), thanks for the suggestion. I will incorporate this in next patch > set. Yeah, we can't reuse NONE in case someone wants to explicitly have no aspect ratio (which means we'll not transmit the VIC code in the infoframes most likely). At least I think adding a new DEFAULT instead of overloading NONE is the better approach. > >The other bit that I can't find in this series is making sure we compute > >the VIC correctly for the new modes. Or does that magically work correctly > >since we compare the full mode when selecting VICs? > > > Yes, we are saving the right VIC from EDID, so the VIC is now a part of the > mode flags, all we have to do extract this and write during preparing > AVI-IF, we have a small one line patch for that. I will add that too in the > next series. Ah I was a bit unclear. But reading more code it's indeed that we have aspect-ratio already stored in the edid parsing code for the VIC modes in the static table. And with your kernel-mode to umode patches it'll show up in the userspace mode list. And then userspace can request that mode, and umode to kernel-mode will preserve it. And finally we can compute the right VIC from that again. So seems solid, only thing to change is how we take the i915 property into account. On that topic: Do we really need to keep that property, or could we just remove it? I assume the only real user is android, and that's still closed, so we could just nuke it I guess ;-) That would be even simpler. And with the new flags userspace still has the option to override the aspect ratio mode if it wants to. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
